The 10' LEMO FUW Male to LEMO PUW Female Indoor Studio Fiber Camera Cable from Camplex features ultra-precision LEMO-certified, machine-polished fiber contacts for the most demanding high-speed uncompressed HD video transmissions over long distances. All assemblies are multi-stage machine-polished and tested for <0.55 dB RL with test results (diagnostics) supplied with each cable. This cable meets SMPTE 304M/311M standards for HDTV broadcast use, and it is built by LEMO-trained technicians.

Assembled with Belden flexible studio broadcast cable, it integrates the power line for TV cameras, control line, and optical fiber for video and audio transmission. It consists of two single-mode optical fibers, four 20 AWG and two 24 AWG-tinned copper conductors cabled around a steel-strength element, and an overall tinned copper braid. This general-purpose cable is used for studios, patching, and light-to-medium field use. A flexible PVC blend jacket allows for ease of use within the studio.

Assembled with Belden 96040 flexible studio SMPTE cable and LEMO connectors

Industry-standard cable

Terminations by LEMO-certified technicians

Electrical assemblies 100% tested for continuity and short circuits

Fiber optic assemblies 100% tested for attenuation and back reflection

SMPTE 311M and 304M compliant

Stainless-steel assembly

Rubber dust caps

19.4 Mb/s to 3 Gb/s transport rate

Machine-polished fiber contacts

Low insertion and return loss

Related Questions and Answers

Q: 1. Is this cable shielded?

A: The Tilta 2-Pin LEMO-Type to 3-Pin Fischer-Type Cable is not a shielded cable.

Q: 2. If i have a 5 camera set up how many fibre converters do I need?

A: You will need a Camera Fiber Converter and Studio Fiber Converter for each camera.

Q: 3. Is this compatible with Small HD monitors?

A: As long as the model you're referencing has the proper, matching polarity as this LEMO cable, then it will be fine, but just to be extra careful, a safer option would be something like this dummy battery to D-tap option - https://bhpho.to/36fKoRx (or one with Canon LP-E6 dummy to d-tap).

Q: 4. Can this be used for the ZCam M4?

A: Unfortunately we can not say if the Camera Motion Research 36W 2-Pin LEMO to AC Adapter Cable (7') will work, as we can not verify if the polarity matches that of the input on the Z CAM E2-M4. I'd recommend using the GyroVu USB to Sony L-Series Dummy Battery Cable with Power Supply (40")(BH #GYGVUSBSLPS) instead. See: https://bhpho.to/30OkDpW

Q: 5. Is this BMPCC4K compatible?

A: We are not aware of this cable being compatible with the Pocket Cinema Camera 4K. While it appears that the camera has a 2-Pin Lemo, it is not a different kind of connection. Woooden Camera has a D-Tap cable specifically for the Pocket Cinema 4K with the proper connection, B&H # WO264100. https://bhpho.to/2q5twbe

Q: 6. Are these compatible with the ATEM 2 M/E Production Studio 4K?

A: Yes, the Blackmagic Design Studio Fiber Converter can be used with the Blackmagic Design ATEM 2 M/E Production Studio 4K.

Q: 7. Needing to connect to existing Telex intercom system. Can I connect this directly to a Telex PS15 by building my own DB25 cable or do I need an interface (Telex DSI-2008) to make them work together?

A: The connections to the Fiber Converter require a 4 wire interface. You would need a 2 wire to 4 wire interface. Then build a custom cable with DB-25 for our end and whatever the 4 wire interface needs.

Q: 8. Do they have lower heights?

A: The minimum height for this stand is 64.5", they do not sell a smaller version of this stand.

Q: 9. how stable is the camera in a breeze? Any rock or waviness?

A: It is recommended to use the Studio Assets Stabilization Spreader Kit for the MegaMast, BH # STSA1250 for further stabilization on this stand. https://bhpho.to/31OL1PV

Q: 10. Can you use this cable to power a teradek bolt 500 xt and teradek bolt 500 HDMI Lt? Or do you have to use the cable that teradek makes?

A: yes this cable can be used to power the Teradek Bolt 300/500/600/Sidekick II