This IndiPRO Tools 95Wh 4-Battery Kit Quad Pro Charger Gold Mountfrom IndiPRO Tools 95Wh 4-Battery Kit Quad Pro Charger Gold Mountoutputs 14.8V, has a capacity of 6.6Ah, and supports up to a 10A draw. Its features include a Samsung cell, a weight of slightly more than 1.5 pounds, and a standard D-Tap port for powering accessories via a separately available cable. For quick status checks, an integrated 4-bar LED gauge displays the battery's remaining power.

4 x Compact 95Wh Gold Mount Batteries    4-Bay Charger    Simultaneous Charging    Charges at 2.5 Amps Per Bay    Power a Fleet of Pro Video Equipment

Compact size suited for use with smaller cameras, monitors, lights, and accessories

14.8V, 6.6Ah output with 95Wh capacity

4-bar LED remaining-power display

Standard Gold-mount compatibility

2-pin D-Tap for powering accessories directly from the battery

Related Questions and Answers

Q: 1. Are these compatible with Aputure 300D II?

A: Yes, these batteries are compatible with the Aputure 300D II. Inserting one battery in the Controller Box will give a maximum output of 50%. Inserting 2 batteries will give a maximum output of 100%.

Q: 2. Working for URSA mini?

A: This will work on the Ursa Mini, just as long as you also have a V-Lock Battery Plate on the camera.

Q: 3. Does the charger stop charging when the battery is completely charged?

A: The IndiPRO Tools Quad Pro Battery Charger (V-Mount) does have an auto sense feature built in that will stop sending power to a batter once it has been fully charged.

Q: 4. I am trying to charge this battery, but I think I might be doing something wrong. I am plugging the unit into the wall and leaving the light off for several hours, but it is not taking a charge. I am not using a charger. I am using the actual wall plug in that came with the battery and the Aputure LS1 LED light. Can somebody advise me on how to charge this battery? Any advice would be greatly appreciated. Thank you so much!

A: This battery is meant to be charged through the D-Tap connection on the side of it with a wall plug type of charger. (The D-Tap has two copper colored holes) Does the wall plug you are using look like the one attached? You connect the battery to your electrical system with the wall plug power adapter. You mention leaving the light off for several hours, and I am not sure what light you mean. I can only think that you are in a home where wall outlets are controlled by wall switches and you are not only turning out lights but also the power to the wall plug as well.

Q: 5. Around how long will it charge 4pcs of SWIT S-8110S 126Wh V-Mount Battery? Thanks!

A: Battery run and charge times are so situation dependent, manufacturer's are unable to post this seemingly obvious information. In the process of determining the time the process takes, consideration must be made regarding the size of the battery, how depleted it is and then multiply by how many batteries need to be charged. The best answer we can give is an guesstimate of 2-4-6 hours.

Q: 6. Will the DC output be enough to power a BMD Ursa Mini 12k camera?

A: Yes, the IndiPRO Tools Quad Pro Battery Charger (V-Mount) XLR, produces up to 15V and the Blackmagic Design URSA Mini Pro 12K Only needs and receives 12V from it , so it will work well for powering the camera.

Q: 7. Can I use my Switronix V-Mount batteries on this?

A: We have been reassured repeatedly that all V-mount and gold mount batteries have the same standards as to battery charging and chargers. However, proprietary features may or may not function such as with the display of power remaining. Also note: while highly unlikely there is to be a problem, warranties may not be honored. Proceed with that knowledge.

Q: 8. Is the 95Wh battery (model number PD95S) sufficient to power the Aputure C120D II light?

A: This battery does not have enough amps to support The Aputure C120D II light. Instead we recommend the IndiPRO Tools Micro-Series V-Mount Li-Ion Battery (98Wh) BH #INVMP98S • MFR #VMP98S

Q: 9. Will this quad battery charger properly charge my RED Brick V-Mount Batteries?

A: Currently our manufacturer if doing testing with RED batteries on this charger. As for now we don't believe that this quad charger will properly charge RED batteries. We will inform you once we find out the test results.

Q: 10. Would Core SWX HyperCore 150 Gold Mount Battery be able to be charged with this unit?

A: Yes, the IndiPRO Tools Quad Pro Battery Charger (Gold Mount) will charge the Core SWX Hypercore NEO 150 Mini 147Wh Lithium-Ion Battery (Gold Mount), BH #CONEO150AG.