Safely shut down computer systems and guard connected equipment from surges with the APC Back-UPS PRO BN1350M2 Battery Backup Surge Protectorfrom APC. The UPS is armed with a total of ten NEMA 5-15R outlets, with six providing surge and backup power and four designed for surge protection only. In the event of a power outage, the UPS comes equipped with an internal battery that delivers up to 810W of power. The battery-powered outlets provide up to 2.6 minutes of use at full load and up to 10.4 minutes at half power. For electrical spikes, the UPS has a 1080J surge energy rating. Other notable connections include coax and Ethernet ports for safeguarding video and network signals. There is also one USB Type-A port and one USB Type-C port that provide a total of 15W of power. Included along with the backup UPS is a USB cable, a coaxial cable, a USB power adapter, and a downloadable PowerChute software program to monitor energy usage and prevent data corruption by automatically saving files and shutting down a computer system.

Output: 810W / 1.35 kVA    Input: 120 VAC @ 60 Hz ± 3 Hz    10 x Total NEMA 5-15R Outlets    6 x Battery Backup & Surge Outlets    4 x Surge-Only Outlets    NEMA 5-15P Input Connection (6' Cord)    1080 Joules Surge Energy Rating    Recharge Time: 16 Hours    Step-Approximated Sine Waveform    $250,000 Lifetime Equipment Protection

• Warns when a battery is not available to provide backup power.

• Use your PC to access additional power protection and management features for your UPS via a USB Port.

• Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.

• Provides notification of changing utility power and UPS power conditions.

• Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

• Maximizes battery performance, life, and reliability through intelligent, precision charging.

• Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.

• Provides early-warning fault analysis on batteries enabling timely preventive maintenance.

• Provides temporary battery power when the utility power is out.

• Periodic battery self-test ensures early detection of a battery that needs to be replaced.

• Protect equipment with input transformer blocks without blocking access to other receptacles.

• Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

• Energy saving feature automatically powers off peripherals when the master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.

• Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.

• Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

• Increases UPS availability by allowing quick, easy battery replacement.

• Easy recovery from overloads; no need to replace a fuse.

• Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

• Provides protection of connected equipment from power surges on the data lines.

• Back up and protect your hardware and data during power outages, surges and spikes.

• Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

• Energy saving feature automatically powers off peripherals when the master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.

• Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment.

• Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.

• Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

Related Questions and Answers

Q: 1. Will this UPS work on its side? Or does it have to be in the upright position?

A: i would recommend to keep this unit up right so it doesn't over heat.

Q: 2. Does this have the usual piercing alarm when it switches to battery power? If so can you disarm the alarm? I don't just mean hit a silence button once it alarms but, can you set it so the alarm never goes off? I want to use it in a live production environment and wish to avoid the distraction of screaming alarms.

A: This unit BH #APBR1000MS has the option to mute audible alerts.

Q: 3. What are the dimensions and weight of the Pro BR 1000V?

A: Here are the Dimensions and weight for the Pro BR 1000V: Dimensions-10.24 x 3.94 x 14.49 /260 x 100 x 368 mmWeight - 22.49 lb / 10.2 kg

Q: 4. What is ther lifetime of the battery cartridge?

A: I agree with Luis N in that a UPS battery in these models have run us approximately 4 to 5 years. Once depleted, we typically just purchase a new one and have a local recycling vendor who obtains depleted ones from us at no charge.

Q: 5. What's the difference between APC's BN1350M2, BN1350VA and BR1350M2, please?

A: Thank you for your interest in our products. The BN1350M2 is the same model as the BN1350VA. The BN1350VA is just the family name for the BN1350M2. The BR1350MS is different from the BN1350M2 because the BR1350MS produces a pure sine wave both on and off battery. The BN1350M2 would have a pure sine wave while the UPS is online but when the UPS goes to battery it would be a step approximated sine wave. The BN1350M2 should work with most equipment but some equipment requires the pure sine wave both on and off battery like the BR1350MS produces.

Q: 6. does it works as a stabilizer too?

A: Yes, the APC Back-UPS Pro BR 1000VA Battery Backup & Surge Protector BH #APBR1000MS has AVR (Automatic Voltage Regulation).

Q: 7. Is it suitable for supplying the LED TV and Xbox Series X with power at the time of outages and regulating the current?

A: The APC Back-UPS BVK750M2 Battery Backup & Surge Protector BH #APBVK750M2 has a full load run time of less than 2 minutes.

Q: 8. Can you turn off the beep when power is lost?

A: The audio indicator cannot be disabled.

Q: 9. Does APC Back-UPS PRO BN1350M2 regulates output voltage? Could you please provide details?

A: The APC Back-UPS PRO BN1350M2 Battery Backup & Surge Protector BH #APBN1350M2 has a surge protector and outputs 120VAC.

Q: 10. I have pc tower and monitor only plugged into this backup. How many minutes coverage?

A: You would need to check your device specifications to calculate the load but it is rated to: Full-Load Runtime 1.6 Minutes (480W) Half-Load Runtime 9.8 Minutes (240W)