The 0.9" diameter Rycote Baseball Windscreen Windjammer Combo Kit 0.9" Holefrom Rycote Baseball Windscreen Windjammer Combo Kit 0.9" Holeincludes a Baseball felt-covered windscreen and a Baseball windjammer. The kit is designed to fit over a shotgun or similarly shaped microphone to greatly reduce unwanted noise swooshes during fast swings and other rapid boompole movements. It is lightweight and offers increased performance over conventional foam windscreens.

The Baseball is built with open-cell foam and covered in a felt material. It can be used for fast/deep booming and plosive reduction. Additionally, it helps protect your mic.

In addition, the Baseball windjammer is made from synthetic fur especially sourced and constructed to provide maximum wind protection and audio transparency. It is designed to absorb the impact of the wind, so it doesn't reach your microphone. The performance of the Baseball Windscreen with the Windjammer fitted is -40 dB wind-noise attenuation across the frequency spectrum.

Baseball Felt-Covered Windscreen    Baseball Windjammer    Increased Performance over Foam    Up to -40 dB of Wind-Noise Attenuation    Suitable for Outdoor Use    Low Coloration of Sound    Fast On/Off Installation    Reduces Swooshes from Boompole Movement    Helps Protect the Microphone

Sennheiser MKH 40, MKH 50

For mics with a 0.9" diameter

Related Questions and Answers

Q: 1. Does it will work with Oktava MK 012?

A: The Rycote 055201 Shotgun Mic Foam and Windjammer Combo is intended for use with microphones that are 19 to 22mm in diameter, but the diameter of the Oktava MK 012 is 23mm. As a better option, Rycote recommends the Rycote 021801 BBG Windjammer (B&H # RYBBGWJ) or the Rycote 033012Standard Hole Classic Softie Wind-Screen (B&H # RYS5M).

Q: 2. Is the Diameter Hole of the Rycote Baseball 19/20 0.7" or 0.8"?

A: The Rycote Baseball 19/20 has an adjustable opening with flexible tabs that will fit microphones that have a diameter of 19 to 20mm. It is better to use the metric measurements which are much more accurate than the rounded off imperial measurements as 19mm = 0.75" and 20mm = 0.79".

Q: 3. would this be a good choice for using the sennheiser mkh8050 or neumann km 185 outdoors?

A: Yes, this windshield would be a good choice for this application. Please note that it is not designed to be fitted over the mic itself, but rather fitted over a Cyclone Windjammer such as BH #RYCWSKS.

Q: 4. Will this work with a Shure SM-58?

A: Hi: thanks for your question! I'm afraid not: the head of the SM-58 is much too bulbous. Please see the following webpage for a list of compatible mics: a href= http://rycote.com/microphone-windshield-shock-mount/baseball/. target= _blank http://rycote.com/microphone-windshield-shock-mount/baseball/./a MF

Q: 5. Will you be getting the 22mm size in stock, with the green seal?

A: After speaking to the manufacturer, we should have the 22mm (green seal) version available for pre-order within the next month or so; cat# 039705.

Q: 6. will this work with the mkh 8040 and mkh 8050 from sennheiser? and what shock mount should i use with this? difference to cages?

A: Yes, the Rycote Baseball Felt-Covered Windscreen (Black, 19/20mm, Single) will work with the Sennheiser MKH 8040 and MKH 8050 models. You will be able to use any shockmount that is compatible with these microphones as well.

Q: 7. Which rycote fur windjammer will fit the Sennheiser MZW 60-1 Blimp Windscreen?

A: The Rycote and Sennheiser blimps are very similar, yet they are not identical. Part of the issue is where the pistol grips line up on these blimps, and the opening on the fur windjammers factors in the position of each pistol grip. There are no guarantees Rycote and Sennheiser are interchangeable, but a Rycote equivalent to the MZW 60-1 would be the Windjammer #4 (B&H#RYWJ4).

Q: 8. Will this fit the oktava m 012 mic or is it better to go a size down since it is 23mm?

A: We cannot confirm compatibility for any of the baseball windscreen and windjammer combo kits with your microphone. Oktava does list the diameter of the MK 012 and MC 012 models as 23mm (0.9") and length as 128mm (5"). The Rycote 24/25mm will be too loose and the 21/22mm may not be able to stretch because of the plastic collar on the foam. This item is intended for use with a shotgun microphone while your mic is more of small diaphragm condenser style. If you do want the foam/fur combination, perhaps something like the Auray WSS-2012 Professional Windshield for Shotgun Microphones - 12cm (B&H # AUWSS2012), Movo Photo WS-G120 Furry Rigid Windscreen for Microphones up to 4.7" Long and 18 to 23mm in Diameter (B&H # MOWSG120) or Movo Photo WS-G100 Furry Rigid Windscreen for Microphones up to 3.9" Long and 18 to 23mm in Diameter (B&H # MOWSG100) may be a better option. There are options for the same windscreen in shorter lengths if you want to cover a smaller portion of the mic and you will see a drop-down menu for the available options on the item page.

Q: 9. what windjammer I need to the ae kit?

A: They no longer make a blimp or windjammer for the Rycote Stereo Windshield WS AE ORTF Kit.

Q: 10. Would this work over the Sennheiser MZW 64-PRO Foam Windscreen? If not, is there another slip over Windjammer that would?

A: The Rycote Special 90 Mini Windjammer (BH # RYMWS90) is too small to fit the Sennheiser MZW 64-PRO Foam Windscreen (Black), BH # SEMZW64P. The WindTech Mic-Muff Microphone Windshield MM-8 (BH # WIMM8) is recommended.