Tannoy Vsx 10Bp 10" Compact Band-Pass Subwoofer Black

Tannoy Vsx 10bp 10" Compact Band-pass Subwoofer Black

Product Code: eq48992
Availability: In Stock

$2,217.00 $3,281.16

Qty

10 reviews Write a review

Description
Reviews (10)

The black Tannoy VSX 10BP is a compact band-pass passive subwoofer well suited for a variety of sound reinforcement applications including fixed, portable, and touring audio systems. The subwoofer requires 800W (peak) to power the 10" low-frequency driver, which provides a frequency response of 42 to 110 Hz with a peak SPL of 122 dB. The dual-ported enclosure ensures a fast and accurate transient response for copious quantities of tight low-end output with low distortion.

The VSX 10BP can easily be deployed in a multitude of configurations thanks to the eight integrated M10 rigging points and the blanking plate for the optional VTH pole mount. The Integrip handles are ergonomically integrated in the rear of the cabinet to provide ease in transport. The internally braced cabinet is covered with hard-wearing semi-matt black paint, while the rugged powder coated perforated steel mesh grille is backed with reticulated foam. The rear panel provides two Neutrik speakON NL4 and barrier strip connectors for input and pass-through to additional subwoofers.

For Live Stage, Theater, DJ Setups 10" Woofer 42 to 110 Hz Frequency Response Dual-Ported, Band-Pass System 200W / 800W (Cont./Peak) Power Handling 122 dB Peak SPL 8-Ohm Impedance 15mm Enclosure with Semi-Matt Paint Perforated Steel Grille with Foam Lining

Performance
System Type	Subwoofer, band-pass
Frequency Response	42 to 110 Hz (-3 dB) 36 to 130 Hz (-10 dB)
System Sensitivity	System Sensitivity (1 W @ 1 m): 93 dB (1 W = 2.83 V for 8 Ohms)
Power Handling	Average: 200 W Program: 400 W Peak (10 ms): 800 W
Recommended Amplifier Power	400 W @ 8 Ohms
SPL	Average: 116 dB Peak: 122 dB
Nominal Impedance	8 Ohms
Driver	Bass Driver: 10" / 254 mm
Crossover	80 to 110 Hz, 24 dB/octave Recommended high-pass filter 40 Hz, 24 dB/octave
Distortion	10% Full Power (28.3 V) 2nd Harmonic 50 Hz: 2.24%, 100 Hz: 0.17% 3rd Harmonic 50 Hz: 1.95%, 100 Hz: 0.47% 10% Full Power (28.3 V) 2nd Harmonic 50 Hz: 0.67%, 100 Hz: 0.42% 3rd Harmonic 50 Hz: 0.57%, 100 Hz: 0.49%
Construction
Enclosure	61 liters, 0.6" / 15 mm birch plywood, internally braced
Connectors	2 x speakON NL4MP and barrier strip
Flypoints	8 x M10 flying inserts (landscape mounting, portrait only if ground stacked)
Carrying / Transport Options	1 x Integrip carrying handle
Dimensions	11.8 x 18.1 x 23.2" / 300 x 460 x 590 mm
Weight	40.8 lb / 18.5 kg

Compact band-pass subwoofer for portable and installation applications
Power handling of 200W continuous, 800W peak
10" bass driver for extended low-frequency system response to below 40 Hz (-10 dB)
Low distortion, dual-port design for maximum sound pressure levels
Ideal for background music playback in clubs, bars, theatres, and AV applications
Internally braced plywood enclosure
Finished with a hard-wearing semi-matt black paint finish
Blanking plate for optional VTH pole mount
Integral M10 rigging points for ease of installation
Integrip handle ergonomically integrated into back of cabinet
Neutrik speakON NL4 and barrier strip connectors for input and link output

Related Questions and Answers

Q: 1. Will this work with a soundbar? Looking to replace the subwoofer for my Soundblaster Katana X

A: If your soundbar uses a standard RCA style LFE connection this will work.

Q: 2. Yamaha NS-SW100 - what are the dimensions?

A: The Yamaha NS-SW100 10" 100W Subwoofer (Black) BH #YANSSW100BL is 13.8 x 13.9 x 16.1".

Q: 3. Will this work with the Yamaha A-S501 amp?

A: Yes the Yamaha A-S501 amplifier has a subwoofer output for direct compatibility with the Yamaha NS-SW100 subwoofer.

Q: 4. Is yamaha ns-sw100w subwoofer compatible with sony receiver str-dh790 receiver consideratingf impedance thrshold aspect?

A: Yes, the Yamaha NS-SW100 10" 100W Subwoofer (Black), B&H # YANSSW100BL, would be compatible with the Sony STR-DH790 7.2-Channel A/V Receiver (B&H # SOSTRDH790) as long as it is not turned up to maximum volume. This receiver has a considerably higher power output than what this subwoofer is designed to handle.

Q: 5. What cables does this come with?

A: The Yamaha NS-SW100 comes with a power cable attached, to be able to connect it to a power strip or wall plugin power.

Q: 6. Will this work with my Pioneer component audio amplifier ? In case it matters, I also have a Marantz media player. Thanks, Roger

A: As other said, Yes. It should work with any RCA Preamp connection.

Q: 7. Does this product sell as a pair of speakers or singularly?

A: They are priced for each single speaker and sold as single units.

Q: 8. what is the filter slope?

A: Here are the specifications provided for the RF Venue BPF470T560 RF Band-Pass Filter (470 to 560 MHz): Insertion Loss Max: 3.5 dB Ripple in-band Max: 1.5 dB Voltage Standing Wave Ratio: 1.5 Rejection: 40dB @ DC-440 MHz 20dB @ 440-449 MHz 20dB @ 582-592 MHz 40dB @ 592-1000 MHz Power: 2W Temperature: -22 to 158° F

Q: 9. can this subwoofer be used with the yamaha stage pas 600i?

A: No it cannot be used with Yamaha PA equipment.

Q: 10. Hello, does the sub works with 240 volts?

A: The Yamaha NS-SW100 10" 100W Subwoofer works in 120 VAC, 60 Hz only.

Robert	22/09/2024
[400 W @ 8 Ohms] This is a perfect match for my Neumann TLM-103 or any mic that does not have a high pass roll off, it’s clean and noise free 5

Jude	01/09/2024
[400 W @ 8 Ohms] Easy to install and works great 5

John	08/08/2024
[8 Ohms] I love it, I did a lot of research and it's one of the best ones you can buy for 3 times the price. 5

William	05/08/2024
[8 Ohms] Not just home theatre but audio files, CD, radio. This is an all-around win at the price. 5

Mark	02/08/2024
[8 Ohms] Pair this with their inexpensive but highly spec'd NS 6490 speakers for a complete set up. Sub is simple to install and operate. 5

Kevin	07/07/2024
[400 W @ 8 Ohms] If you know Tannoy - you know how good these sound. Powering them with a Sonos AMP and they look and work great. 5

Michael	25/06/2024
[400 W @ 8 Ohms] My original Yamaha subwoofer that I bought with the system went out on me after 10 years. This replacement is excellent! Rich smooth bass had a very reasonable price. Fast shipping and it was packed very well! I recommend this subwoofer if you're looking for great base at a great price! 5

Craig	24/05/2024
[8 Ohms] I paid 200 for this recently. At 150 this would be a no brainer if looking for bedroom sub as I was. 1 rca plug and play. No frills (no standby; just an off/on button). Only volume control. The servo does the rest internally to match with your setup. Only 50W but enough for a bedroom. It does the job and has good musicality. Great for rap music. 5

Dana	28/04/2024
[400 W @ 8 Ohms] Strong, deep, bass with no distortion and no flutter. Very natural sounding. Not disappointed at all! 5

skip	06/04/2024
[8 Ohms] We installed this in a clients home theater and they love it. You do not need a giant sub in a home theater system (usually) and this is great to place any where and deliver more than enough punch to fill out the bottom of any movie sound track. 5