Klipsch Rp-440D-Sb On-Wall Passive Soundbar

Klipsch Rp-440d-sb On-wall Passive Soundbar

Product Code: eq50288
Availability: In Stock

$2,397.00 $2,876.40

Qty

8 reviews Write a review

Description
Reviews (8)

Consolidate the front speakers in your surround system with the Klipsch Reference Premiere Designer On-Wall RP-440D-SB Passive Soundbar. It features a three-channel design to take the place of your center and front left/right speakers, and handles up to 50W of continuous RMS power per channel from your amplifier. The soundbar is equipped with one 3.5" Cerametallic cone woofer and a 1" titanium dome LTS tweeter for the left and right channels, and two 3.5" Cerametallic cone woofers and a 1" titanium dome LTS tweeter for the center channel, to produce a full-range frequency response of 65 Hz to 25 kHz. Each tweeter is mated to a 90 x 90° Tractrix horn to help provide high-frequency response and extension, while enhancing imaging and dynamics. The RP-440D-SB can be wall-mounted with the built-in keyholes or placed on a tabletop with the included glass stand. Its grille attaches magnetically for a quick appearance change.

3-Channel, 2-Way Speaker Design Up to 50W RMS per Channel Power Handling 3x 1" Titanium Dome LTS Tweeter 4x 3.5" Cerametallic Cone Woofers 65 Hz to 25 kHz Frequency Response

Parameters
Frequency Response ± 3dB	65 Hz to 25 kHz
Sensitivity	92 dB @ 2.83 V / 1 m
Power Handling	RMS: 50 W per channel Peak: 200 W per channel
Nominal Impedance	8 Ohms compatible
Crossover Frequency	2.2 kHz
High Frequency Drivers	3x 1" (2.54 cm) titanium dome LTS tweeters with 90 x 90° Tractrix horn (1x per channel)
Low Frequency Drivers	4x 3.5" (8.89 cm) Cerametallic cone woofers (2x for center, 1x each for L/R)
Enclosure Material	ABS
Enclosure Type	Bass reflex
Inputs	3 x binding post pairs
Dimensions	42 x 6 x 2.4" (106.68 x 15.24 x 6.1 cm)
Weight	12 lb (5.44 kg)
Packaging Info
Package Weight	18 lb
Box Dimensions (LxWxH)	44.5 x 22 x 14"

The Tractrix horn geometry is designed to help improve high-frequency response and extension, while enhancing imaging and dynamics. It is also engineered to focus the high frequency sounds towards the listening area for natural sound.

The Linear Travel Suspension tweeter is designed to maximize dynamics for enhanced, detailed performance.

The Cerametallic woofers have been engineered to maintain rigidity with a lightweight construction for minimal cone breakup and distortion.

The front grille attaches magnetically for a simple change in aesthetics.

The dual four-way keyholes allow for easy mounting, while the included glass base provides for tabletop mounting.

Slim 2.4" design to match wall-mounted displays
Designed for flexible placement
Matte black finish

Related Questions and Answers

Q: 1. What is the THX mode on this THX subwoofer amp?

A: The THX switch provides a means to bypass the crossover and level controls when using a THX preamplifier or receiver. In the “On” position, the crossover and level controls do not function. (In this configuration, your preamplifier or receiver will perform those functions.) In the “Off” position, the crossover and level controls operate normally. Be sure the volume level on your preamplifier or receiver is turned down before changing the setting of this switch.

Q: 2. Is this compatible/will it fit on a Dell U2720Q UltraSharp 27"?

A: The Dell Slim Soundbar is compatible with: Dell UltraSharp 24 USB Type-C Monitor (U2421E) Dell 27 4K USB Type-C Monitor (P2721Q) Dell 32 USB Type-C Monitor (P3221D) Dell 34 Curved USB Type-C Monitor (P3421W)

Q: 3. Do the satellite speakers have tripod mounts?

A: Yes, the Klipsch ProMedia 2.1 Speaker System, (B&H # KLPROMEDIA21), satellite speakers have a 1/4-20'' tripod female thread at the bottom.

Q: 4. is this subwoofer compatible with audioengine hd3?

A: Yes, from the audio output of the HD3s you can.

Q: 5. Is 50 watts per channel enough to drive these speakers for a small to medium size room?

A: The Klipsch Reference Premiere RP-8000F II 2.5-Way Floorstanding Speaker (Ebony, Pair), BH # KLRP8000FIIK (B&H Kit), can be driven to decent volume levels without distortion with a clean 50 watts per channel amplifier or receiver in small to medium sized spaces.

Q: 6. Is this speaker powered or does it require an amplifier?

A: An amplifier or receiver is required o power this speaker.

Q: 7. is this model of subwoofer compatible with audioengine h3

A: The Audioengine HD3 speaker system willconnect with the Klipsch R-120SW 12" 400W Subwoofer BH #KLR120SWB.

Q: 8. Will this be compatible with major brand 4K TV Sets?

A: Most televisions output optical toslink. Only some of them have an 1/8'' headphone or aux output that would be directrly comaptible with the Klipsch ProMedia 2.1 Speaker System. If your television only has toslink optical, you can use a digital to analog converter like BH #FID03K for compatibility with the Klipsch ProMedia 2.1 speaker system.

Q: 9. Will these speakers work with Win 7?

A: The Klipsch ProMedia 2.1 Speaker System, B&H # KLPROMEDIA21, are compatible with any computer that offers a 3.5mm audio output. The operating system is not an aspect to look at for compatibility.

Q: 10. What cables are recommended to use with Mackie Big Knob Passive Studio Monitor Controller (Gray) BH #MABKPSMC?

A: The Klipsch Reference R-40M Bookshelf Speakers (Pair), BH # KLR40MBLK, cannot connect directly to the Mackie Big Knob Passive Studio Monitor Controller (Gray), B&H # MABKPSMC. The Mackie Big Knob is designed to connect with powered/active monitors.

Mark	18/09/2024
[12 lb (5.44 kg)] Easy and quick setup and looks clean and nice when completed. 5

Carl	14/09/2024
[12 lb (5.44 kg)] Great product. First bought a Monitor Audio SB-2. Sounded really bad. Returned it and upgraded to the RP-440D. Loving it! 5

Szymon	25/08/2024
[18 lb] I would be better if BH ship throughout Ups. Bose is good brand 5

newt	24/08/2024
[65 Hz to 25 kHz] These brackets fit the soundbar well. I had issues with the brackets to the wall to mount and an oval hole would allow the brackets to be slightly adjustable and to move a little more for side to side precision adjustment. The mount anchors for the screws will tear a very large hole in the sheet rock if they have to be relocated. 5

Brian	17/08/2024
[2.2 kHz] I have three of them for my LCR setup, the 90x90 horn really helps the center track sound great, I was even able to add back a little bass on my crossover to get more natural sounding voices over my older smaller LCR speakers. If you have a wall mounted tv and are looking for great sound without large speakers protruding off the wall, these are them. 5

Irv	05/07/2024
[12 lb (5.44 kg)] The Klipsch RP-1200SW is the subwoofer to get if your appreciate powerful bass. This sub replaced my 4-year old SPL-120 and I can tell that Klipsch worked overtime to deliver a high quality unit. This sub creates a much louder sound than previous models by improving components such as its newly designed driver. The RP-1200SW is actually. 6 longer than the previous model due to its added components. As I use this sub for movies, it has added extra bass you can really feel. It even punches up music as well. Its 12 woofer makes the great sound possible. Although Klipsch makes 4 models in this series, the 12 one is perfect for a normal-sized home theater. My only complaint is its pricing--$999 is nearly twice the price of my previous sub. However, at this price Klipsch is attracting only serious audio enthusiast. If your budget will permit it, the Klipsch RP-1200SW will truly enhance your home theater. 5

Todd	02/05/2024
[ABS] Quality mount, easy to install. well designed 5

Kenneth	02/04/2024
[ABS] I'm using 4 of these in my bedroom as the front and surround speakers along with the Klipsch RP-500C center channel speaker and two RP-140D speakers for the rear surround. Also have a R-112SW wireless subwoofer. Very happy with the result. It's like being at the theater. 5