Godox Dp300Ii Flash Head Photography Lighting

Godox Dp300ii Flash Head Photography Lighting

Product Code: eq49635
Availability: In Stock

$435.00 $526.35

Qty

11 reviews Write a review

Description
Reviews (11)

The Godox DP300II Flash Head Photography Lightingfrom Godox DP300II Flash Head Photography Lightingis a full-featured 300Ws monolight with several professional and convenience features. The head has a color temperature of 5600K, a recycle time of 0.3-1.2 sec, and flash durations from 1/800 to an action-stopping 1/2000 sec. Power is variable from 1/16 to full power, while the DP300II's 150W modeling can be set to a percentage or proportional to the flash power to allow you to accurately preview your final shot. All of these functions can not only be made manually on the unit, but also wirelessly via the head's built-in Wireless X System receiver. Remote operation requires separate purchase of a transmitter. The XT16 and FT-16 remote controls provide wireless control of power, modeling light, and ready beep signal. The DP300II has a Bowens front accessory mount that makes it compatible not only with Godox light shapers, but with those made by the many manufacturers who use this mount.

With built-in Godox wireless X system, DPII-series studio flashes offer build quality, fine control on flash power, and stable flash output. Additionally, they fit a wide-range light shaping accessories in the market.

Recycle Time: 0.3-1.2 sec 1/2000 to 1/800 Flash Duration 300Ws Built-In 2.4 GHz Wireless X System 1/16 to 1/1 Power Variation in 40 Steps Bowens Front Accessory Mount 5600K Color Temperature 150W Modeling Light

Key Specs
Item Type	1x Monolight
Includes Flash Tube	Yes
Power Range	300 Ws
Power Control	4-Stop Range in 1/10-Stop Increments
Recycle Time	0.3 to 1.2 Sec
TTL Metering	No
Modeling Light	1x 150 W Tungsten Bulb Included
Wireless Remote Control Type	Radio/RF Receiver Built-In Optical Receiver Built-In
Power Source	AC Power (Cable Included)
Inputs/Outputs	1x Barrel / Coax Female Flash Sync Input 1x USB-A Female Flash Sync Input 1x IEC Female Power Input (100 to 120 VAC, 60 Hz)
Weight	5.7 lb / 2.59 kg
Light Fixture
Item Type	1x Monolight
Includes Flash Tube	Yes
Included Storage Case	No
Power Range	300 Ws
Power Control	4-Stop Range in 1/10-Stop Increments
Guide Number	190.3' / 58 m, ISO 100
Recycle Time	0.3 to 1.2 Sec
Color Temperature	5600K +/- 200K
Flash Ready Indicator	Audio & Visual
TTL Metering	No
Cooling System	No
Umbrella Mount	Yes
Front Accessory Mount	Bowens S
Replaceable Flash Tube	Yes (User Replaceable)
Modeling Light
Modeling Light	1x 150 W Tungsten Bulb Included
Control Modes	Free Set, Off, Proportional
On/Off Switch	Yes
Connectivity
Wireless	2.4 GHz Radio/RF
Wireless Remote Control Type	Radio/RF Receiver Built-In Optical Receiver Built-In
Mobile App Compatible	Yes, Adapter Required (Not Included): Android & iOS App Name: Godox Flash
Wireless Channels	32
Wireless Groups	16
Wireless Frequency	2.4 GHz
Flash Duration	1/2000 to 1/800 Sec
Power & I/O
Power Source	AC Power (Cable Included)
Inputs/Outputs	1x Barrel / Coax Female Flash Sync Input 1x USB-A Female Flash Sync Input 1x IEC Female Power Input (100 to 120 VAC, 60 Hz)
AC Input Power	100 to 120 VAC, 60 Hz
Included Adapter / Cable	1x USA Type-A/B to IEC Male Cable
Fuse	5 A
General
Display	No
Dimensions	16.5 x 8.5 x 5" / 42 x 21.5 x 12.5 cm (Fixture with Handle)
Weight	5.7 lb / 2.59 kg
Packaging Info
Package Weight	8.65 lb
Box Dimensions (LxWxH)	18.5 x 10.22 x 9"

Built-in wireless system to control flash power, On/Off, modeling lamp, and beep indicator (requires optional transmitter)

1/16-1/1 Flash power control

150W modeling lamp

Bowens front accessory mount

Anti preflash (for single preflash cameras)

Auto recovery of adjusted settings after restart

Related Questions and Answers

Q: 1. i have the photogenic ion. Am i able to use this for outdoor photos ? Or do i need a certain power pack ? Or does this need plugged into an outlet ? thanks

A: As long as you keep the modeling light off you can use a Photogenic ION.

Q: 2. What are the dimensions of this light?

A: Godox H2400P Flash Head has a dimension of 4.7 x 13. The braket attached is 5.3'' long.

Q: 3. can i control this flash along with an ad600?

A: Yes, the QT1200 IIIM can be set for the same channel but a different group in order to control it in conjunction with the Godox AD600 using the appropriate Godox X series transmitter.

Q: 4. Can I use this with my EZ Lock 28” deep parabolic softbox?

A: If your modifier works like an umbrella you can place this light inside.

Q: 5. All illustration photos show a reflector. The “In the box” side bar does not include a reflector. Does it come with the reflector shown?

A: I had the SuperStore check and this does include the reflector.

Q: 6. What is the height on the Light stands?

A: They are 7' toll

Q: 7. Does this plug into the wall? Or do I need a Godox power bank?

A: You need the Godox P2400 Power Pack BH #GOP2400 to power the H2400P Head.

Q: 8. I have the Godox XProC trigger already. Did I also need to purchase a receiver for this or is it built in?

A: An X series receiver is already built into this monolight, so your XPRO C transmitter can fire it.

Q: 9. What barndoors would fit this flash?

A: Please review the following item. Godox Barndoor Kit BH #GOBD04 • MFR #BD-04 https://bhpho.to/3HzUUVw

Q: 10. Every time I press Test on either the strobe or my godox trigger the power output goes to its lowest strength. How to I stop this ?

A: Please make sure that you wait more than three seconds between the time when you change the setting on your Godox QS600II Flash Head (B&H# GOQS600II) and the time you fire it or switch it off. That way the memory function should hold the setting. If you experience further problems then please contact us by phone, chat, or email and let us know how you are using it and what you are seeing on the display panel of the strobe.

Laura	23/09/2024
[1x Monolight] Wonderful light and so easy to set up 5

Justin	02/09/2024
[Yes] The product is great so far - the company is what is impressive.. The great counsel, advice and help before AND after the purchase.. Will continue to buy from B&H.. 5

Kamissa	02/09/2024
[0.3 to 1.2 Sec ] Lightweight, powerful, and consistent 5

Timothy	23/08/2024
[1x Monolight] Are these flash heads perfect, no they are not. If you are chasing perfection, you will probably never find it and if you are looking for perfection in a flash head under $200 then you will never be happy with them. I have had these in my studio for almost 3 years. I have had no major problems with them. The color and intensity fluctuates from time-to-time and maybe every thousand flashes or so it will misfire. But seriously they are under $200!! I have a rental studio and these guys get a TON of use. At this price point the build quality is fabulous. They have proven to be very durable (trust me, my customers can be hard on them). Other than expected maintenance (changing bulbs) these strobes have performed like rock stars. 5

Yvan	08/07/2024
[8.65 lb] Very good ! 5

Larry	25/05/2024
[1x Monolight] For the costs of these strobes with them being digital and adjustable from the trigger unit, you cannot go wrong with these. This has changed my whole way of setting up and shooting as once I measure my distances and get my basic aperture settings, the digital will hold good for maybe 75-80% of my shoots (if I setup the same) and reduce setup time. 5

Charles	01/05/2024
[5 A] Amazing product but its size and weight (9.5lb) demand that it is a studio strobe. The manual needs to be more detailed and more visual. Also, for its cost, it would have been great to have included a proper strobe speed ring for a Bowens-S mount. 5

Douglas	23/04/2024
[Yes] I’ve only had this kit for a short time, but so far, I’m very pleased with it. The lights are easy to use and powerful enough to meet the demands of most any studio. It’s definitely worth the price. 5

Andrea	17/04/2024
[Bowens S] The Godox QS600ll Flash head is just what I was looking for. It's got plenty of power, is quiet and efficient. I bought it because even though I had been getting great shots with my little SB800 flash inside of a 2x2 softbox, this allows me to have much more control over the final product. It feels sturdy and I love having a built in handle. Also having a protective cover for the bulbs is terrific. I had bought the triggers from godox prior to buying this lamp and love that it's compatible with my godox triggers. And the fact that the one trigger is internal on the lamp is great too. It's one less set of batteries to worry about. It's easy to remove the reflector for when I want to attach my large 3x4 foot softbox. 5