Mount your Canon EOS C200 camera on a shoulder rig, tripod, or other rig and add accessories with this Canon C200 Shoulder Mount System | SHAPE Accessoriesfrom SHAPE. The system features a baseplate with 15mm LWS rod clamps, a camera plate, and two aluminum 15mm rods that measure 12" in length.

The baseplate features three 1/4"-20 screws to securely mount your camera, as well as multiple 1/4"-20 and 3/8"-16 mounting thread options. The baseplate features 1/4"-20 and 3/8"-16 tripod mounting threads on the bottom. The standard 15mm LWS rod clamps secure the included 15mm rods with locking levers, allowing you to add accessories such as a follow focus, matte box, and more.

Attaches underneath the camera via 1/4"-20 screws, and the camera adapter plate features 3/8"-16 and 1/4"-20 threads

Mount on a tripod or rig with 3/8"-16 and 1/4"-20 threads

The 15mm rod clamps on the baseplate secure two 12" long 15mm aluminum rods

The 15mm LWS design is designed to respect the C200 optical center

Four rubber pads at the top of the base protect and securely hold your C200 camera

Allen wrench attaches to the bottom of the baseplate via a magnet

Related Questions and Answers

Q: 1. Can I mount a Sony VCB plate on the bottom of this for use with tripods?

A: Hello Sean,Thank your for contacting us! If you mean a VCT plate, these camera supports are not designed for it really. We do have a perfect solution for the Canon C200 camera if you plan on using a VCT plate. We invite you to refer to our C200 section on our website and look for our C200 BUNDLE RIG.a href= https://www.shapewlb.com/en/canon-c200-camera-supports.aspx target= _blank https://www.shapewlb.com/en/canon-c200-camera-supports.aspx/aThis solution allows you to use a VCT plate without a problem. We hope this helps and we thank you for your interest in our products. The SHAPE team.

Q: 2. Is this plate identical to the bottom plate that is included in the full cage by Shape for the c200?

A: Hi Jason, yes this is the same plate that we use for the C200 cage.

Q: 3. Do you need a counterbalance if you're not using a battery brick?

A: That will depend on how you set up the C200 and if that set up makes the rig front heavy. Here is a 1.8 pound counter balance from Lanparte that attaches through 15mm rods. https://bhpho.to/36XEv9W

Q: 4. Would this work with a Sony fs7 m2?

A: Hello Tania,Thank you for contacting us! Unfortunately, this camera support was specifically designed for the C300 Mark i. We cannot guarantee it will fit for the Sony FS7M2.We do have a line of products for the Sony camera that will give you several interesting solutions. We invite you to visit our Sony FS7Mii page on our website.a href= https://www.shapewlb.com/en/sony-pxw-fs7m2-camera-supports.aspx target= _blank https://www.shapewlb.com/en/sony-pxw-fs7m2-camera-supports.aspx/aWe hope this helps and we thank you for your interest in our products.The SHAPE team

Q: 5. What do I need to use this either with a C100 mark II or a 5d mark IV?

A: Hello JimThank you for your question! For the C100 Mark ii, you do not need anything else than this rig. The main baseplate of this shoulder mount was specifically designed for the Canon C series cameras (C100-C300-C500). So it should fit fine. As for the 5D Mark IV, if the optical center is not an issue, it should be ok, if it is, you can still use it but adding accessories like a mattebox might be a bit tricky.For more detailed info, please call us at 1.888.968.9810We hope this answers your questions and we thank you for your interest in our products.The SHAPE team

Q: 6. Can I relocate the remote handle to the handles on the shoulder mount?

A: Hello! Thank you for your question! You can indeed remove the rubber handle on the unit and insert the C300 bracket designed to attach the remote handle of the camera.We hope this helps and we thank you for your interest in our products.The SHAPE team

Q: 7. This includes 3 screws. Right? They are seen in photo, but are not listed iin specifications.

A: Hi, thank you for your question. You are right! There is 3 screws included for fixed the camera. Thanks again!

Q: 8. Will the rig work for the C200 for run and gun work?

A: I use it with a C200 with no problems.

Q: 9. I'm looking for a rig that has a quick and easy transition during events from handheld mode to tripod. Would you recommend this?

A: You can screw a plate to the bottom of the baseplate. So, if you are willing to leave the baseplate on and rails then it would be fast.

Q: 10. Do you need to buy an extension cable for the monitor?

A: no