The Ross Video Detour 12G-SDI Relay Bypass 1x4 DAcan distribute a single 4K, HD, or SD-SDI input to four SDI outputs. A secondary failover input allows the Detour to be used in situations where a video feed cannot be disrupted. Put a second distribution amplifier before the Detour and your switching system, and you'll always have a signal reaching the output should your switcher go down. Ethernet control allows for networked configuration. The Detour can be almost used anywhere, as it can be powered off a USB connection.

Distribute 1 x 12G-SDI Input to 4 Out    Supports 12G/6G/3G/HD/SD-SDI    Secondary Failover Input    Ethernet Control    Manual/Automatic Input/Output Routing

Up to two independent channels of SDI distribution on one card

Equalization for SDI signals from 270 Mb/s to 12 Gb/s

Non-inverting outputs; works with DVB-ASI distribution

Auto or manual failover to secondary input

Control over Ethernet via Dashboard

Fault monitoring via USB or Ethernet

Native MADI support

Output routing support

Automatic detection of incoming data rate

Configurable as reclocking or equalizing-only

Power over USB or external 5V power supply with locking connector

LED indicators for signal presence and data rate for each channel

Related Questions and Answers

Q: 1. Does the power supply come included with this unit?

A: Yes, the power supply is included with this product.

Q: 2. What is the polarity for the lemo power connection?

A: This is a US standard 2-Pin LEMO plug. This means that the red dot side of the plug is positive voltage. As always, when using 3rd party accessories, check polarity before use.

Q: 3. Does it come with a lemo to P-Tap cable?

A: No, the Freakshow MSX2-L does not come with a lemo to P-tap cable.

Q: 4. How is this product in comparison to For-A HVS-100

A: This switcher offers 6 SDI Inputs and 3 HDMI Inputs along with 5 SDI outputs and 1 HDMI output, it has an Integrated Control Surface, Supports up to 1080p60 Video has a Full ME with 5 Keys a 10-Source Multiviewer and Multiple Layouts. The For.A HVS-100, B&H # FOHVS100TA, has 8 HD-SDI Inputs with 4 HD-SDI Outputs and 1 HDMI Output. It has Frame Synchronizers and a Re-Sizing Engine along with 2 Keyers and 2 DSKs. It also has Various Wipe Transitions and DVEs along with a MultiViewer that goes up to a 16 split. To support 1080p60 you will need to add an optional I/O card. https://bhpho.to/2Z6BUqv

Q: 5. Can you reccomend a proper lemo cable to use with BH #TIGAPPKV ? Preferrable short (1-3 feet max). Thanks. Being able to account for correct polarity is a concern.

A: Freakshow HD 4K 12G-SDI MSX2-L Microsplit Reclocking DA with Locking LEMO Power Connector comes with the correct Lemo power cable. If you need a replacement, please contact the manufacturer. info@freakshowhd.com

Q: 6. does it have a quad included?

A: Yes, this monitor does have quad view.

Q: 7. Do you still need to follow SDI protocol when powering on & off your camera when using this?

A: Regarding the Freakshow HD 4K 12G-SDI MSX2-O Microsplit Reclocking DA with Standard Freakshow Power Connector, the SDI protocol should always be used when connecting an SDI cable or device to a camera.

Q: 8. Is this rated for outdoor or barrel?

A: Canare does not list specifically if this cable is rated for outdoor use. However it offers copper foil and high-density tinned copper braided shielding along with highly-foamed multi-layer PE insulation. It is a high quality cable.

Q: 9. This might be an oblivious question, but does this splitter introduce any additional latency to the signal?

A: No, there is no latency from using the Freakshow HD 4K 12G-SDI MSX2-L Microsplit Reclocking DA with Locking LEMO Power Connector in your pipeline.

Q: 10. Can you play full videos from any of the media store and control them from the mixer surface?

A: The Media-Store of the Ross Video Carbonite Black Solo 1 M/E Live Production Video Switcher can be used with pre-stored graphics and animations, it is not designed for full videos.