Genelec 8020D Studio Monitor Producer Finish

Genelec 8020d Studio Monitor Producer Finish

Product Code: eq48968
Availability: In Stock

$1,437.00 $1,796.25

Qty

10 reviews Write a review

Description
Reviews (10)

Styled in what the manufacturer has dubbed a "Producer Finish", and utilizing Class-D amplification, the Genelec 8020D Studio Monitor Producer Finishprovides accurate reproduction of the source material in a compact form factor. Its MDE die-cast aluminum rounded shape minimizes frequency and reflection distortions caused by edge diffraction. The 19mm metal dome tweeter is surrounded by Genelec's Directivity Controlled Waveguide, which helps to create an even response when listening both on and off axis.

The 8020D is built with Intelligent Signal Sensing (ISS) technology, which automatically activates the speaker when an audio signal is detected and puts it in standby mode when no signal is present, reducing its energy consumption to less than 0.5W. The 8020D features a 50W high-frequency amplifier for its ¾" tweeter, and a 50W low-frequency amplifier for its 4" woofer. The bass response is expanded by a rear-facing reflex port, and a separately available Genelec subwoofer can be used to monitor a wider array of frequencies.

4" Woofer, ¾" Tweeter 50W Bass Amplifier 50W Treble Amplifier Auto-Switching to Standby Saves Power Class-D Amplification MDE Cabinet Reduces Distortions Wide On- and Off-Axis Response Die-Cast Aluminum Enclosure Iso-Pod Table Stand Reduces Vibration

Key Specs
Monitor Type & Configuration	Active 2-Way
Total Power Output	100 W
Tweeter	1x 0.75" / 19.1 mm Metal Dome
Woofer	1x 4" / 10.2 cm Cone
Audio I/O	1x XLR 3-Pin Balanced Input (10 Kilohms)
Digital Audio I/O	No
Network I/O	No
Wireless	No
Parameters
Number of Included Monitors	Single Monitor
Enclosure	Bass-Reflex/Ported, Shielded
Total Power Output	100 W
Drivers
Tweeter	1x 0.75" / 19.1 mm Metal Dome
Woofer	1x 4" / 10.2 cm Cone
Amplifiers	HF: 50 W LF: 50 W
Performance
Frequency Response	62 Hz to 20 kHz ± 2.5 dB
Maximum Sound Pressure Level (SPL)	107 dB
Total Harmonic Distortion (THD)	<0.05%
Maximum Input Level	+24 dBu
Analog Input Sensitivity/Gain	+36 to -6 dBu (Continuously Variable)
Protections and Limiting	Driver Protection
Signal Processing
EQ	1x LF Shelf: -4 to 0 dB at 65 Hz 1x Low-Mid Notch/Peak: -4 to 0 dB at 200 Hz 1x HF Tilt: -2 to 0 dB at 15 kHz
Crossover Frequency	3 kHz
Connectivity
Audio I/O	1x XLR 3-Pin Balanced Input (10 Kilohms)
Digital Audio I/O	No
Network I/O	No
USB	No
Wireless	No
Power
AC Input Power	100 to 240 VAC, 50/60 Hz
Power Consumption	0.5 W (Standby) 3 W (Idle) 60 W (Maximum)
Physical
Color	Producer Gray
Monitor Orientation	Vertical
Dimensions (W x H x D)	6 x 9.5 x 5.6" / 151 x 242 x 142 mm
Weight	7.0 lb / 3.2 kg
Packaging Info
Package Weight	8.77 lb
Box Dimensions (LxWxH)	14.95 x 7.95 x 7.75"

Attached Iso-Pod table stand insulates the speaker from vibration and enables you to tilt its position upward or downward

Well-suited for near-field studio monitoring, control rooms, editing suites, surround sound applications, and multimedia entertainment systems

Rear-facing treble-tilt, bass roll-off, and desktop cut controls enable you to optimize the speaker to its environment

Threaded holes for wall or ceiling brackets

Active crossover filter

Driver unit protection circuitry

Woofer and tweeter magnetically shielded

Related Questions and Answers

Q: 1. Can the ISS be disabled? I see that there's a DIP switch for "ISS" on the back, so I assume that's for enabling/disabling ISS, but I'd like confirmation. ISS is not a feature I need or want. Thanks!

A: An ‘ISS Disable’ switch is located on each product’s back plate next to the other room response controls. First, when the mains power switch of the loudspeaker is set to “ON”, the ISS™ auto-start function (low-power sleep state on/off) of the loudspeaker is active. If this function is not desired, the ISS™ function can be disabled by setting the “ISS Disable” switch on the back panel to “ON” position. In this mode, the monitor is only powered on and off using the mains power switch. I hope this answers your question. Thanks.

Q: 2. Can I connect two of these speakers to a Scarlett Solo Preamp?

A: Yes, a pair of Genelec 8020D Studio Monitors can be used alongside and receive signal from a Focusrite Scarlett Solo 2x2 USB Audio Interface with the proper cabling. The Hosa Technology Balanced 1/4" TRS Male to 3-Pin XLR Male Audio Cable (BH #HOHSX005) is an example of the type of cable required to feed each speaker: https://bhpho.to/3R26bkP

Q: 3. Will these do OK at a distance of 3 to 4 meters from the speakers? Want to use it in a medium size bedroom.

A: Thanks. That page doesn’t speak about the distance between speakers and listener — just between speakers and walls, and angles among all the three. For this price the info should be more accurate: at what distance from the speakers does the quality fall off? There are reviewers who say they attach these speakers to TVs in their living rooms. Are they in such tiny rooms that their TV is 2 meters away from them? I doubt it. This is the info I need: would 4 meters be too much for these speakers costing thousands? 5 meters? What’s the number?

Q: 4. Do I get a pair if i make this purchase?

A: You have to order 2 to get a pair.

Q: 5. Are these monitors shielded?

A: No, the Genelec 8030C 5" 2-Way 100W Active Studio Monitors are not shielded. The Genelec models that have an "M" at the end of the manufacturer's item code (MFR#) are magnetically shielded.

Q: 6. Volume ntrol? Seems there is no knob on speaker..... how can you control volume? If I need external control, who makes the best?

A: There is not a volume control. although there is an input sensitivity control. The best way to control volume is by using a Mackie Big Knob: https://www.bhphotovideo.com/c/product/1313074-REG/mackie_big_knob_passive_studio.html

Q: 7. What is the differnce between the 8030C and the G Three?

A: Internally, the Genelec 8030C 5" 2-Way 100W Active Studio Monitor (Single, Raw) and the Genelec G Three are identical. The two models differ in their input connector types and rear controls: - 8030C only has an XLR input, while the G Three has RCA and XLR inputs - 8030C uses a trim pot to adjust volume, while the G Three only uses dip switches - Bass and treble EQ controls vary slightly between the two - G Three has a dip switch to turn off the LED light on the front, while the 8030C does not

Q: 8. $2250.00, is that the price of the pair or a single?

A: That is the price of one single 8331 SAM studio monitor. Please discuss pricing with your B&H sales person. Thank you.

Q: 9. Which do you recommend 8240APM or 8040BPM? ( I'm not mixing engineer. It's for my own project from composing to mastering by myself.?

A: the genelec 8040b i bought a pair and it was the best decision of my whole life the sound is flat but is the real sound obviously you need to start to fix your room with auralex and accoustic things

Q: 10. Will this stand work with a Genelec G One Bookshelf Speaker (G1BM)?

A: Yes, the Genelec L-Shape Table Stand for 8010 Studio Monitor is also compatible for use with the Genelec G One 2-Way Powered Bookshelf Speaker.

Mark	29/09/2024
[Active 2-Way] Purchased a pair of 8020D to sit atop my digital piano / keyboard for practice with virtual piano from the computer. The design, shape and integrated stand give it a smaller feel than its actual size. I wanted something that didn't look large, imposing, or boxy. At first I tried the smaller 8010s, but they are so diminutive that it felt a bit wrong having such small monitors. Also for playing loud the 8010s are at the top of their ability. These 8020D are a bit larger than the 8010 but still small enough for my needs. The 3inch driver is twice the size (area) of the 8010, its twice as powerful, and the bass response is significantly better. Fantastic sound. Connected to my audio interface by balanced XLR. 8020D manual explicitly states you can connect to unbalanced line out by using the appropriate cable, and there is an input gain adjustment to accommodate different line levels. Dip switches allow tuning base to work with the room and desktop acoustics, and both are useful in my application. I apply a little eq in my DAW to flatten out for room resonance (which is easy to tune by ear as you play up and down the piano). There are other speakers that have their own digital processing to tune themselves to your room acoustics. But for playing piano live I didn't want that feature, because it adds more latency. Good solo piano sound is hard because lumps in the frequency response make certain notes stand out and distract, there aren't other instruments in the mix to hide flaws, and poor sound can put one off playing. Headphones are great for practice too, but the experience of playing out loud is different. Its worth spending on the monitors. These are great. 5

Bo	27/09/2024
[<0.05%] I have 2 pairs now, they are great products, designed for the pro, the good thing about Genelec is the used market value are very high, so it is also a good investment 5

Jayce	26/09/2024
[3 kHz] You must get these speakers 5

Anousha	04/09/2024
[<0.05%] all genelecs that I've worked with have been amazing. great sound quality and precision and inspiring to work with. the only downside is the price which is worth it. 5

Bo	11/07/2024
[3 kHz] this is like you buy it and last for about 25 years, and the used market value are still giving you back the difference, if you hesitated this is a to go 5

David	08/07/2024
[Vertical] I have several kinds of genelecs ((3) 8030B with a 7050 sub) and have used these products for over 20 years. My studio changed from 5.1 to 7.1. I had 8020Cs as my rear speakers. I added these 8020D's. There are slight differences, like the volume is on the back and needs a Greenie to adjust. A bit more power, but for the most part, hook them up, tweak the room and go. 5

John	03/05/2024
[8.77 lb] Supurb near field experience speakers. I am using these on my desk tied into a BlueSound Node and subscribed to Tidal. Can't say enough good things about these. Even a low volume the bass is clear. No need for a sub unless you re really cranking the volume and have the room for these. 5

Marciano	18/04/2024
[Single Monitor] Note: For my 6010A cables plug directly into the speaker versus routing them through the hole in the base. 5

Robert	18/04/2024
[<0.05%] I bought these for my small home office. The headline is that these speakers sound close to perfect. Genelec is one of the few companies that provides accurate measurements of their speakers. These measurements have been validated from third parties. The 8030c model measures almost perfectly flat from about 50 Hz to 20 kHz. Horizontal dispersion is also near perfect with smooth downward sloping response. This means that reflected sound will not introduce tonal imbalance if you're listening non near field. It also means that you can equalize these speakers to whatever response you prefer. There are a few minor downsides. First, low bass has significant distortion at high volumes. This is just physics: volume will always be limited by enclosure size and driver diameter. If you use a subwoofer like I do (crossed with 24db slope at 80Hz) and use them in a relatively small room this issue goes away. Second, vertical dispersion is not as good as horizontal. You need for the tweeter to point to ear level at the listening location. Luckily the bottom mount makes this easy. If you want better vertical dispersion you should consider the more expensive coaxial models like the 8331. For my case this doesn't matter. If you want to research these further just google them. A popular science-based audio review site has these speakers #1 among around 100 tested, if you use them with a subwoofer. They compute a suite of measurements and run these through a preference model developed at Harmon that takes this data and predicts listener preference in a blind speaker test. The model explains 86% of listener preference variance. Anyway, these are some of the best speakers around and I highly recommend them. 5

Phillip	30/11/-0001
[3 kHz] I have been using Genelec 8010s for 4 years as computer monitors but recent heavier listening overloaded the bass so I splurged on a set of 8030Cs. OMG, a new spring has arrived! A whole complex of midrange, bass, attack, separation has appeared. I never realized what was missing. I am overwhelmed. God, Genelec! 5