12G-Sdi To Single-Mode Lc Fiber Transmitter

12g-sdi To Single-mode Lc Fiber Transmitter - Aja

Product Code: eq49868
Availability: In Stock

$2,967.00 $3,768.09

Qty

11 reviews Write a review

Description
Reviews (11)

FiDO-T-12G offers unmatched flexibility and cost efficiency for 12G/3G/HD/SD-SDI Fiber conversion, allowing for cable runs up to 10 km over standard single-mode fiber optic cable.
FiDO converters use a compact, low-profile enclosure that works well in tight spaces around and behind equipment racks, trucks and on camera.

General
Device Type	Video extender
Form Factor	External
Networking
Connectivity Technology	Wired
Data Link Protocol	12G-SDI
Data Transfer Rate	11.88 Gbps
Optical Wave Length	1260 / 1310 / 1360 nm
Max Transfer Distance	6.2 miles
Expansion / Connectivity
Interfaces	1 x network - LC single-mode female x 2 1 x 12G-SDI (input) - BNC female 1 x 12G-SDI (output) - BNC female
Power
Power Device	External power adapter
Voltage Required	DC 5 - 20 V
Power Consumption Operational	2 Watt
Dimensions & Weight
Width	4.6 in
Depth	1.7 in
Height	0.9 in
Weight	7.05 oz
Manufacturer Warranty
Service & Support	Limited warranty - 5 years
Environmental Parameters
Min Operating Temperature	32 °F
Max Operating Temperature	104 °F
Humidity Range Operating	10 - 90% (non-condensing)
Packaging Info
Package Weight	1.24 lb
Box Dimensions (LxWxH)	7.2 x 5.7 x 4.2"

1-Channel 12G-SDI to Single-Mode LC Fiber Transmitter
Simplex connection (LC connector)
12G-SDI input, which also supports 6G/3G/HD/SD-SDI
Reclocked loop through of SDI input

Related Questions and Answers

Q: 1. can this be configured as a 4x4 distro amp to simiply pass through each signal in a 4x camera setup to extend max cable length?

A: The AJA 12GM 12G-SDI to/from SDI Muxer/DeMuxer would be a very expensive distribution box. Instead use the Blackmagic Design Mini Converter SDI Distribution, for $165.00.

Q: 2. Does it have built in scaler?

A: The unit handles many resolutions and frame rates, but it's designed to convert the HDMI signal to the 12G-SDI (there will be no scaling involved -- it passes thru the exact same video stream that was sent in on the HDMI input). What it does well is, it acts as a distribution amplifier, giving you two identical signals that can go out via 12G-SDI, but no scaling is necessary for this purpose.

Q: 3. Does this unit support Quad 4K and/or 2SI (over 4 cables)? Does it support 6G 4K@30Hz or 23.98 to Quad 4K@30Hz or 23.98?

A: The AJA 12GM supports Two Sample Interleave (2SI) to/from Square Division (Quadrant) pixel mapping as well as Quad link 3G-SDI to 12G SDI conversion. Also, 6G to 12G quad signals in 4k 30 and 23.98 are supported. Manual: https://bit.ly/3HgrzjC Framerates and I/O: https://bit.ly/41TTT4Q

Q: 4. How many frames of latency does this converter introduce?

A: About 1 to 2 lines of scanning. Visit the document below: https://www.aja.com/assets/support/files/2374/en/AJA_Path_Delays_v02.2.pdf

Q: 5. can this reclock/amplify 4 sdi signals without muxing? looking for a 4 camera distribution amp in one box.

A: Yes, the AJA 12GM 12G-SDI to/from SDI Muxer/DeMuxer can be configured as a 1x4 distribution amplifier.

Q: 6. Does this unit switch between salvos without a glitch?

A: It does not. This is not a clean switch.

Q: 7. Does the AJA Kumo 1616 support 1080i50 input & output?

A: No, this does not support 1080i50. It gets close but no cigar.

Q: 8. Will it down convert two separate 6G SDI inputs into two separate 3G SDI outputs? What about four to four of the same scenario?

A: No, the AJA 12GM 12G-SDI to/from SDI Muxer/DeMuxer reclocks signals and does not convert down or up. You will need an AJA UDC Up/Down/Cross Converter which handles one signal at a time.

Q: 9. what is the most effective way to monitor the video inputs from this router ?

A: For monitoring you can connect this to a network and from there use an HTTP web browswer for control and monitoring.

Q: 10. Does this device support 23.98psf?

A: This supports outputs up to UHD 4K60. It should work well for 24fps.

Tim	08/09/2024
[Wired] We use this to get audio/video to the front and back of large conference rooms, works great. The cable is only as thick as a single regular XLR cable. 5

Carson	28/08/2024
[2 Watt] As a key component to route on the fly- AJA delivers with this one. Well worth the investment. Note I don't think they make the grey front anymore. The router I received has a blue stripe and larger logo screen printed on the front. 5

Ben	23/08/2024
[Wired] great compact switcher, the web gui is fantastic- it's not needed to be rebooted or have I had a loss of control in any way. very clean switching with an option for redundant power. If I need another, I'd chose this again without hesitation. 5

John	12/08/2024
[External] For Tactical fiber cables, these are ultra light weight, but they do take a beating! Great Cables! 5

josh	11/08/2024
[1.24 lb] I've come to expect well-made devices from AJA and the KUMO doesn't disappoint. Connectors are sturdy and well-spaced for easy access. I am using this unit to push video to several locations from four cameras we use for beauty shots. The GUI is simple yet provides all the features you would need in a router. I only had to crack open the manual once to set up a static IP. 5

Jeffrey	04/08/2024
[32 °F] What a great value! And great quality! The only negative is I wish there was some support for the dangling connectors while installing. 5

Christopher	14/07/2024
[1.24 lb] not much to say here. these work great with no issues. 5

John	14/07/2024
[2 Watt] While I wasn't a fan of the cost at first, this is certainly a product where we are getting what we paid for. Cars and trucks of all sizes run over these cables all the time while we are trying to set things up, and after a year, the cables still look new- no signs of damage or even wear. They have sat outside for over a month at a time, in the rain and snow (minus the ends), and they just work great. 5

Grant	26/06/2024
[6.2 miles] I have purchased 1 set of these to replace coax SDI lines we needed to remove in favor of fiber. So far my initial tests are good. We are just using it for HD-SDI, but If they continue to work, I will purchase another set and this will give us 6 transmit and 6 receive signals on each end of our link using 4 strands of single mode fiber. They are virtually silent except a small fan on the side and use locking screw on power cables which is nice to prevent loss of power from a connector getting pulled out. Also they are VERY small and compact. We will use heavy duty Velcro to hold them on a rack shelf long term. You can't beat that capacity for the price. 5