The 8x8 HDMI 2.0 Matrix Switcher with 4K2K Scalingfrom 8x8 HDMI 2.0 Matrix Switcher with 4K2K Scalingsupports video resolutions up to 3840 x 2160 at 60 Hz and 4096 x 2160 at 60 Hz with 4:4:4 YUV and HDR formats. It features multiple control interfaces including front-panel buttons, RS-232, Telnet, WebGUI, and IR remote.

This matrix switcher supports pass-through of audio formats including LPCM 2.0-7.1, Dolby Digital, DTS, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, and DTS-HD Master Audio. It is HDCP 2.2 compliant and supports EDID management.

Supports EDID management

Provides optional output 4K or 2K scaling

HDCP 2.2 compliant

Related Questions and Answers

Q: 1. Does this product have VRR support for consoles like Xbox Series or PS5 once that's an option?

A: No it does not.

Q: 2. Does the Kramer Kramer VS-62H support HDCP 2.2? This info in not in the datasheet nor manual.

A: We are afraid not. This only supports HDCP 1.4.

Q: 3. This lists a bracket as an accessory, is this fully mountable in a 19" equipment rack with the hardware included?

A: Yes, the MuxLab 4K60 HDMI 8 x 8 Matrix Switcher will be able to be mounted to an equipment rack with the included bracket.

Q: 4. Does it display signal loss or other message upon switching?

A: Could you be more specific in your question? What do you mean?

Q: 5. Could device be used as a way to move from camera while filming to another camera that is filming during a three shot interview while live recording ON THE FLY?

A: While this switcher can switch HDMI sources and will likely accept multiple camera signals, it is not an ideal solution for a live production as it is intended as an A/V switcher, for switching sources of devices, like Bluray players and game systems, when seamless transitions are not essential. In other words, this device like other A/V switchers will lose signal for a second or so between switches. A video production switcher like the Roland V-1HD (SKU: ROV1HD) or the Blackmagic ATEM Mini (BLSWATEMMINI), will allow seamless switching, as well as many other features advantageous to a live production. https://www.bhphotovideo.com/c/product/1198625-REG/roland_v_1hd_4_x_hdmi.html https://www.bhphotovideo.com/c/product/1507214-REG/blackmagic_design_swatemmini_atem_mini_switcher_control.html

Q: 6. Does this support 3D Blu Ray?

A: Yes the IOGEAR 2 x 2 DCI 4K HDMI Matrix Switcher supports 3D Blu-ray

Q: 7. Does it support display resolution of 3840 x 2160 @ 60 Hz per output port?

A: Yes it does. I have had this switch for about a year. It works well. Only issue is the fan is sort of noisy. Once it is out of warranty I plan to open it up and replace the fan with a quieter one.

Q: 8. Will this allow me to switch between two simple camcorders (Sony HDR-CX405) and send the signal to a monitor?

A: Yes, the Kopul HDMI 2.0 5 x 1 Switcher would allow you to connect up to five HDMI sources, and toggle between the connected sources. You could output this to an HDMI monitor.

Q: 9. how much time dose it take to switch ?

A: The time to switch from one source to another should be no more than .5 second.

Q: 10. Does this Kopul switch automatically to the active source?

A: The manufacturer does not explicitly define this (not even in the User Manual), but typically, active source gets preference and it works chronologically from input 1 to input 5.