Teradek Rt Latitude Mdr Arri Run/Stop Cable 16"

Teradek Rt Latitude Mdr Arri Run/stop Cable 16"

Product Code: eq51075
Availability: In Stock

$329.85 $465.09

Qty

5 reviews Write a review

Description
Reviews (5)

Use this 16" Teradek RT Latitude MDR ARRI Run/Stop Cable 16"from Teradek RT Latitude MDR ARRI Run/Stop Cable 16"to connect the RT MDR receiver to an RS-port equipped ARRI camera. Design features include one LEMO and one Fischer connector, both straight-angled. This cable will trigger the run/stop function on the camera, but does not power the camera on/off.

Connects Camera to MDR Receiver 16" LEMO to Fischer Cable For ARRI Cameras with an RS Port Run/Stop Trigger Function

Parameters
Cable Length	15.7" (40 cm)
Weight	Not specified by manufacturer
Packaging Info
Package Weight	0.04 lb
Box Dimensions (LxWxH)	3 x 2.7 x 0.6"

Related Questions and Answers

Q: 1. Does this cable provide camera control via a Hi-5, or only run/stop?

A: The CAMVATE ARRI 7-Pin to RED 9-Pin and D-Tap Run/Stop Cable (24") only supports control of the start/stop trigger, no other camera control is supported.

Q: 2. Will the MDR be compatible with the Teradek TOF.1?

A: As of 12/09/2020, the ToF.1 is compatible with the Teradek RT MDR.X, CTRL.1 and CTRL.3.

Q: 3. Do these motor cables work with Motr.X and MDR.X?

A: All we know for sure is that the Teradek RT Latitude MDR Motor Cable (8", RA to RA) is compatible with the Latitude MDR and the MK3.1 receivers.

Q: 4. Can I use that on panasonic varicam lt?

A: No, the Teradek RT Latitude MDR Sony F5/F55 Run/Stop Cable (16") does not work with the Panasonic Varicam LT.

Q: 5. Is this compatible with the earlier model Alexa's such as the Classic and Alexa Plus?

A: No, the Alexa Classic and Alexa Plus use a Fisher 3-pin RS port. This cable has two 7-pin LEMO type connectors.

Q: 6. Does this work with the Teradek CTRL.3 Latitude MDR-X and a Sony FX9 camera? One side is a 2.5mm LANC and the other side is?

A: Yes, this cable [Teradek RT Latitude MDR LANC Run/Stop Cable (16")] is compatible with the Sony FX9. The other end of this cable has a 6-pin LEMO port. Teradek calls it a CAM port.

Q: 7. Does this cable plug into hand grips or into motor for camera run/stop?

A: This cable plugs into the motor.

Q: 8. Would this work on a canon c300 mark iii?

A: The Teradek RT Latitude MDR LANC Run/Stop Cable (16") (B&H# TE111376) will connect to the 2.5mm LANC port of the Canon EOS C300 Mark III Digital Cinema Camera (EF Lens Mount) (B&H# CAC3003EF) for control using a Teradek RT MDR receiver such as the Teradek RT Latitude MDR-M Receiver (1-2 Axis) (B&H# TE150008).

Q: 9. Will this work with this Komodo Cage? https://www.bhphotovideo.com/c/product/1685623-REG/tilta_ta_t08_amv2_b_v_mount_advanced_po

A: The Tilta Nucleus-M Run/Stop Cable for ARRI ALEXA Mini with Tilta Cage (B&H# TIRS02AM) cannot plug into the Tilta Advanced Power Distribution Module for RED KOMODO (Black, V-Mount Type II) (B&H# TITAT08AMV2B): https://bhpho.to/3H8c4Lh

Q: 10. Would this work with the Sony FX9 to run / stop?

A: No, the Teradek LANC Run/Stop Cable for MDR.X Receiver is made to trigger from the Teradek MDR.X Receiver only.

Andy	08/09/2024
[15.7" (40 cm)] This cable works great. It's small and matches the rest of the set look wise. Couldn't ask for a better cable. 5

Chris	11/05/2024
[3 x 2.7 x 0.6"] I’ve been looking at this cable since it was announced, very curious on how the mdrx and cinetape integration works. It’s also very unclear to which version or models of cinetape it has to be, is it Cinematography Electronics, cinebug or Arri so to answer some questions. This works with the C. E. Cinetape original and cinetape 2 although still unclear about the other models it works with the original cinetape makers. This is a direct connection from the mdrx aux 1 port into the cinetape’s remote port. It’s very easy to set up and depending on the condition of your cinetape works extremely well and awesome paired with the ctrl 1 or 3 hand units and small hd monitors. 5