This black Peak Design Clip Capture v3 Blackfrom Peak Design Clip Capture v3 Blackserves as a replacement part or as an additional support point for the Capture v3 harness system. By equipping more than one bag or strap with Capture clips, you can carry several cameras at once or switch between the two clips easily for comfortable and versatile use. Note that a plate is not included with this product, and must be purchased separately in order to carry equipment.

Keeping a slim profile at only 3.3" in length and weighing just 2.5 oz, the clip uses included thumbscrews or hex-head bolts to clamp onto any strap or belt as wide as 2.5" and as thick as 0.87". It is made of weatherproof aluminum to resist rust and is designed to withstand up to 200 lb of force. The clip is equipped with a quick release button so you can instantly grab your camera and start shooting, and it has a security lock that can be activated to prevent accidental release during longer trips. For enhanced stability, an anti-slip pad is used on the back plate for grip. All legacy Peak Design plates work with the Capture v3 clip except for the DUALplate v1, allowing you to carry objects such as lenses, binoculars, or GoPro cameras with optional accessories.

Clip Only, Replacement or Extra Part    For Straps up to 2.5" Wide & 0.87" Thick    Withstands Forces up to 200 lb    Quick Release Button for Instant Access    Slim Profile: 3.3" Length, Weighs 2.5 oz    Security Lock Helps Prevent Accidents    Anti-Slip Pad for Improved Stability    Rust-Resistant Aluminum Construction    Works with Most Other Peak Design Plates

• Replacement or additional clip for Capture v3 system, plate must be purchased separately in order to carry equipment
• Made entirely of rust-resistant aluminum and designed to withstand up to 200 lb of force
• Fits straps or belts up to 2.5" wide, and as thick as 0.63" with thumbscrew bolts or up to 0.87" thick with hex-head bolts
• Anti-slip pad for better grip on the mounting surface, increasing stability
• Quick release button for swift and easy access to camera
• Security lock prevents accidental release for safety during longer excursions
• Slim design with a length of 3.3" and a weight of 2.5 oz
• Compatible with all Peak Design plates except for the DUALplate v1, allowing for objects such as GoPro, lenses, and binoculars to be used with optional accessories

Related Questions and Answers

Q: 1. Does this PD arca plate fit on Sirui ST125 ST-Series Carbon Fiber Tripod with K-10X Arca-Type Ball Head (B&H #SIST125K10X)?

A: Yes, the plate from the Peak Design Capture Camera Clip v3 (Black) will fit into the Sirui ST125 ST-Series Carbon Fiber Tripod with K-10X Arca-Type Ball Head.

Q: 2. Checking so I don't buy an extra...Is the arca plate that comes with this work with MeFOTO MeFOTO RoadTrip Aluminum Travel Tripod Kit (Titanium) MFR #A1350Q1T • BH #MEA1350Q1T ?

A: Yes, it is compatible with the Mefoto Roadtrip.

Q: 3. Will this hold a Z8 with a 150-600 sigma or 180-600 nikon?

A: Yes, the Peak Design Capture Camera Clip v3 (Black) can hold a Z8 with a Sigma 150-600mm or a Nikon Z 180-600mm. However, it may not be comfortable.

Q: 4. Why doesn’t the Peak Designs capture clip plate work with the Manfrotto BeFree tripod that is advertised as arca compatible?

A: The quick release plate that comes with the BeFree is Arca compatible, but the Manfrotto Befree ball head does not work with Arca style plates. The best option here is to buy this Peak Design plate that is both compatible with your Capture Clip and the Manfrotto BeFree tripod. https://bit.ly/3HtbtDB

Q: 5. Does anyone know a tripod head where the PD plate is secured against slipping out?

A: This plate is ARCA-Swiss compatible so it would work with any ARCA-Swiss head.

Q: 6. Can you use a wrist strap and the clamp together? My camera (EM-1,mk2) should be secure when clipped but I would still like to have a wrist strap to keep my grip secure.

A: Yes. I use the Peak Design Cuff Camera Wrist Strap along with the Capture Clip and there is no interference. You could also use the PD Clutch Camera Handstrap. If you use the Clutch Camera Handstrap with the Capture Clip, you will have to be careful about where you attach the loop fitting to the Arca plate on the bottom of the camera. They definitely work together as long as attach the loop where it won't interfere.

Q: 7. Can you still access the battery door on a Fuji X-T1 with the plate screwed into the body?

A: Nope. I have the Fuji X-t1, sadly the plate still won't access the battery door. The slot is simply not long enough and the screw head is too big. Potentially can modify the plate... but that's at your own risk.

Q: 8. does this clip still work as a quick release plate for a monopod? Previous versions could be screwed onto a 3/8 stud to act as a quick release.

A: On the V3, there is no longer a tripod thread hole on the backside of the backplate. Though both our Standard Plate and Dual Plate are both tripod compatible with most mounts on the market. See here: a href= https://support.peakdesign.com/hc/en-us/articles/201291333-Tripod-Compatibility target= _blank https://support.peakdesign.com/hc/en-us/articles/201291333-Tripod-Compatibility/a

Q: 9. I already have a ARCA type tripod and plate. Will the plate I have fit the clip itself? Basically, can I buy just the Peak Design V3 Capture Camera Clip or do I have to buy both the plate and the clip?

A: No, a standard ARCA Plate won't fit into the Capture Clip. You have to use their plate in order to use the clip. However, if you already have an ARCA tripod, the Capture plate will fit the ARCA tripod.

Q: 10. The screw of the plate, what threading spec is it 1/4" or 3/8" ??

A: The Peak Design Capture Camera Clip v3 (Black) has a 1/4"-20 screw for attaching the camera to the plate.