The Rycote Stereo Cyclone DMS Kit for Schoeps CMIT 5U, CCM 8, CCM 4is a windshield system offering acoustically transparent protection for location sound mixers and recordists using a double mid-side array of Schoeps CMIT 5U, CCM 8, and CCM 4 microphones in broadcast TV, film, video, and game audio production. It features an enhanced Connbox design with no straight or parallel surfaces to reduce room tone and resonance. Its Lyre mic suspension and Floating Basket Suspension improve vibration isolation and minimize handling noise.

The 3D-Tex material delivers significant attenuation of wind noise while being easy to clean. Further contributing to the system's low maintenance is the magnetic locking design, which allows one-handed opening and closure. The one XLR and two LEMO inputs match the connectivity of your Schoeps CMIT 5U and CCM microphones, and the XLR 7-pin output contributes to effective cable management. Boompole compatibility is offered via a brass 3/8" UNC female thread.

Lyre and Floating Basket Suspension    Improved Vibration Isolation    Acoustically Transparent    Reduced Room Tone and Handling Noise    Significant Wind Noise Reduction    Magnetic Locking System    No Straight or Parallel Surfaces    Low Maintenance, Easy to Clean    LEMO and XLR Inputs    XLR 7-Pin Output

Each Stereo Cyclone windshield is individually hand-built in the Rycote factory in Stroud. This very specialized manufacturing process is carried out by a highly skilled Rycote technician and takes many hours to complete.

Designed specifically for internal cable routing, isolation, and vibration reduction, each Connbox has been optimized for specific stereo and multichannel microphone configurations. Every wire and connector has been precisely measured to offer maximum performance.

Rycote uses its industry-leading Lyre microphone suspension to reduce the bulk of shock and handling noise. The Stereo Cyclone also features the Rycote Floating Basket Suspension: an innovative design that prevents natural resonances and vibrations from bypassing the main suspension and radiating from the structure of the basket itself.

The Lyre principle is incorporated into the portions of the suspension that connect directly to the basket; the entire structure "floats," isolating problematic internal vibrations originating from boompoles and other sources.

Stereo configurations are particularly susceptible to the effects of acoustic re-radiation, since more microphones point at the overall surface of the basket. The incorporation of the Floating Basket Suspension results in a windshield with superb vibration isolation.

An open-cell structure consisting of curved contours and no straight or parallel surfaces greatly reduces room-tone effects inherent in conventional tubular windshield designs. The physical design shifts the overall bulk to the basket front. The aerodynamically efficient asymmetric basket covered with 3D-Tex material provides enormous benefits in terms of surface turbulence and acoustic impedance, resulting in wind-noise reduction comparable to the combined modular-style windshield/fur cover performance. In truly extreme weather conditions, a Cyclone Windjammer (available separately) can be used to deliver superior wind-noise reduction.

The windshield can be removed from or attached to the suspension in an instant using just one hand, allowing audio professionals to capture the best possible audio at any moment in any environment. This is the unique benefit of Rycote's Z-Locking System. Reassembly is automatic as components magnetically snap into perfect alignment.

Location sound mixers require equipment that will not only withstand extreme conditions, but also maintain consistent performance. Maintenance is often a time-consuming yet necessary evil. The Stereo Cyclone's 3D-Tex was developed for both outstanding performance and ease of maintenance. Dust it off after mild use or rinse and air dry after heavy use to maintain outstanding, transparent, and consistent performance for years of faithful use.

Related Questions and Answers

Q: 1. Can this be used on a Nikon Z9 Camera in Video Mode..?

A: No, the Schoeps CMIT 5U Shotgun Microphone Softie Kit is not natively compatible with the Nikon Z9. You would need a preamp unit like B&H # BEDXAPRE.

Q: 2. What is the size and weight of this microphone?

A: As per the Manufacturer: CCM 41 LG Length: 46 mm Diameter: 20 mm Weight: 45 g

Q: 3. Having this microphone a built in amplifier does it require phantom power?

A: Yes, the Schoeps CCM 41 LG does require phantom power.

Q: 4. How should this windshield be stored and transported - what type of case?

A: There is no specific case designed for storing and transporting the windshield, but you could use a hardshell case like those made by Pelican and SKB or use a padded carry bag.

Q: 5. Altavoces CCM683 es posible instalarlos en automvil Volvo S90?

A: The Bowers & Wilkins CCM683 8" 2-Way In-Ceiling Speakers (Pair) BH #BOCCM683 are made for in-ceiling use. They are not made to fit or work in a car.

Q: 6. which windjammer works with the Rycote Stereo Cyclone MS Kit 11 Windshield System for Sennheiser MKH 416 and MKH 30?

A: The Rycote Cyclone Windjammer for the Cyclone Windshield - Medium (B&H # RYCWJM) can be used with the Rycote 089120 Stereo Cyclone MS Kit 11 Windshield System.

Q: 7. waht is most motch raincover with this?

A: Hi there. Thanks for your question! Rycote currently doesn't provide a rain cover for the Cyclone. The unique 3D-Tex fabric used in the Cyclone's construction provides good performance in wet conditions, but is not waterproof (only water resistant). We do provide a range of Duck rain covers for our Modular range, which offer rain protection above the basket. See here: a href= http://www.mymic.rycote.com/producttypes/duck-raincover/. target= _blank http://www.mymic.rycote.com/producttypes/duck-raincover/./a I hope that helps!

Q: 8. How’s the rear and side rejection? Thx for your time in advance

A: Thank you for your question. This microphone features a Lobar/Supercardiod pattern for excellent rear and side rejection

Q: 9. will this fit a deity smic-2s?

A: Yes, that windshield would fit the Smic-2s. If you prefer the blimp # RY086072 would also be a good option.

Q: 10. Will the WJ-4 fur fit over this shield or is it a different fur windjammer system?

A: The designated windjammer for the Rycote Cyclone Windshield Kit (Medium) is the manufacturer part # 29102; B&H# RYCWJM.