The single, Adam Professional Audio T-Series T5V is an affordable, high-quality, near-field, active studio monitor well suited for project studios, commercial recording facilities, and broadcast environments. The speaker features Adam's U-Art 1.9" accelerated ribbon tweeter with HPS waveguide and a 5" polypropylene woofer with a rear-firing bass-reflex port. The unit is bi-amped with 50W allocated to the woofer, while 20W powers the tweeter, which combine to provide a frequency response of 45 Hz to 25 kHz and a maximum SPL of 106 dB. The rear panel offers XLR and RCA connections with controls for input sensitivity, gain, high-shelf (-2, 0, +2 dB), and low-shelf (-2, 0, +2 dB). The Adam Professional Audio T5V ships with a power cord.

5" Polypropylene Woofer    U-ART 1.9" Accelerated Ribbon Tweeter    HPS Waveguide from the S-Series    Bi-Amped Class-D Amplifier    Total Output: 70W    High & Low Shelf Filters    Frequency Response: 45 Hz to 25 kHz    Maximum SPL: 106 dB    Includes Power Cord    Limited 5-Year Warranty

U-ART 1.9" Accelerated Ribbon Tweeter

• Allows longer operation with fewer signs of fatigue
• Breakup is prevented by the folded diaphragms, distortions are effectively reduced to a minimum
• Advanced dynamic range due to acoustically effective diaphragm surface that is 2.5 times bigger (compared to a classic tweeter according to the piston principle)

Air velocity ratio of 4:1 during the sound generation by folded U-ART membrane

• Direct, fast response in the high-range even with complex transients

HPS waveguide from the S Series

• Makes dispersion more consistent and imaging more stable over a wider area
• Reduction of early reflections on the surfaces of mixing consoles, desks, and more

Lightweight polypropylene construction of the woofer

• Excellent transient response even at high sound levels without breakup of the diaphragm

Vertical 2-way system with 5" woofer

• High resolution of the stereo image

Rear-firing bass reflex port

• Bass reproduction with very low compression

Linear frequency response of 45 Hz to 25 kHz

• Unbiased reproduction in a wide frequency band

Maximum peak sound pressure per pair in 3.3' (1 m) 106 dB

• Powerful, compression-free sound reproduction even at very high sound levels

DSP-powered crossover design

• Smooth frequency response without interference between the drivers in the critical midrange

Simple room acoustic adjustments via high- and low-shelf filters

• Allows optimal adaptation to acoustically difficult listening environments or individual preferences

Analog inputs over XLR and RCA

• Optimized for balanced and unbalanced line signals

Acoustically optimized cabinet geometry

• Reduction of unwanted reflections on the cabinets

Related Questions and Answers

Q: 1. Is this D2 version?

A: No. The M-Audio BX5 D2 Active 70W 5" 2-Way Studio Monitor Speaker - Pair (B&H # MABX5D2) is a discontinued model. The M-Audio BX5 Graphite 5" 100W Active Studio Monitor is a newer model which is single active studio monitor with updated features and more power.

Q: 2. I have a small studio/mix room (120 square feet/11 square meters). The room is acoustically treated, has a 5-foot X 6-foot ceiling cloud, and wall to wall carpet. I'm using Adam Audio A7X reference monitors. Would I be better suited using an Adam Sub 8 due to the smaller room size or the Sub10 to more closely match my A7X speakers?

A: Due to the room size, it may be more suitable to opt for the Adam Professional Audio Sub8 - 240W 8.5" Active Subwoofer as opposed to the larger Adam Professional Audio Sub10 MK2 - 200W 10" Active Subwoofer.

Q: 3. What is the A/D Converter for?

A: Because these monitors have DSP (Digital Signal Processors,) a high quality 24 bit/192 kHz A/D converter from Burr-Brown assures a pristine signal to the DSP section. The PWM-amplifiers are directly connected to the DSP section, so no additional conversion is necessary. This guarantees an extreme reliability.

Q: 4. Are monitors isolators included and why the warranty is 2 year and on manufacturer website is 5 year?

A: It is 5 year with registration with Adams-Audio. The isolators are NOT included:ADAM Audio USA:e-mail: usa-info@a href= http://adam-audio.com target= _blank adam-audio.com/a

Q: 5. what is the ohm ratings for these speakers?

A: The input impedance rating for the Adam Professional Audio T8V T-Series Active Nearfield Monitor is listed as 10 kOhm / 20 kOhm.

Q: 6. I assume these monitors cannot be used in the vertical orientation?

A: The A8H's waveguides can be rotated, allowing them to be used either horizontally or vertically.

Q: 7. It has 1x XLR 3-Pin Balanced Input. Is it for balanced AES/EBU cable with XLR connector, or XLR audio cable?

A: The Dynaudio Acoustics LYD 48 3-Way Nearfield Speaker Monitor (Left, Black) has a balanced XLR input for analog audio signal. It should not be used to connect digital audio signal from AES/EBU cable.

Q: 8. Could i use these with a tv?

A: Hi Noel R,Depending on what your goal is. We have a large screen TV and we connect a laptop to the TV and then the speakers to the laptop and it raises the volume of the TV. On the back of our TV there are many outlets to connect to other things, I am guessing that one of them would connect the speakers directly to the TV. I'm not TV savvy enough to know which one. Hope this helps, Gaelin

Q: 9. Hi, what is the wattage/ power consumption please? Thank you!

A: 0.28 A at 120 VAC/60Hz

Q: 10. Does it come in different colors?

A: This product is not offered in different colors.