Teradek Rt Mk3.1 Red Epic Bnc Phantom Cable 24"

Product Code: eq51028
Availability: In Stock

$299.85 $377.81

Qty

13 reviews Write a review

Description
Reviews (13)

Use this 24" Teradek RT MK3.1 RED EPIC BNC Phantom Cable 24"from Teradek RT MK3.1 RED EPIC BNC Phantom Cable 24"to connect the MK3.1 receiver to a RED BNC-version EPIC, or Phantom camera. Design features include one Hirose and one LEMO connector, both straight-angled. This cable will trigger the run/stop function on the camera, but does not power the camera on/off.

Connects Camera to MK3.1 Receiver Hirose to BNC Cable Run/Stop Function 2x Straight Connectors

Parameters
Cable Length	23.6" (60 cm)
Weight	Not specified by manufacturer
Packaging Info
Package Weight	0.05 lb
Box Dimensions (LxWxH)	2.4 x 2.1 x 0.3"

Related Questions and Answers

Q: 1. Would this work on a canon c300 mark iii?

A: The Teradek RT Latitude MDR LANC Run/Stop Cable (16") (B&H# TE111376) will connect to the 2.5mm LANC port of the Canon EOS C300 Mark III Digital Cinema Camera (EF Lens Mount) (B&H# CAC3003EF) for control using a Teradek RT MDR receiver such as the Teradek RT Latitude MDR-M Receiver (1-2 Axis) (B&H# TE150008).

Q: 2. Looking to use this with my Komodo and red recommends a 12g sdi cable. Does this qualify?

A: If your use is to use this for an EVF or on-camera monitor which uses SDI, this will work.

Q: 3. Can this handle 4k RAW from a sony FS5 into an Atomos recorder?

A: Yes it should.

Q: 4. Do these work with the mdr.s?

A: As far as we know the Teradek RT Thumbwheel S Standard Wired Controller only works with Latitude or MK3.1 systems.

Q: 5. is this cable SMPTE 2082 compliment?

A: It is not. Here is a cable from Canare that is SMPTE 2082 and capable of sending a 12G-SDI signal. https://bhpho.to/2TUx9iO

Q: 6. Does this work with the Teradek RT Latitude MDR-M (2 channel motor driver receiver) and Sony FX6 camera?

A: Yes, the Teradek RT Latitude MDR LANC Run/Stop Cable (16") will support the Sony FX6 Cinema camera.

Q: 7. Is the 4pin lemo connection male or female?

A: The DigitalFoto Solution Limited 4-Pin LEMO to BNC Timecode Synchronization Cable for RED EPIC (1.6') LEMO is male.

Q: 8. I'm trying to connect Dtap to Lemo to power my RedRaven through a Red DSMC2 V Lock I/O expander. Will this cable work?

A: Yes, this cable will work.

Q: 9. Can this initiate a autofocus mode between the Cinetape, MDR.X, and CTRL.3?

A: The Teradek RT Cinetape Interface Cable (2') will not initiate an autofocus mode between the Cinetape, MDR.X, and CTRL.3.

Q: 10. Would this work with the Ranger models?

A: Unfortunately, the Teradek RT ACI Module for RED DSMC2 will not fit the RED Ranger cameras.

Daniel	23/09/2024
[23.6" (60 cm)] I was in the market for a lightweight SDI Cable to not off balance my gimbal. This is great. I recommend 5

Derek	14/09/2024
[23.6" (60 cm)] I had never tried SHAPE BNC cables before; needed something solid for our Steadicam rigs and am really impressed with the build quality; will definitely buy more. 5

Christine	29/08/2024
[23.6" (60 cm)] I have a dozen of these and not one ever let me down in 3 years. 5

Carlos	22/08/2024
[23.6" (60 cm)] Though it seems to be a 3GSDI rated BNC Cable, it does send a signal to a Ninja V+. Now, perhaps I'm declaring my limited knowledge but I thought that I would have to go with a 12G SDI for that, and I did. However, I also ordered this cable and to my surprise it works! I'm guessing the issue may be reliability? So I'm sticking with the 12G SDI from Shape but keeping this to send the SDI from the Ninja V+ to a wireless transmitter. Also, it's good to know this can work in case of an emergency. 5

Chandler	02/08/2024
[0.05 lb] I use this for a 1080p feed to my SmallHD 702 Touch and it works great. I love how thin and flexible this is. 5

Michael	21/06/2024
[23.6" (60 cm)] I like the 90 degree thin cables, but not all of them are good. This one really works and holds up on set. 5

Christine	16/06/2024
[23.6" (60 cm)] These work great when you don't want clutter. Seem well made. I only wish they made a 3' version. 5

Zachary	08/06/2024
[23.6" (60 cm)] This cable rocks! I have tried tons of cables and this one by far has been the best one I have found to date. With the precise balancing of a gimbal every little thing puts stress on the motors causing the balance to be less than perfect. With these cables I have almost no additional strain on the motors of my MOVI while moving around. The cable itself is very flexible so it does not bind up. The connectors are solid and I have had no signal issues after lots of heavy use. These are the only SDI cables that I run In my camera packages! 5

Jeremy	02/06/2024
[23.6" (60 cm)] Love these cables. Well made and last. 5

Greg	28/05/2024
[23.6" (60 cm)] I like building my camera packages with these cables because of their integrated 90 degree heads and their small cable body. They have the strength to withstand heavy use, but don't feel bulky when I have 10 other cables running along my camera. There's a weight to the tips that I feel confident in, and the colors are an added benefit when you need to trace a cable run. I have 3 of these now and anytime I grab one of my others I notice the difference of what these offer that the others don't. 5