The black Reloop RP-7000 MK2 Turntable System Blackfrom Reloop RP-7000 MK2 Turntable System Blackfeatures a direct-drive motor and rugged construction. It is resistant to vibrations that can be caused by heavy bass sounds in DJ booths and its shock-absorbing feet help to further improve isolation. The surface is coated with a scratch-resistant high-quality black metalic finish. The RP-7000 MK2 features a statically balanced S-shaped tonearm with hydraulic lift and anti-skating mechanism. The tonearm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tonearm comes with a universal connection for pickup cartridge systems (SME).

The aluminum LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. An additional start/stop button has been integrated to facilitate a vertical setup (battle position) and by using the buttons on the system's top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mix.

Furthermore, using the high-resolution pitch fader you can adjust the platter speed in the classic turntable pitch range ±8%. However, the RP-7000 MK2 is also capable of a wider, DJ-friendly ±16% pitch range and a massive ±50% ultra-pitch. This allows for increased creativity when modulating the playing record's tone. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%).

Thanks to the recessed rear connection panel, the RP-7000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals.

The fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. In addition, the turntable break speed (platter stop) can be adjusted from 0.2 to 6 seconds and the precision-machined, heavy die-cast aluminum platter is lined with vibration reducing rubber to eliminate unwanted vibrations and resonance.

Powerful Direct-Drive Motor    Sturdy Rugged Construction    Heavy Weight for Vibration Resistance    Balanced S-Shaped Tonearm    Improved Tonearm Base for Stability    Dual Start/Stop Buttons    Precise Motor Control with Reverse    High-Resolution Pitch Control    Built-In Phono Preamp    Includes Slipmat, RCA Cable, Power Cord

Rigid chassis construction with heavier design and additional reinforcements out of metal, rubber, and molding compound for high-vibration damping and isolation

Powerful starting torque (adjustable from 2.8 - 4.5kg/cm)

Fine-tuned motor control for further optimization of wow and flutter and rotation

Height-adjustable tonearm base (VTA) and anti-skating control

Satin aluminum material used for tonearm

Adjustable pitch scale for precise adjustments

Easily replaceable, freely rotatable LED needle light in aluminum design

Quartz driven DJ turntable with upper-torque direct drive

Adjustable stop speed (0.2 to 6 seconds)

Precise control of motor with 3 speeds (33 1/3, 45 & 78 rpm)

Precision manufactured, die-cast aluminum turntable

Rubber inlays to reduce vibrations and background noise

Static-balance universal S-shaped tonearm with hydraulic lift and anti-skating mechanism

Universal connection for pickup systems (SME)

Pitch range ±8%, ±16%, ±50%

Quartz lock

Additional start/stop button for vertical positioning

Reverse Function: switch for forward and reverse operation

Recessed connection cavity for easy installation in cases & seamless adjustment

Phono and line out (no ground required)

Removable mains and cinch cable

Safety mains switch

Shock-absorbing feet to insulate against vibrations

Related Questions and Answers

Q: 1. Can the Ortofon 2m 78 stylus be used with the installed cartridge? Is switching the stylus instead of the cartridge problematic long term (wear) to enable playing of 78s? Will switching the stylus avoid needing to realign the cartridge?

A: Yes. The ReLoop comes with the 2M Red. Per Ortofon website: 2M Series styli interchangeability: The 2M Series' engines, coils and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations: - 2M Red, 2M Blue and 2M Silver - 2M Bronze and 2M Black - 2M Mono and 2M 78

Q: 2. Will this fit Pioneer PL-115D?

A: The Reloop dust cover is designed for the Reloop RP series turntables which have a dimension of 450mm x 352mm ( 17.71 x 13.85 ) WxD. Unfortunately we are not able to confirm fitment for other models as they have not been tested.

Q: 3. Will this fit a Stanton STR8-150?

A: No, the Reloop Dust Cover for RP-1000/2000/4000 Turntables and the Stanton STR8.150 Turntable are different in size and the cover will not fit. Dimensions for the STR8.150 Turntable are 17.71 x 5.74 x 13.89" (450 x 146 x 353 mm) and dimensions for this Reloop Dust Cover are 17.4 x 2.7 x 13.7" (442 x 68 x 348 mm).

Q: 4. Will this fit a Technics SL-220 ?

A: No, the Reloop Dust Cover for RP-1000/2000/4000 Turntables is not compatible for use with the Technics SL-220 Turntable. Dimensions of the cover are 17.4 x 2.7 x 13.7" (442 x 68 x 348 mm) and dimensions of the SL-220 are 16.9 x 4.96 x 14.8" (430 x 126 x 375 mm).

Q: 5. Is this a semi-automatic table?

A: Yes, and the semi-automatic motor stop can be switched on or off.

Q: 6. Will these fit on technics turntables?

A: These covers are designed specifically to fit on Reloops turntables. Please check out Decksaver Polycarbonate cover for SL1200 and 1210 Turntables. a href= http://bhpho.to/1ADM8up target= _blank http://bhpho.to/1ADM8up/a

Q: 7. Will this fit a Rega RP-1??

A: I'm sorry, but the Reloop cover you asked about will not fit a Rega turntable. You will need to get the correct cover from Rega.

Q: 8. Is a cartridge included?

A: Cartridges must be purchased separately. We would recommend the Reloop Concorde cartridge for straightforward playback/blending, or the Reloop Om cartridge for heavy scratch DJing.

Q: 9. The guy in the video says it's over 600 Lumens. B&H specs say it's over 700 lumens or 774 Lumens so which is it?

A: The manufacturers spec is 774 lumens for the high setting.

Q: 10. Can this turntable be connected by RCA only, without the need to ground?

A: Usually it is not necessary to ground your turntable as this already happens via the housing. However, should you notice a humming sound, please connect the grounding wire to the GND screw of your DJ mixer or phono pre-amp. If these devices are not sufficiently grounded, a humming sound might still occur.