Dynacord C3600Fdi Fir-Drive Power Amplifier 3600W

Dynacord C3600fdi Fir-drive Power Amplifier 3600w

Product Code: eq49461
Availability: In Stock

$5,577.00 $7,194.33

Qty

12 reviews Write a review

Description
Reviews (12)

The Dynacord C3600FDi C-Series FIR-Drive Power Amplifier is a 1800W audio amplifier designed for permanent installation applications, to provide background or live music in venues including bars, houses of worship, restaurants, sports facilities, and performing arts centers. The C3600FDi is equipped with a robust power supply and a powerful linear amp design, well suited for the most demanding environments. The sophisticated protection circuitry ensures safe, reliable operation under all conditions. The amplifier is also suitable for direct drive applications with 70/100V speaker lines for a variety of flexible install scenarios.

The C3600FDi features Euroblock connectors for convenient wiring, remote power-on delay, and GPIOs to interface with third-party controls. An efficient standby power mode reduces running costs and power consumption by up to 90%, leading to a low cost of ownership. The amplifier utilizes high-quality components throughout for truly professional processing power and performance characteristics. The on-board DSP includes multi-band PEQs (parametric EQ), crossovers, limiters, and delay per channel. It also has true channel grouping control with extra DSP capabilities like PEQ, GEQ (graphic equalizer), and delay for each group. The Dynacord C3600FDi ships with a power cord, USB cable, and a variety of Euroblock & power remote connectors.

2 x 3000W at 2 Ohms 2 x 1700W at 4 Ohms 2 x 900W at 8 Ohms Euroblock Connectors Single, Dual Channel, and Bridged Modes Advanced DSP with FIR Drive Technology Low-Z and 70/100V Operation Powerful Control Software Advanced Protection Circuitry Includes Euroblock Connectors

Parameters
Load Impedance	2 Ohms 2.7 Ohms 4 Ohms 8 Ohms
Maximum Output Power	Single Channel 2 Ohms: 3200 W 2.7 Ohms: 2700 W 4 Ohms: 1800 W 8 Ohms: 950 W Dual Channel 2 Ohms: 3000 W 2.7 Ohms: 2500 W 4 Ohms: 1700 W 8 Ohms: 900 W High-Impedance 70 V: 2 x 1250 W High-Impedance 100 V: 2 x 2500 W Bridged 4 Ohms: 6000 W 8 Ohms: 3400 W
Impedance	High-Impedance Operation: 70 V, 100 V
Maximum RMS Voltage Swing	90.6 V
Voltage Gain	32.0 dB (ref 1 kHz)
IMD SMPTE	IMD-SMPTE, 60 Hz, 7 kHz: < 0.1%
DIM 30	< 0.05% (3.15 kHz, 15 kHz)
Maximum Input Level	+21 dBu
Crosstalk	< -80 dB (ref. 1 kHz, at 100 W / 4 Ohms)
Frequency Response	10 Hz to 21 kHz (±1 dB)
Input Impedance	20 kOhms
Signal-to-Noise Ratio (SNR)	> 109 dB (A-weighted)
Output Noise	< -68 dBu (A-weighted)
Total Harmonic Distortion	< 0.05% (at 1200 W / 4 Ohms MBW = 80 kHz, 1 kHz)
Topology	Class-H
Signal Processing	FIR filters Audio limiters Output delay per channel 31-band GEQ per channel PEQ per channel Load impedance
Protection	Audio limiters High temperature DC HF Back-EMF Peak current limiter Inrush current limiters Turn on delay
Cooling	Front-to-rear, 3-stage fans
Safety Class	I
Color	Black
Operating Temperature	40 to 105°F / 4 to 41°C
Power	Power Requirement: 120 VAC, 60 Hz Power Consumption: 850 W (1/8 maximum output power @ 4 Ohms) Mains Fuse: T30AH
Dimensions	3.5 x 19.0 x 18.2" / 88.9 x 482.6 x 462.3 mm
Weight	40.1 lb / 18.2 kg

Installation DSP amplifier, Euroblock connectors
Fully integrated professional speaker processing with FIR Drive technology
Professional acoustic performance and rock-solid reliability
Low-Z and 70/100V operation and power saving standby mode
Powerful and proven audio performance
Engineered for constant stability at 2 Ohms
Low- and high-impedance outputs and remote GPIO control
Highly efficient standby power mode reduces running costs and power consumption up to 90%
Sophisticated protection circuitry always protects the amplifiers and connected loudspeakers
High-performance bulletproof voltage handling
On-board DSP includes multi-band PEQs, crossovers, limiters and delay per channel; True channel grouping control with extra DSP capabilities including GEQ
Intuitive, powerful control software makes configuration and real-time control easy. Up to 16 amp channels can be controlled and monitored simultaneously
Advanced FIR drive to optimize loudspeaker settings, providing premium features into an installation form factor
Engineered in Germany

Related Questions and Answers

Q: 1. how many speakers can I connect per channel?

A: The QSC GX3 features 2 physical speaker outputs designed for optimal operation at 8 ohms. The unit is able to operate safely with a 4 ohm load as well which will give you a higher wattage output per channel. You are able to connect multiple speakers to each channel in parallel, but should be careful not to exceed the wattage and impedance ratings listed by the manufacturer.

Q: 2. Can I hook an equalizer to this Marantz stereo power amplifier?

A: Unfortunately newer Amplifiers (and Receiver Amplifiers) no longer offer the ability to connect a separate Equalizer like the older models. The current models no longer provide Input / Output ports for Equalizers.

Q: 3. Can this amp be used in a home theater setup?

A: It can, if your home is sufficiently large. The amp is designed for speakers up to 300W (most home theater speakers don't go above 100W, which would fill a decent sized living room with sound.) So the GX3 would work, but you also may find it overkill (and if your speakers are too small or rated at 16 Ohm, you may blow your speakers if you turn the amp volume up too high.)

Q: 4. Hi, for the top pole mount spec says "1 x M201.38" / 35 mm 3/8"-16 Female (Top)" Is it a cup or a thread, and what size??

A: The M20 thread on the QSC KS118 is a thread size that is commonly found on subwoofer poles like the On-Stage Subwoofer Pole with M20 Thread (Black) (B&H # ONSS7746).

Q: 5. is the input power for the Rolls RA235 220Volts or 110 Volts or it works on both 110V /220 V?Please adviseBest regards

A: The Rolls RA235 is compatible with 120 VAC 50/60 HZ only.

Q: 6. Is there an appropriate Road Case or Gator for this mixer?

A: While there don't appear to be any solutions made specifically for the Dynacord CMS 1600-3 Compact 16-Channel Mixer, a third party case such as BH #GAGMIX20X30 Gator G-MIX-20x30 Rolling ATA Mixer Case with Lockable Recessed Latches and Pull-out Handle should work as a suitable case option for this mixer.

Q: 7. Does the Marantz stereo power amplifier has a midrange sound control?

A: This power amp does not have tone control. A preamp would be paired with this amp, and provide for tone control.

Q: 8. When used in the bridged mode for mono, will the headphone output be mono as well?

A: When cue monitoring with headphones on the Samson Servo 120a, you will receive a stereo signal in the headphones.

Q: 9. CAN i connect 4 speakers 8Ohm 150w rms to each channel in parallel mode ?if not which is the best way to connect 4 speakers/channel, not to overload the machine or burn the speakers?

A: Connecting four 8 ohm speakers to a channel will present a 2 ohm load which the GXD 8 is not designed to handle. A minimum of 4 ohms per channel for proper operation is recommended by the manufacturer.

Q: 10. I wish to use this amp with (4) speakers inside a small (1,500 sqft) fun center lobby with 10ft. ceilings. Would someone be able to suggest a good speaker match? Thanx.

A: Thank you for your question. Please give us a call at 800.606.6969 so that we can better assist you in getting the right speakers for your needs.

Robert	18/09/2024
[20 kOhms] I have Bose 901 speakers which require an active equalizer so I need a preamp power amp combo. I have a Marantz 5 channel receiver to drive the center and other channels and this works great with the receiver to drive the 901s as the front speakers. B&H shipped this unit quickly and there were no problems. 5

Philip B	14/09/2024
[90.6 V] Worked great so far. Sound is more analog than expected 5

Alvin	07/08/2024
[+21 dBu] I had this with my NR1710 and its Fantastic using it for Bi-amp, I wish they put additional volume control on this unit, 5

Edward	11/07/2024
[Class-H] It’s been working perfectly for the last two years. I do wish you had a little more power 5

anyonymous	05/06/2024
[I] Great addition to my system, goes out to a pair of Klipsch Heresy speakers.... sounds amazing and really pushes my speakers... much better sound than anything Bluetooth speakers can provide... Old school wired sound is still the best for music... 5

Julio B.	23/05/2024
[Class-H] Great product for a home theater system. Seamless integration with A/V separates. Allows upgrade of processor while maintaining a strong audio experience. Couldn't be happier with the styling and performance. There are currently two of these units driving a 5.4.2 system while also pushing audio in a separate room. 5

CroRam711	15/05/2024
[Class-H] Perfect, easy integration with my SR6011 and definitely opened up my Vienna Acoustics Mozarts, which already sounded very nice but soundstage, detail and bass noticeably came alive after adding the MM7025. It’s a quality piece that performs as advertised. I’m a fan and my only hesitation is wondering if I should have gone with the 7055 to let the rest of my main surround setup have 5 channels of clean power goodness. But I think this definitely covers the most critical ground and gives the 6011 some breathing room to handle center, surround, atmos and outdoor speaker duty. Amp and system runs cool with these speakers at 85 db+ listening (fan hasn’t kicked on that I’ve noticed) but will add cooling as needed or if my new Reserve R600s prove to be a bit less efficient. All in all, highly recommended. 5

Mark	02/05/2024
[Class-H] First of all B&H delivered this product very promptly, THANKS to B&H!! I originally wanted the MM 7055 power amp with 5 speaker channels. That model seemed to be on back order. Instead, I decided to give the MM 7025 a try. The MM 7025 delivers plenty of power to my two Def Tech Floor speakers, sounds absolutely amazing, and runs cool. I am very pleased so far, great product !! 5