Fsr Lp-Tbrt Low-Profile Hdmi Cable Retractor Yellow

Fsr Lp-tbrt Low-profile Hdmi Cable Retractor Yellow

Product Code: eq52138
Availability: In Stock

$836.85 $1,029.33

Qty

12 reviews Write a review

Description
Reviews (12)

The yellow FSR LP-TBRT Low-Profile HDMI Cable Retractor Yellowfrom FSR LP-TBRT Low-Profile HDMI Cable Retractor Yellowprovides power and connectivity when installed in a separately available Low Profile Table Box or HuddleVU Wall Box. Up to four low-profile cable retractors can be added per box. These slim-style retractors can also be mounted in a horizontal position under a table to save space and provide clearance for seating.

Tangle-Free Cable Management Hides & Protects Cables When Not in Use Simple Pull-and-Release System 6' Cable Pulls Out from Top of Retractor 6' Cable Exits from Rear of Retractor Compatible with Low-Profile Table Boxes Compatible with HuddleVU Wall Boxes Mount up to Four Retractors per Box Can Be Mounted Horizontally under Table Over 8000-Cycle Life

General
Compatibility	FSR
Inputs / Outputs
Connector 1	1x HDMI Male
Connector 2	1x HDMI Male
Physical
Color	Yellow
Cable Length	6' / 1.8 m (Top of Retractor) 5' / 1.5 m (Rear of Retractor)

Low-profile design maximizes under-table space

Stackable design

Retractor life greater than 8000 cycles

Convenient user access

6' cable pulls out from top of the retractor

5' cable exits from rear of the retractor under the table

Related Questions and Answers

Q: 1. Can you make this cable 36 inches long?

A: We do not offer a longer length of ths adapter. It may be connected to a 2' long XLR microphone cable for a total length of 38" Kopul Studio Elite 4000 Series XLR M to XLR F Microphone Cable (2', Black) BH #KOM4002: https://bhpho.to/3BkZOkP

Q: 2. It can connect to a camera with xlr inputs, correct? The description only lists recorders and mixers.

A: Yes the Rode Wireless GO to 3-Pin XLR Male Low-Profile Cable can connect to a camera with an XLR mic input.

Q: 3. Will this fit the mounting holes atop the Sony FX3/FX30?

A: The SmallRig Low-Profile NATO Rail (2.8") will fit onto the top of the FX3/FX30 but you may need longer screws.

Q: 4. Would there be any issue with using this to connect a Sennheiser G4 receiver to the input of Blackmagic Pocket 4K?

A: The Blackmagic Pocket 4K is not compatible with the Cable Techniques Mini TRS to TA3F Low-Profile Wireless Line Input Cable (18").

Q: 5. What is the diameter of the tie-down?

A: The Matthews Low-Profile Mitchell Tie-Down has a diameter of 3.5 inches.

Q: 6. What's the cold shoe adapter in the picture that's holding the Sennheiser AVX-ME2 in place? Seems like a useful piece for making this cable adapter work well.

A: Yes the shoe mount adapter included in the AVX system can be used to mount the receiver for the AVX system to a shoe piece on the Canon C70 and you can use the adapter BH #CATAX3FC7001 to connect it to the mic input on the Canon C70 camera.

Q: 7. Does this version of the Q Block have the protruding nubs for connecting multiple blocks together?

A: No, the Quasar Science Q Low-Profile Block (2-Pack) does not have the nubs to connect them together.

Q: 8. What is the max spread between the mounting screws?

A: Unfortunately, Smallrig does not provide this info. The SmallRig Low-Profile NATO Rail is 90mm long and the screws look like they can be positioned over most of the mount length. We did check and it should be about 57.5mm of space where you can position the screws.

Q: 9. Is this a balanced cable for use with the EW 500 Series?

A: Yes, the Cable Techniques Mini TRS to XLR Male Low-Profile Wireless Output Cable (18") would be a great choice for use as an output cable with the Sennheiser EK 500 Pro Wireless Camera-Mount Receiver.

Q: 10. Any idea what the max load is for this nato rail? I have it on top of my camera cage and I use it with a Nato top handle.

A: Max payload is not listed by the manufacture for this product, but if you tighten the screws provided with the nato rail to the cage, holding 10+ pounds should not be an issue.

Jared	04/09/2024
[1x HDMI Male] Simple and sleek. 5

Scott	03/08/2024
[1x HDMI Male] This is my second one. The first one lasted about 2 years, but I used it on many doc / field shoots in all types of climates. So I have to say, its a good cable! 5

Timothy	29/07/2024
[Yellow] It's heavy duty and easy to use. Definitely heavy so use caution. Was a great way to mount our 4K projector to an I-beam for our touring film festival. 5

Tim	28/07/2024
[1x HDMI Male] Perfect XLR extension cables for routing external microphone cables into your portable sound bag. Color coding makes keeping things straight pretty easy. 5

Mako	24/07/2024
[1x HDMI Male] Great looking, low profile cable. Not cheap, but what functional high quality product is? 5

Anies	05/07/2024
[1x HDMI Male] Good bit of kit. 5

CL	04/07/2024
[1x HDMI Male] I was wondering why this cable is so expensive, but I changed my mind once I held it. It inspires confidence for heavy duty use... will be coming back for more... 5

Craig	15/05/2024
[1x HDMI Male] Necessary for routing audio in a sound bag—but wish they were about half the price. Still, incredibly versatile because they can be adjusted to any angle on both ends. Cleaned up my bag nicely. 5

Jay	28/04/2024
[1x HDMI Male] This cable is perfect to go from my camera-mounted shotgun mic to the camera's XLR input. It stays out of the way better than any cable I've ever used on a camera and is very lightweight. 5

Bryan	26/04/2024
[1x HDMI Male] I bought 2 of these 10 inch cables to use with my Tascam X8 and a couple of external mics. The mics are mounted onto the X8 with a SmallRig shoe mounted mic clip. These cables work great with this setup since they are small, lightweight, and the adjustable angle lets. you set them up so they don't touch or rub up against each other. The sound and build quality is great too. I've taken these out in the field to many time to count. already and have had zero issues. I will be buying a couple more for sure. 5