Camvate C1621 Dual 1/4"-20 Shoe Adapter (Red)

Camvate C1621 Dual 1/4"-20 Shoe Adapter (red)

Product Code: eq50429
Availability: In Stock

$39.99 $58.79

Qty

13 reviews Write a review

Description
Reviews (13)

This red CAMVATE C1621 Dual 1/4"-20 Shoe Adapter (Red)from CAMVATE C1621 Dual 1/4"-20 Shoe Adapter (Red)is a cold shoe made of anodized aluminum alloy. It attaches to any two 1/4"-20 threaded mounts thanks to a slit in its center, using included screws and a hex key. The two screws must be spaced from 0.35 to 0.79" from center to center, with this dual design preventing the shoe mount from moving out of place. Use it as part of a wireless flash system, to attach a light to your cinema camera, or to support other accessories.

Cold Shoe Attaches with Two 1/4"-20 Screws Dual Attachment Prevents Deviation Anodized Aluminum Alloy Construction Screws and Hex Key Included For Flashes, Lights, Microphones, etc.

Parameters
Adaptor Type	Double 1/4"-20 threaded mounts to cold shoe
Spacing	Screws: 0.35 to 0.79" (9 to 20 mm) from center to center
Material	Anodized aluminum alloy
Dimensions	1.3 x 1 x 0.2" (34 x 26 x 6 mm)
Net Weight	0.8 oz (23 g)
Packaging Info
Package Weight	0.06 lb
Box Dimensions (LxWxH)	2.85 x 2.2 x 0.4"

Related Questions and Answers

Q: 1. Does B&H also sell anti-rotation pins for this cold shoe adapter?

A: No specific anti-rotation pins were located for this adapter.

Q: 2. Will this item fit on top of a standard mic stand?

A: The CAMVATE 5/8" Light Stand Head Adapter with Red 1/4"-20 Ball Head BH #CAC2880 is designed for light stands and will not fit directly onto a mic stand.

Q: 3. A photo of the product (rig shot) shows a handle with an attachment that houses multiple 1/4 20's. Where is that product on your website? Wouldn't it behoove BH to have that listed as an acessory?

A: Re: B&H Photo Video ...Promediagear 1/4 x20 Screw To Cold Shoe Adapter Cs2:Please go to B&H's website...https://a href= http://www.bhphotovideo.com/c/product/1236705-REG/promediagear_cs2_cold_shoe_adapter_with.html target= _blank www.bhphotovideo.com/c/product/1236705-REG/promediagear_cs2_cold_shoe_adapter_with.html/a

Q: 4. Does the screw allow you to adjust the tension of the tilt mount so that you can adjust the angle on the fly and have it stay put, or do you have to use the screwdriver to loosen and tighten the screw to lock it down every time you want to adjust it?

A: With the CAMVATE Tilting Shoe Adapter Support with 1/4"-20 Screw for Monitor/Light, you need to use the included screwdriver to loosen and tighten the tilt.

Q: 5. Can the shoe adapter be removed so it could be mounted to a tripod?

A: Yes the shoe adapter is removable and there is a 1/4" 20 mounting screw on both ends

Q: 6. Is the bottom of the cold shoe female threaded 1/4 20?

A: Yes. The following unit offers a 1/4"-20 screw hole.

Q: 7. hi there, will this fit on the C100 MK2 top handle. There is a groove at the back of the handle that I would like to convert to an additional horse shoe mount ?

A: If there is a 1/4-20 female or an area you can drill a hole then most likely yes! Is your handle metal? If you drill use a small lock washer to insure. I would not attach this to plastic and add any heavy lights, etc.. These are built strong and look great on your rig. Good luck.

Q: 8. Is it made of aluminum or steel?

A: This is believed to be made of steel.

Q: 9. Is the t-shaped handle available as a spare part ??

A: We do not have just the T-Handle as a separate part on our website.

Q: 10. Will this clamp unscrew far enough to fit the main pole diameter of a universal C stand?

A: This clamp has a range between 0.12 to 1.65 inches. The C-Stand will need to have a diameter between those numbers for it to clamp on to it.

Igor	11/09/2024
[0.06 lb] Mounts in any bracket or tripod with the 1/4 thread, small and lightweight. I like to have one on the side of the apex of larger tripods, just in case I need to attach an extra accessory (flash, mic, remote trigger, etc.). 5

Frank	03/09/2024
[0.06 lb] The designer of this adapter really earned his money with this design. The foot is nicely made with clean edges and a good black anodized coating. The shoulder thumb nuts are large enough to get a good grip on them while only the shoulder clamps the rim of the shoe. The screw is long enough to fully engage any load and the second thumb nut tightens the load. Very nicely done overall. 5

James	25/08/2024
[0.8 oz (23 g)] The headline says it. They are metal so they will last a lifetime. I am very happy to have purchased them. 5

Enrique	24/08/2024
[0.06 lb] estas zapatas son prácticas para colocar cualquier accesorio a la jaula o a otros soportes, son metalicos y tiene buen acabado. 5

Roger	06/08/2024
[0.06 lb] The knurled disc is easy to grip when you tighten, or untighten, this from the cold shoe, or the item you're mounting. This beats out the adapter that came with my LumeCube. Otherwise there's not much to say. The finish is good and it appears well made. I trust it will hold speedlights securely. 5

Harry	08/07/2024
[0.06 lb] Another difficult to find item that I bought at B&H. 5

David	19/06/2024
[0.8 oz (23 g)] I recently bought a CAMVATE universal camera cage, as well as this CAMVATE shoe adapter (2-pack). Both items came with two sets of screws for the shoe adapter: a silver/chrome set and a black set. I appreciate that CAMVATE is thinking about color coordination (or color matching) across different items in their product line! 5

Frank	12/06/2024
[0.8 oz (23 g)] perfect for adding more stuff to your small rig 5

Robert	02/06/2024
[0.06 lb] I purchased a sun sight for the eclipse. It was supposed to mount to the camera's hot shoe. It did not. I purchased this to bridge the gap. It worked flawlessly. 5