Helping to produce overall cool tones, this 100mL bottle of Moersch Photochemie Finisher Blue 100mLfrom Moersch Photochemie Finisher Blue 100mLis a concentrated black & white paper developer additive. By adding this finisher to the developing bath, black tones will take on a decidedly colder, blue-black coloration. The strength of the effect can be varied by how much solution is added to the developer, however if more than 10mL is used per liter of developer, processing times should be increased.

B&W Paper Developer Additive    Produces Deep, Cold Blue-Black Tonality    Effect Varies Based on Amount Used

Related Questions and Answers

Q: 1. Can the silica be replaced?

A: The silica gel is not meant to be replaced. When its done buy another one.

Q: 2. Can we reuse the fixer? For up to how many rolls?

A: A general rule-of-thumb would require you to test your fixer working solution immediately after mixing to find its clearing time, then when it takes twice as long as the original test to clear the film, you may discard it. In practice, to test your working solution, you can take an unexposed piece of film (such as the film leader) and place a drop of fixer on the emulsion side of the film. Leave it for approximately 20-30 seconds. Then place the film into the fixer, ensuring it is covered. Time how long it takes for the clear spot to disappear (when you can no longer tell the spot you placed the drop of fixer from the rest of the completely clear film). This would be the fixer's clearing time. You would double this time amount to find the amount of time it takes to fix your film (i.e., if it took 2 minutes 10 seconds for the film to become completely clear and the dot to disappear, you would fix film for 4 minutes 20 seconds). You would test your fixer every time before using the fixer. When, during your test, it takes twice as long to fix your scrap film leader to clear as it did when you first mixed the working solution, it may be discarded and you may make a new working solution. (if you wish, you may wait until it takes triple the time your original test took to clear, but this would result in extremely long fixing times).

Q: 3. Can multiple packs be recharged at once, in a microwave or in an oven?

A: Yes you can recharge several packs at once but the time needed will increase depending on the number of packs. Recharging can only be done in a microwave, not an oven.

Q: 4. Does it require a bleach first or is this a direct toner?

A: This Moersch Photochemie MT2 Carbon Toner works if the paper is bleached first, especially if one wants to add toner to the white sections of a print. The toner will also work as a direct toner for a different effect.

Q: 5. Does the reflection filter come with the stand and shock mount as pictured? Or just the filter alone?

A: The kit offered is complete as shown: In the Box: Yeti USB Microphone (Blackout) USB Cable Stand Limited 2-Year Warranty Senal - SMH-500 Professional Studio Headphones Auray - RF-CPB-18 Reflection Filter (Plastic) Auray - TT-6110 Desktop Microphone Stand (Black)

Q: 6. What is the chemical make up of this product? Is it for color or b&w?

A: Moersch Photochemie Bleach Concentrate (100mL) contains potassium hexacyanoferrate and potassium bromide.

Q: 7. Can these be used to fix paper prints?

A: While it may be possible to use the same fixer for both film and paper, I do not recommend using the same working batch for both film and paper. If you do plan to use the same fixer for both film and paper prints, I would create one working batch to be used with your film, and a separate working batch to be used with prints.

Q: 8. What all comes in this package, is it just the microphone or is everything on the picture is included in the box???

A: The Yeti Studio Professional Recording System for vocals will include the microphone with stand, USB cable, Presonus Studio One Artist Blue Microphones Edition recording software, and iZotope Nectar Elements Vocal Production Software.

Q: 9. I'm a bit confused with the reviews & compatibility list - will this fit the standard D200 2.5" griphead?

A: No, The Avenger D050 T-Top is designed for 3.0"/80mm T-handles, they are not built for standard c-stands and are not compatible with the 16mm T-handle on the Avenger D200 2.5" Grip Head.

Q: 10. Is this good for singing with?

A: Yes it is