Chauvet 4-Pin Xlr Extension Cable 16"

Chauvet 4-pin Xlr Extension Cable 16"

Product Code: eq48755
Availability: In Stock

$47.79 $74.07

Qty

14 reviews Write a review

Description
Reviews (14)

The CHAUVET 4-Pin XLR Extension Cable 16"from CHAUVET 4-Pin XLR Extension Cable 16"is a 48 VDC output connector for the Epix Drive 900 that provides power to the Epix Strip Tour, Strip Tour 50, and Bar Tour.

Output Cable for Epix Drive 900

General
Connector 1	XLR 4-Pin Female
Connector 2	XLR 4-Pin Male
Cable Length	16" / 40.64 cm
Packaging Info
Package Weight	0.25 lb
Box Dimensions (LxWxH)	6.9 x 6.25 x 1.85"

Related Questions and Answers

Q: 1. How long is the actual cable on this unit? Or does the 9 measurement include the head and tail connectors?

A: Cable is 9 sans connector - but too short for me couldnt use.

Q: 2. Would this adapter enable me to attach a Synco shotgun mic to a Sony A6700 and record from the Synco straight into the camera?

A: The Movo Photo TCB6 XLR 3-Pin Female to 3.5mm TRS Male Adapter Cable (16") will work with microphones which do not require phantom power. If your microphone requires phantom power, you cannot use an adapter cable to connect it to a camera's 3.5mm microphone input jack.

Q: 3. Wire Gauge? AMP current capacity? Shielding type?

A: The following cable is a 24 awg cable which is shielded and can support a current amp capacity of 14.2 amps.

Q: 4. Is there anything special about these cables? ie will a normal TRS to BNC/XLR/LEMO etc cable work the same?

A: Tentacle Sync C04 cable is built to send the signal in one direction from a Tentacle Sync device into an XLR input. Here is a link to the Tentacle Sync page for it, with further details. https://tentaclesync.zendesk.com/hc/en-us/articles/115005320425-Pinouts-and-wiring-diagrams-for-Tentacle-cables

Q: 5. will this D-Tap work with Canon C500 Mark II?

A: Yes, the Tilta D-Tap to 4-Pin XLR Cable (14") will work with the Canon EOS C500 Mark II 5.9K Full-Frame Camera Body (EF Mount, No CFexpress Card).

Q: 6. Would this work on vmounts also?

A: Yes If the V-Lock battery has a PowerTap female plug on it.

Q: 7. Why does the photo a show 3-pin to 3-pin XLR cable?

A: Thank you for spotting this error. We will update this image shortly.

Q: 8. Will the Tilta D-Tap work with Canon C500 mark II?

A: Yes, the Tilta D-Tap to 4-Pin XLR Cable (14") will power the Canon EOS C500 Mark II 5.9K Full-Frame Camera Body (EF Mount, No CFexpress Card).

Q: 9. Does this cable rotate around the XLR end? Am looking for a cable that has the cord going vertically up the 'top' of the xlr end (pins being the 'bottom') if that makes sense- to power the YAGH on the GH4.

A: I believe you were looking for a cable like this model.http://www.bhphotovideo.com/c/product/341340-REG/Switronix_PT_XLR_PTXLR_28_Power_Tap_to.html

Q: 10. How long is this cable?

A: It's 3 feet long.

Jonathan	09/09/2024
[0.25 lb] Does the job. Well built 5

Julian	18/08/2024
[XLR 4-Pin Male] I got this to provide power to my Canon C500 mkii, happy to say it works perfectly. You can reset the angle so you can have the wire come out at whatever angle you want. 5

Blaine	17/08/2024
[0.25 lb] It works perfectly. 5

Jeremy	29/07/2024
[0.25 lb] Great for MoVi with Venice. 5

Carter	23/07/2024
[XLR 4-Pin Male] Lex is the best. 5

Ryan	09/07/2024
[0.25 lb] I work with volunteers at a church and few people take the time to read the cable to see if it's audio or data. By using the five pin DMX cables I avoid potential issues of the wrong cable being used. 5

Sheldon	26/06/2024
[XLR 4-Pin Male] Does what it's supposed to do. 5

tpgnf	19/05/2024
[0.25 lb] Great for getting power from camera battery to accessories- no more AC cords! 5

Ryan	17/05/2024
[0.25 lb] I got this to use at our church because I work with volunteers and it's difficult for them to see the difference between a XLR cable and a three pin DMX. The five pins makes it more obvious :o) 5