Extend full-bandwidth HDMI 2.0 with HDR up to 132' over a single Cat 5 or better cable with the Gefen 4K Ultra HD HDBaseT Extender with HDR, IR & PoLfrom Gefen, supporting 18.2 Gb/s of data throughout and 600 MHz TMDS clock frequency. Featuring HDBaseT technology as well as Gefen's compression algorithms with high peak signal-to-noise ratio, this extender set accommodates resolutions up to 4K Cinema-DCI and 4K Ultra-HD with high dynamic range. HDR delivers greater contrast between light and dark areas of a video image, resulting in enhanced picture quality and color depth.

This extender set supports both HDCP 2.2 and HDCP 1.4 encryption, as well as 1080p full HD, WUXGA 1920 x 1200, 3DTV, and Deep Color at up to 1080p resolution. High-performance multichannel digital audio, including 7.1 channels of LPCM and HBR digital audio formats such as Dolby Atmos, Dolby TrueHD, DTS:X, and DTS-HD Master Audio, are passed through to the HDMI outputs. The GTB-UHD600-HBTL provides RS-232 and two-way IR extension between sender and receiver, facilitating the control of A/V sources placed near the sender and sending automation commands to the display or another device placed near the receiver.

Gefen's bidirectional PoL technology powers the sender or the receiver unit using the same cable that extends the HDMI signal. Only one of the two units needs to be fed by a power supply. This feature simplifies installation when no electrical outlets are available near the source or the display. Small and low-profile, the sender and receiver enclosures can be securely surface-mounted and hidden away from sight. They accommodate locking HDMI cables (included).

4K DCI & Ultra-HD HDMI Signal Extender    HDR for Image Quality & Color Depth    Transmits 4K DCI & Ultra-HD Up to 132'    1080p & WUXGA Up to 200'    PoL: Power Both Units with 1 PSU    Bidirectional IR Control    IR Emitter & Extender Included    HDCP-Compliant    18.2 Gb/s Bandwidth    Supports Dolby TrueHD & DTS-HD Audio

Supports 18.2 Gb/s bandwidth and 600 MHz TMDS clock

Extends HDMI & bidirectional IR over a single Cat 5e or Cat 6a cable

HDMI features supported:

• HDMI 2.0, full bandwidth to 18 Gb/s / 600 MHz
• HDR 10-bit color at 4K 60 Hz 4:2:0 and 4K 24 Hz 4:4:4
• HDCP 2.2 and 1.4
• 12-bit Deep Color at 1080p
• Uncompressed LPCM digital audio up to 7.1 channels
• HBR (High Bit Rate) digital audio up to 7.1 channels, including Dolby Atmos, Dolby TrueHD, DTS:X, and DTS-HD Master Audio
• 3DTV pass-through
• CEC pass-through
• Lip Sync pass-through

Supports the use of DVI sources and DVI displays up to 1080p Full HD and WUXGA (1920 x 1200), with Gefen CAB-DVI2HDMI-LCK DVI-to-HDMI cables (available separately)

IR extension from sender to receiver and from receiver to sender

Bidirectional PoL provides power to the sender or the receiver unit over the link cable—only one side needs external power

Uses Gefen's implementation of HDBaseT technology with proprietary algorithms and enhanced features

Advanced EDID management

Firmware updatable via external Gefen Syner-G port

Locking power connector

Surface mountable

Plug & play—no configuration or setup required for most applications

Compact sender and receiver enclosures are easy to install and can be hidden away

Related Questions and Answers

Q: 1. Will this work on a Mac mini?

A: If the Mac Mini has an HDMI output, it should work with this product.

Q: 2. Would this splitter take a direct signal from a Mackbook pro with USB-C out using the HDMI adapter?

A: Yes, that should be possible. Just as long as you have the adapter to convert the signal to HDMI, B&H # APMJ1K2AMA. https://bhpho.to/2AfUvaV

Q: 3. Can an output be connected from one unit to an input on a second identical unit?

A: While we are not sure of the application this would used for, that should be possible.

Q: 4. What would be a good hdmi audio extraction to digital optical audio unit that would match the specs of this switcher?

A: The KanexPro 4K HDMI Audio De-Embedder, B&H # KAHAECOAX3, has an Optical Output. https://bhpho.to/2IfZM3U

Q: 5. Does EXT-UHD600-41 support Dolby Vision?

A: According to Gefen it will support Dolby Vision, in Pass Through Mode.

Q: 6. Can this have it's EDID settings set to a frame rate of 23.98 at any of it's resolution settings?

A: We have not gotten any confirmation from Gefen regarding this. The device is made for EDID management. It can take most any popular resolution so we feel that the frame rate of 23.98 is accommodated as well. Here is the manual for more information.

Q: 7. Does it create seamless cuts or is there some delay resulting in lost of signal for a second?

A: There is no visible delay when you cut with this device.

Q: 8. Is this device a switcher or a splitter? I thought this was a one input, 8 output SPLITTER (signal duplicator), but I'm seeing confusing answers and reviews calling it a SWITCHER. Can someone clarify?

A: This product is a Splitter. It has 1 input and send out 8 outputs.

Q: 9. Will this work with Cat6e?

A: Manufacturer states that 5e and 6 are supported. 6e is not included on their specs.

Q: 10. What is the maximum HDMI cable length this device will transmit 4K video signals? I have 8K HDMI2.1 50ft cables. Thank you.

A: 50 feet is generally considered the maximum reliable length cap for 4k.