The two-input Thor SDI to QAM Modulator IPTV Encoder 2-Inputfrom Thor SDI to QAM Modulator IPTV Encoder 2-Inputbundles a real-time HD hardware encoder with a managed program stream multiplexer and RF QAM modulator. It can encode two channels of HD-SDI video to MPEG-2 or H.264, and modulate the programs on QAM carrier outputs. The unit can also modulate programs encoded externally via an ASI input. This platform is suitable for corporate MATV systems or in-house HD video distribution from SDI sources.

Quadrant Amplitude Modulation (QAM) is commonly used in cable TV systems due to its high bandwidth. The QAM-IP chassis supports all three primary J.83 QAM standards; ITU-T J.83A, J.83B, and J.83C. Any QAM-IP chassis can be set to output RF carriers under either of these three standards without the need to change firmware. The encoder modules are independent of the modulator chassis system.

The HD-SDI uncompressed digital video is commonly used in broadcasting and professional A/V systems. Serial digital video can be carried over single-conductor coax cables employing common BNC connectors. The low-latency encoding reduces the time delay between video input and encoded program output.

• Broadcasts live HD-SDI video and ASI as cable TV and IPTV channels
• Broadcasts over the existing coaxial cabling to an unlimited number of televisions with Full HD resolution
• Low-latency encoding
• Encoding latency of approximately 70 to 110 ms
• Any SDI input up to 3G-SDI at 1920 x 1080p60
• ASI input SPTS or MPTS up to 120 Mb/s
• Fully network-managed through browser
• QAM-256/64 RF output
• IPTV output unicast or multicast IGMP UDP, RTP/RTSP
• ASI output with multiplexer cherry picking

Related Questions and Answers

Q: 1. would this device be able to display unencrypted catv digital signals? we use them at our business from a blonder tonue encoder.

A: The Thor QAM CATV RF and ATSC RF to HDMI Decoder Set-Top Box is designed to decode ATSC and QAM Signals.

Q: 2. Is a LTR Subscription required to use the solo U?

A: An LTR Subscription is not required. However it is recommended by LiveU if you are going to be using the unit out in the field.

Q: 3. WHAT SIZE USB WOULD I USE ?WHAT GB ? THANKS

A: USB 2.0 speed has a maximum speed of 480Mb/s.

Q: 4. Can this encoder simulcast to Facebook, YouTube, and a website?

A: Hi Eleazer and thank you for your question. We can output our stream to one destination. To simulcast to multiple destinations you can use one of our integrated partners like Restream.io or Switchboard Live.

Q: 5. Does the Solo do bonding without the LRT service? I know the Solo can be used without LRT, but is there any form of bonding without LRT? It's not clear to me from reading the LiveU Solo Expert responses.

A: Thats good question. I bought a solo from B&H. It was cheaper at 995 bucks without LRT.Upon firing up the unit for the first streaming it pumped me right into LRT. I checked out my account and it said I'd purchased it from another source.I dont have any record of that but I'm using it anyway.

Q: 6. Does this hook up directly to internet/YouTube or to a laptop and from there to internet-YouTube?

A: This connects directly to youtube, etc through an internet connection. It does not need a laptop to function in the field. We have used a cellular usb modem, direct Cat5 internet connection, wifi, and a Cradlepoint cellular device to access the internet with no issues. We start the stream by accessing the Solo website with a smartphone. The events can be pre-configured using a pc but its not required. I hope this helps and we highly recommend using the LiveU Solo.

Q: 7. We would be using it in a church with a dedicated WiFi for streaming. Do we need to buy anything else to stream via WiFi?

A: No you don't need anything else. The unit could be used just on WiFi alone or Ethernet alone.

Q: 8. Can this unit connect to wifi without a USB modem connected? We are looking to connect as wifi only. No bonding. No direct wire connection to a modem.

A: The unit also has a CAT5 connection. And if you are at a difficult site, you can mix all 3.

Q: 9. Would this work with Altice/Cablevision? Any idea?

A: No, The Thor QAM CATV RF and ATSC RF to HDMI Decoder Set-Top Box will not work with any cable TV service as cable TV QAM is encrypted. This unit works with clear QAM or off-the-air ATSC antenna signals.

Q: 10. Does the Live U support HLS - HTTP Live Streaming? Will it in the future?

A: The LiveU Solo SDI/HDMI Video Encoder with 3-Connection Starter Kit does not support HLS / HTTP streaming at this time. LiveU has not stated whether it will support this in the future.