Illuminate the aquatic world at depths as great as 492' with the silver 20° Underwater Kinetics Aqualite Pro eLED Dive Light Head 20º SilverAqualite Dive Lights. The spot beam is narrow enough to be an effective focusing light or a means of exploring tight spaces, but also wide enough to be a general backup or primary dive light. This LED head features three or four outputs ranging from 160-750 lumens, depending on which light body you're using. Additionally, the lights' batteries provide run times that vary from 1.6 hours on the high-output setting to 12 hours on the low setting.

Depth Rating: 492'    Multiple Outputs from 160-750 Lumens    Run Time: 1.6-12 Hours    20° Beam Angle    Color Temperature: 5500-6500K    Compatible with All Aqualite Dive Lights    Requires Light Body and Battery    Anodized Aluminum Alloy    Made in the USA

• Light source: eLED
• Four outputs on the Aqualite Pro: 160, 300, 430, and 750 lumens
• Up to 500 lumens on the Aqualite-S and Classic
• Run time: 1.6-12 h on the Pro, 2.0-9.0 h on the S
• 20° beam angle makes the head effective as a focusing light and tool for exploring tight spaces, while also allowing for use as a general backup dive light or even a primary one
• Spot beam ensures good visibility by reducing the reflection of light off particles in the water, which is known as backscatter
• Daylight-balanced color temperature of 5500-6500K restores hues that are absorbed by water, so you can see everything in rich, vibrant, accurate colors

• Depth rating: 492'
• Crafted from a machined aluminum alloy known as Hydralum, which acts as a heat sink for cooling
• Anodized for excellent corrosion resistance
• Light heads are interchangeable and can be connected to all Aqualite bodies, including the Pro, S, and Classic
• Made in the USA

Related Questions and Answers

Q: 1. I need a red filter for my tovatec camera and I can't find one

A: There isn't a red filter for the Tovatec Mera Dive Light with Camera. If there was it would filter the camera and the light so the images would be too red. If you move in really close to your subject the built-in light should correct the color.

Q: 2. What is the beam angle of this light?

A: The beam angle is 15-20 degrees.

Q: 3. Does it record audio?

A: No, following unit will only capture video and still images.

Q: 4. Hi, can you tell me if the size of the battery is printed on the outside? If so, how many Wh is it?

A: The Godox WT60R RGB Dive Tube Light (25") has max. 77w power underwater and max. 14w power above water.

Q: 5. Can I use it with an existing tray with standard 1# ball attachments?

A: You could use the SeaLife Sea Dragon 2000F Photo-Video Dive Light with a ball joint arm by adding the SeaLife Flex-Connect Ball Joint Adapter. Here is the link: https://bhpho.to/2GExGP3

Q: 6. Will this fit the C8 light cannon eLED light?

A: The correct model is the Underwater Kinetics C8 eLED L2 Lamp and Bezel/Reflector Module for Dive Light, B&H # UN519965. https://bhpho.to/2JJLoSP

Q: 7. What is the best resolution to set for underwater video?

A: Just like on land it is best to set the camera at the highest resolution. You could always lower the resolution in the computer. You cannot increase it.

Q: 8. Will this case carry and protect a Nikkor 300 2.8 MM lens?

A: Yes, however you will need foam inserts.

Q: 9. Can this light use the uv-395 eLED lamp Head ?

A: According to Underwater Kinetics, the factory installed lights can be replaced with these ones as well.

Q: 10. Is the charger dual voltage?

A: The charger that comes with the Tovatec Fusion 1050 Video LED Dive Light is not dual voltage. It is 120V.