Its small size belies the power of the IndiPRO Tools 120Wh Micro-Series V-Mount Li-Ion Battery, which can handle power draws of up to 12A. This battery mounts on a standard-sized V-mount battery plate. It's suitable for use on smaller camera bodies and for a variety of applications that benefit from a small footprint that doesn't sacrifice performance. You can power smaller cameras for extended run times via the battery's D-Tap output port, using a variety of optional D-Tap adapter cables. The battery's 8.35Ah capacity and 14.8V output are sufficient to power most professional cameras.

In addition to the V-mount power output for powering cameras and lights, this Micro-Series battery features both a D-Tap and a USB power output. The D-Tap output can be used to power a light source, monitor, recorder, or other device on your rig while the USB port gives you a convenient way of charging your smartphone and USB accessories while you shoot. A five-LED gauge displays the battery's remaining power.

120Wh Li-Ion V-Mount Battery    Mounts on Standard-Size Battery Plate    Supports up to 12A Continuous Draw    D-Tap and USB Accessory Outputs    5-LED Power Gauge    Compact Form-Factor

High capacity, small form factor

Integrated D-Tap and USB accessory power outlets

Battery supports a maximum power draw of 12A

Related Questions and Answers

Q: 1. Is this battery compatible with the Hollyland Syscom 421 receiver? It's a recommended accessory, but the max wattage for the receiver is 50W.

A: Yes. The following unit accepts all v-mount battery units.

Q: 2. Is this compatible with the Godox VL150? The power supply says input 100-240v @2.5A max and output 16.8V / 10A, 168W. Thanks!

A: Yes, you can use this battery on the Godox lights.

Q: 3. Does this battery worknwith the new Canon R5 C? If so, about how much time will it last? The normal LP-E6NH last 30 to 45 min in video mode.

A: Yes, it's possible to use a large battery with a D-Tap (or P-Tap) power port such as the IndiPRO Tools Micro-Series V-Mount Li-Ion Battery (98Wh) (B&H# INVMP98S) with the Canon EOS R5 C Mirrorless Cinema Camera (B&H# CAER5C). The battery itself would need to be mounted somewhere else such as on a battery plate attached to a rod system since it is much too large to fit into the battery compartment of the camera. You would then connect a cable such as the Anton Bauer P-Tap to Canon 9V Barrel Cable (20") (B&H# ANPC9RBSC) to a DC coupler such as the Canon DR-E6C DC Coupler for EOS R5 C (B&H# CADRE6C) which would go in the battery compartment of the R5 C. It would last for hours of use.

Q: 4. Is this charger kit compatible with other brands and voltages and amperages/wattages of V Mount batteries? Like say, the GEN ENERGY G-B100 14.4V, 195Wh Li-Ion V-Mount Battery?

A: We would strongly advise against using this on other brands, as chemistry may differ and serious damage can potentially occur.

Q: 5. Can I charge this battery while still attached to the camera?

A: With the camera off, it would be possible to charge the IndiPRO Tools Micro-Series V-Mount Li-Ion Battery (98Wh) (B&H# INVMP98S) through its D-Tap port while it is attached to the battery plate of a camera.

Q: 6. Has anyone tried to take these on a plane?

A: Unfortunately, 159Wh batteries are the largest batteries that you can bring on flight. IndiPRO Tools Micro-Series 270Wh Li-Ion Batteries would have to be shipped by ground to the destination required. The short answers are: All batteries MUST be carried on, NEVER checked in luggage. Up to 99Wh, each crew member may carry (8) eight plus one on each device ( camera, monitor, etc.) 100Wh-159Wh Each member may carry (2)two plus one on each device. 160Wh+ Cannot be brought on a flight or air-shipped.

Q: 7. Will this work on the sony a6600?

A: The supplied cable on the battery plate will not work with the Sony a6600. You can purchase the battery here: https://www.bhphotovideo.com/c/product/1348237-REG/indipro_tools_vmp98s_micro_series_98wh_v_mount_li_ion.html?sts=pi&pim=Y Keep in mind, this battery does not come with a charger. Then, you can use this dummy battery + D-tap cable and connect that to the V-mount battery: https://www.bhphotovideo.com/c/product/1592221-REG/kondor_blue_kb_dt_sa7s_db_d_tap_to_sony.html

Q: 8. Can I recharge the battery without the charger via USB A?

A: IndiPro states that the USB port is an accessory output only.

Q: 9. will it work with Seetec 4K monitor?

A: Yes, the IndiPRO Tools 2 x Micro-Series 98Wh Li-Ion V-Mount Batteries with Dual V-Mount Battery Charger Kit will power the Seetec 4K monitor as well as other monitors that take a V-Mount battery.

Q: 10. Will the USB-A on the battery supply enough voltage to run the Canon R5 using the USB-C? Is it a power delivery port?

A: No, The USB output is not PD or 9v which is the Requirement for the R5C. The USB port on this IndiPRO Tools Micro-Series V-Mount Li-Ion Battery is 5v.