Arri Single Support Rod 3.5" 19Mm

Arri Single Support Rod 3.5" 19mm

Product Code: eq50621
Availability: In Stock

$117.00 $148.59

Qty

10 reviews Write a review

Description
Reviews (10)

The lightweight ARRI Single Support Rod 3.5" 19mm(3.5", 19mm) is designed to support a lens motor driving an Ultra or Master Prime lens mounted in the ARRI SAM-3 Stabilizer Adapter Mount. This stainless steel rod may also be used for any rig where space constrictions dictate the use of a shorter 19mm rod.

1 x 3.5", 19mm Rod Use with SAM-3 Stabilizer Adapter Mount Use for Lens Motor Support Lightweight Stainless Steel

Parameters
Rod Standard	19 mm
Material of Construction	Stainless steel
Rod Length	3.5" / 90 mm
Packaging Info
Package Weight	0.1 lb
Box Dimensions (LxWxH)	5.9 x 3.4 x 0.7"

Related Questions and Answers

Q: 1. Will it work with the DZO PICTOR ZOOM LENS on my FS5?

A: Yes. One of my favs to use at this unit allows horizontal / Vertical adjustment for more flexibility.

Q: 2. I will be shooting an A7s 2 as well as the 28-135 zoom lens - will I need this accessory for my cage???

A: I would recommend getting this. It is a great support for the lens. It works as advertised.

Q: 3. Does it work with a Canon 17-120 servo lens? Using it with a Sony FX9

A: The Tilta 15mm LWS Rod Lens Support is a Universal lens support solution that would work with any lens. Just add a baseplate with 15mm rods to use the Lens support with any camera model.

Q: 4. Can this be used on the fx6?

A: yes, you can mount an Fx6 to the ARRI Mounting Plate with 15mm Rod Support for Sony FS7II & FX9 Cameras.

Q: 5. Will this work with the Tilta Arri Standard Dovetail and baseplate? The rails sit wider than say the Zacuto universal baseplate.

A: Hello,The LS-T05 is made for standard 15mm rod systems. If I understand the baseplate you are referencing correctly, that is a 19mm system and is incompatible with the LS-T05 or LS-T05-A, depending on your lens.

Q: 6. Is this compatible with the ARRI BP-9 bridge plate?

A: The ARRI Mounting Plate with 15mm Rod Support for Sony FS7II & FX9 Cameras is not compatible with the ARRI BP-9 bridge plate.

Q: 7. It works with Tilta TT-03-GJ Rig Follow Focus Kit ? Thanks.

A: This Wooden Camera Lens Support will work with the Tilta. However, the lens will determine the length of the rods and exactly how well everything works together.

Q: 8. I have zacuto recoil rig, V1 for my Sony fs5. Will this work suitable for my Nikon 70-200mm? Or is there another suitable lens support system that can screw into the foot of the lens?

A: It will work. You can always use the cradle. My issue is the shaft that goes vertically through the bridge is too long. If that is not an issue for you then this is a good deal.

Q: 9. Is this piece necessary to use a TILTA TT-0506-A19 19mm Universal Dovetail Shoulder Mount System with a BMPCC 6k cage?

A: this is a 19mm Studio ARRI Standard Bridgeplate and is required if you're using 19mm accesories

Q: 10. What's the minimum height you can achieve with the 1/4" adapter attached? I have 1cm clearance between the tip of the rod and the foot of the lens. Need to bolt it in as a v-mount still allows the lens to move.

A: Tilta has informed us that the minimum height is 2 inches on the Tilta 15mm LWS Rod Lens Support with the 1/4"-20 adapter.

Luis Arturo	19/09/2024
[Stainless steel] Does the job. Buy a bunch. 5

Zayd	04/08/2024
[Stainless steel] Does exactly what it says. Low profile, strong grip, real quality construction. I've been using it to quickly reposition my viewfinder towards the back of my camera-- works like a dream. 5

Chris	26/07/2024
[Stainless steel] Great accessory for the trinity 1 or 2, Arri has an adapter plate to mount Teradeks and other aks from the bottom of the sled. Show is the possum solutions Aks plate with a Teradek attached. I’ve also mounted extra monitors recorders and gyros, use it so much bought a second one as a back up if I need to mount anything else to the sled bottom or Artemis sled system 5

Martin	02/07/2024
[3.5" / 90 mm] I used to use 15mm carbon fiber and aluminum rods. After you've tried steel or titanium rods, you'll never go back. They're more expensive and probably overkill for the majority of prosumer videographers with small mirrorless cameras, but if you're using a fully decked out Arri or RED cinema camera for film or TV projects, I recommend steel or titanium, and Tilta has a good track record with quality camera accessories. 5

Kei	24/06/2024
[3.5" / 90 mm] Simple piece of rigging with perfect build quality. I paired this with Tilta 15mm LWS Baseplate for RED DSMC2 Cameras for RED RANGER and Arri Dovetail. 5

Robert	13/06/2024
[19 mm] Stupid pricy but I can't say it's not good. I only needed a cheap and crappy one, but those don't seem to exist. 5

Santiago C.	27/05/2024
[3.5" / 90 mm] Very usefull to have as a camera assistant. 5

Gus	05/05/2024
[3.5" / 90 mm] I liked this 19-15 adaptor. Im steadicam operator and all my brackets are Jerry Hill. sometimes is difficult fit the motor on the lens and when I saw this, I realiza you can change the measure of the rods. I used twice since I bought and it works. 5