Teradek Rt Latitude Mdr Red Camera Cable 16"

Product Code: eq51073
Availability: In Stock

$299.85 $401.80

Qty

16 reviews Write a review

Description
Reviews (16)

Use this 16" Teradek RT Latitude MDR RED Camera Cable 16"from Teradek RT Latitude MDR RED Camera Cable 16"to connect the MDR receiver to a RED DSMC2/DSMC camera with a control port. Design features include two straight LEMO connectors, and a longer length than the 10" version of this cable. This cable will trigger the run/stop function on the camera, control EF-mount lenses, and more.

Connects Camera to MDR Receiver 16" LEMO to LEMO Cable For RED Cameras with CTRL Port Run/Stop, EF Lens Control & More

Parameters
Cable Length	15.7" (40 cm)
Weight	Not specified by manufacturer
Packaging Info
Package Weight	0.055 lb
Box Dimensions (LxWxH)	5.1 x 2.8 x 1"

Related Questions and Answers

Q: 1. Is it compatible with wooden camera top and bottom plates?

A: This device connects directly to the RED DSMC2 Camera's Right Side. It should still work with a top and bottom plate on the camera, it would just depend on the exact model of plates and how they sit on the camera.

Q: 2. Will the MDR be compatible with the Teradek TOF.1?

A: As of 12/09/2020, the ToF.1 is compatible with the Teradek RT MDR.X, CTRL.1 and CTRL.3.

Q: 3. Would this work with the Ranger models?

A: Unfortunately, the Teradek RT ACI Module for RED DSMC2 will not fit the RED Ranger cameras.

Q: 4. Would this work on a canon c300 mark iii?

A: The Teradek RT Latitude MDR LANC Run/Stop Cable (16") (B&H# TE111376) will connect to the 2.5mm LANC port of the Canon EOS C300 Mark III Digital Cinema Camera (EF Lens Mount) (B&H# CAC3003EF) for control using a Teradek RT MDR receiver such as the Teradek RT Latitude MDR-M Receiver (1-2 Axis) (B&H# TE150008).

Q: 5. Can this cable work with the Sony FX9? It says it can with the FS7. Thanks.

A: Yes, the Teradek LANC Run/Stop Cable for MDR.X Receiver (16") would be compatible with the Sony PXW-FX9 XDCAM 6K Full-Frame Camera System (Body) as the FX9 is able to be controlled via LANC.

Q: 6. is this same as teradek bolt 2 pin cable?

A: Yes. will work just fine. Just be mindful that the cable has a RA 4-Pin Hirose on the other end.

Q: 7. Can this initiate a autofocus mode between the Cinetape, MDR.X, and CTRL.3?

A: The Teradek RT Cinetape Interface Cable (2') will not initiate an autofocus mode between the Cinetape, MDR.X, and CTRL.3.

Q: 8. Would this work with the Sony FX9 to run / stop?

A: No, the Teradek LANC Run/Stop Cable for MDR.X Receiver is made to trigger from the Teradek MDR.X Receiver only.

Q: 9. I see that the module protrude out, wondering if it's compatible with the B1 Tilta cage

A: While you may be able to attach the Teradek RT ACI Module for RED DSMC2 (B&H# TE101322) to the Tilta Camera Cage B1 for RED DSMC2 Camera (V-Mount) (B&H# TIESRT01B1V), some may find doing so non intuitive and indeed the manufacturer has not suggested that it fits. It will not satisfy all camera operators, but it may fit to the satisfaction of some. The main issue is the attachment method, something a reviewer has commented on.

Q: 10. Will the MDR be compatible with RED Komodo for EF/RF lens control?

A: NO This is NOT compatible with the Komodo

Jason	27/09/2024
[0.055 lb] Although I typically try to keep anything audio related “out of the red”, these cables have helped me feed timecode from my tiny Tentacles to Red cameras. I still hate lemo connectors. 5

Louis Frederic	12/09/2024
[0.055 lb] Works as it should 5

Randal	12/08/2024
[0.055 lb] I used it to jam a RED Dsmc2 Monstro with (I believe) the ab mount expander back. Worked just as it should! 5

Zachary	04/08/2024
[0.055 lb] very small and lightweight. 5

james	02/08/2024
[5.1 x 2.8 x 1"] Red chose a very tiny lemonier port, so the cable is very thin and needs some care to avoid damage. considering the realities, Teradek did a good job. 5

Juan Carlos	28/07/2024
[15.7" (40 cm)] very good product 5

Tin	01/07/2024
[5.1 x 2.8 x 1"] No more cue tab and power adapter. Get this or get the 2 pin lemo - 2 pin lemo if your monitor have the output. 5

Chris	26/06/2024
[0.055 lb] I’ve been looking at this cable since it was announced, very curious on how the mdrx and cinetape integration works. It’s also very unclear to which version or models of cinetape it has to be, is it Cinematography Electronics, cinebug or Arri so to answer some questions. This works with the C. E. Cinetape original and cinetape 2 although still unclear about the other models it works with the original cinetape makers. This is a direct connection from the mdrx aux 1 port into the cinetape’s remote port. It’s very easy to set up and depending on the condition of your cinetape works extremely well and awesome paired with the ctrl 1 or 3 hand units and small hd monitors. 5