The Soft Natural 3-Light LED Kit with Casefrom Soft Natural 3-Light LED Kit with Caseis a lightweight fixture in a polycarbonate housing that accepts Edison-base compact fluorescent lamps up to 50W, for a four-socket total of 200W. The fixture's bracket tilts and locks into position and features a standard 5/8" receiver that mounts on any 5/8" stud or accessory, and also accepts standard photo umbrellas.

3 x 4-Socket Fixtures    3 x Softboxes (20 x 27.5")    12 x Daylight-Balanced LED Lamps    3 x Light Stands (6')    1 x Kit Case with Shoulder Strap    Tilting Fixtures with 5/8" Receivers    120 VAC

Related Questions and Answers

Q: 1. Could this be used to shoot a video interview in a small room with a DSLR? I want to make sure I have enough lighting for 24fps at 1/50th...? It doesn't have to have a lot of emotion or anything, just has to be well lit to look like quality recording.

A: Yes this will work very well. If the room is small, you may have too much light with all the bulbs installed. The light can be easily adjusted by distance to the subject and number of bulbs in each fixture. I have been very pleased with this unit. Lots of good light, at around 5200K as I recall. Very well constructed and should give years of good service.

Q: 2. Would these be good for shooting apparel?

A: Yes! These lights would be a good choice for shooting smaller items. If you are looking to shoot larger items we would recommend a more powerful kit such as this 4-socket 3-light kit: https://www.bhphotovideo.com/c/product/945063-REG/impact_soft_n_natural_4_sockets.html

Q: 3. What is the weight of the whole kit? including the bag?

A: I use the three light kit almost exclusively with the soft box covers. Produces great light for VLOG production and fill light for shooting portraits. I purchased another IMPACT carry bag to make it easier to carry the kit, extension cords, etc.

Q: 4. Does this come with a plug?

A: Yes, one 2-prong plug for each fixture.

Q: 5. Are these lights silent? What about after a year? I've worked with low-end flo kits that buzzed and I don't want to waste my money on buzzy lights.

A: They don't have a buzz to them. They have a slight little noise but it's tolerable. They are not very bright though :/

Q: 6. If I wanted to switch out fluorescents for Tungsten bulbs, which would I use?

A: Hi Victoria, there are 3200k CFL bulbs out there. Alzo is a good brand. The large CFLs are a bit heavy for the stands, so it's wise to get the standard size bulbs. There are also some new 3000k LED E26 bulbs made by Eiko and others. I use LED bulbs and really like them.

Q: 7. Hello, are these special bulbs or can I just replace them with ones from my local store? Thanks!

A: They are not special. Youll want to get the CFLs though. Otherwise itll run way too hot.

Q: 8. Can the bulbs be illuminated individually? can you either switch off one or many bulbs or unscrew them so only 1 or two are on at a time?

A: Although each socket cannot be switched on/off individually, you can remove as many bulbs as you wish and still operate the light. Personally, I switch between setups with two 64W CFL bulbs and two empty sockets, and setups with four 26W bulbs and both work perfectly (have been doing so for about a year). To make things even easier, the white section on the softboxes are removable, so switching out bulbs for a different color balance or different bulbs is easy. I hope that answers your question!

Q: 9. The description says the bag holds 2 monolights, and stands, but the kit comes with three?

A: It holds all three, though i don't recommend taking them apart. I use the bag to transport the stands and move the box assembled. I hate putting the boxes together.

Q: 10. I am reading in the reviews that these light are not good for "key lighting." I intend to light a green screen. What is "key lighting.?

A: The key light is simply the main light you will set your exposure to. Any light can be a key light. If the light is appropriate to the shoot is a different issue based on camera settings and size of the area. these lights can be used for a green screen if the area to light is rather small.