The white Electro-Voice EVID-S5.2X is a pair of 5.25" 2-way 70/100V commercial loudspeakers designed to provide full-range sound reproduction and even coverage for system designers, installers, and audio engineers configuring systems for paging and background and foreground music in stores, clubs, eateries, schools, and more. Each speaker is IP65-certified for weatherproof use outdoors and features a fire-rated ABS plastic enclosure. A U-bracket mounting system and supplied mounting hardware enable simple and efficient setup.

A removable, locking 4-pin Euroblock connector allows for compatibility with commercial amplifiers. Access to the transformer settings is provided via a rear-panel rotary switch. The 5.25" woofer and 0.75" high-frequency driver yield a frequency response of 55 Hz to 20 kHz. With a 108 dB maximum SPL and a coverage area of 90° by 90°, the EVID-S5.2T speakers deliver consistent audibility and even sound distribution.

5.25" LF Driver, 0.75" HF Driver    IP65-Certified for Weatherproof Use    U-Bracket Mounting System    Fire-Rated ABS Plastic Enclosure    High Maximum SPL    90° x 90° Coverage    55 Hz to 20 kHz Frequency Response    Removable Locking Euroblock Connector    70/100V System    Includes Mounting Hardware

U-bracket mounting system allows mounting to a U-bolt, threaded rod, pole, or junction box

90° horizontal by 90° vertical coverage

Fire-rated ABS plastic enclosure

IP65-certified for weatherproof use in outdoor environments

5.25" long-throw woofer and 0.75" high-frequency driver

55 Hz to 20 kHz frequency response (-10 dB), 90 Hz to 20 kHz frequency response (-3 dB)

300W peak (75W continuous) power handling for 108 dB maximum SPL (114 dB peak)

Removable, locking 4-pin Euroblock connector accepts up to 12 AWG (2.5mm) wire size

Rotary switch allows easy selection of transformer power tap

Logo can be replaced to match speaker orientation

Related Questions and Answers

Q: 1. Do these speakers come with hanging hardware?

A: The Electro-Voice EVU2062/95 comes with a universal U-Bracket that allows for installation in horizontal or vertical configurations, and the ability to position the loudspeaker at any angle up to 330 of total rotation with the transformer kit accessory.

Q: 2. Can this work on 240V Ac input without changing fuse ?

A: Yes the Electro-Voice ETX-10P Portable Powered Loudspeaker is 100-240V compatible.

Q: 3. Are these a pair

A: Yes

Q: 4. What is the purpose of the Transformer? I am trying to replace identical speakers and not sure if I need the Transformer version or not. Thanks

A: Transformers are used in 70/100 volt distributed audio systems. If your older speakers have the transformer , then you would use these as replacements. If your system is not 70/100 volts, then you set the rear selector switch to 8 ohms.

Q: 5. Could two of these speakers be connected in parallel to a 4 ohm mono amp?

A: When conecting two of the Pyle Pro PDICRD 5.25" In-Wall/In-Ceiling 150W 2-Way Stereo Speakers (Pair, White) to a 4Ω amp, they should be wired in series to maintain an appropriate load.

Q: 6. Does this have auto standby?

A: Yes, the Electro-Voice EVERSE 8 Weatherized Battery-Powered Loudspeaker does have an auto-standby feature to extend battery life when no signal is present. The EVERSE 8 will automatically set itself to standby mode after 15 minutes without signal. The loudspeaker can be re-activated to full operation by pressing a button on the panel or with the app.

Q: 7. Can I use old Marantz receiver:2230 with 30W RMS per channel ?

A: These speakers require much more power than 30 watts. I would recommend the Bose 161 Full-Range Bookshelf Speakers (Black, Pair), BH #BO161B, which can handle 10 to 100 watts.

Q: 8. Do these speakers get hot when in use? Can I place insulation directly on top of them? Please advise of any concerns in this regard. Thank you!

A: These speakers have a very tone for their size and price. I have a bunch of the installed in our classroom for a couple of years now, and have never experienced heating or performance degradation.

Q: 9. Hi, am working in a venue with EVID4.2 speakers installed. I was hoping they are the 100v line version as they have the sticker for tapping on the back with a plastic plug in the middle. I cant find a "T" anywhere. Would these be 100 volt?

A: Constant Voltage / Transformer Taps 70 V / 100 V: 7.5 / 15 / 30 W or 8 Ohms Bypass 70 V: 3.75 W or 8 Ohms Bypass

Q: 10. what type of Amplifier is suitable for these speakers?

A: i use a crown xls 1500 and it seems to be properly sized. i also use distribution amplifiers to control a rack of amps, ie. another 2 crowns for fhe subwoofer, more evids, other locations, etc.