Dji Inspire 2 Hard Case For Cendence, Crystalsky, X7 Camera

Product Code: eq52920
Availability: In Stock

$2,907.00 $3,808.17

Qty

11 reviews Write a review

Description
Reviews (11)

The DJI Inspire 2 Hard Case for Cendence, CrystalSky, X7 Camerais a custom rolling hard case for your DJI Inspire 2 in "landing mode" with a Zenmuse X4, X5S, or X7 gimbal camera. Landing mode is designed for quick deployment by keeping the Zenmuse gimbal camera attached to the Inspire 2. The case also accommodates other essentials with slots for Cendence controllers, CrystalSky monitors, batteries, chargers, recording media, and more. The case itself is made from a durable polypropylene copolymer resin, and is gasket sealed to protect against moisture and dust ingress.

Holds Inspire 2 in Landing Mode Holds Zenmuse X4/X5S/X7 and 4 Lenses Holds up to 12 Flight Batteries Holds 2 CrystalSky Monitors or iPads Holds Inspire 2 Remote Controller Holds Second Controller, Cendence or I2 Holds 2 CrystalSky Batteries & 1 Charger Holds 2 Charging Hubs & 2 Chargers Holds 4 SSDs & CineSSD Station Holds a Set of Spare Propellers

Parameters
Military Specification	Waterproof and dust tight design (MIL-C-4150J / IP67) Ambient pressure equalization valve (MIL-STD-648C) Resistant to UV, solvents, corrosion, fungus (MIL-STD-810F) Resistant to impact damage (MIL-STD-810F)
Interior Dimensions	24 x 24 x 14" / 61 x 61 x 36 cm
Exterior Dimensions	27 x 27 x 16" / 69 x 69 x 41 cm
Weight	28 lb / 13 kg
Packaging Info
Package Weight	34 lb
Box Dimensions (LxWxH)	25 x 25 x 14.75"

Waterjet precision-cut with closed-cell foam to resist water and dust infiltration

Custom foam is housed in a durable SKB spec case

Wheels for easy transport

Padlock holes include stainless steel padlock-protector clips

Waterproof and dust-tight design

Molded-in hinge for added protection

Built-in pull-handle with one-finger lock release

Trigger-release latch system

Snap-down rubber over-molded cushion grip handle

Ambient pressure equalization valve

Resistant to UV, solvents, corrosion, fungus

Resistant to impact damage

1 DJI Inspire 2 in "Landing Mode" configuration
I2 controller
I2 controller or Cendence with patch antenna
12 batteries (2 on Inspire 2)
2 Charging Hubs
2 chargers with cables
1 camera box for Zenmuse X7, X5S, or X4
4 lenses for X7 or X5S
2 CrystalSky batteries
2 tablets (CrystalSky or iPad)
1 CrystalSky charger
4 SSDs for Inspire 2
1 CineSSD Station
Spare propellers
Calibration plate
Accessories
2 Cendence antennas
Documentation

Related Questions and Answers

Q: 1. Does the Cendence remote with Patch Antenna fit in this case?

A: Yes - perfectly

Q: 2. Does this hold the Inspire 2 in Landing mode or travel mode?

A: Landing mode.

Q: 3. How far away from each controller can operators be?

A: Maximum Communication Distance: 2.4 GHz: 492' / 150.0 m 5.8 GHz: 328' / 100.0 m

Q: 4. Will this accommodate a Cendance remote or Crystal Sky? How many Batteries?

A: This case will hold up to 6 batteries, and should accommodate the crystal sky monitor. I do not believe this case will accommodate the Cedence transmitter.

Q: 5. Is this a landing mode case and does it fit the X7 camera and gimbal installed with a lens?

A: Guess it should work. We are using the X5S and use the case according to your question.

Q: 6. If this is a landing mode case, does it hold the X7 still attached? With lens? Or without?

A: Yes the X7 with lens attached will fit.

Q: 7. What about the quad charger? Any room for that?

A: It might be squeexed in if you carry fewer batteries:Spots for 10 Spare BatteriesSpots for 2 Transmitters & 2 iPads

Q: 8. Will this case work with the Inspire 1 v 2.0 ?

A: No it will not.

Q: 9. What is the difference between the Landing Mode and Travel Mode case?

A: Landing mode allows your drones to be stored with the landing gears done, as if it were landing. Travel mode allows your drone to be stored with landing gears up for smaller storage. Landing mode case is larger than your travel mode case.

Q: 10. Can anyone who's purchased this case review it please?

A: While the HPRC Hard-Shell Wheeled Case for DJI Inspire 3 has no reviews, every other case by HPRC that has reviews, the reviews are 4-5 star. No reason to think this one any less quality.

Jimmy	07/09/2024
[28 lb / 13 kg] This case is by far the best Inspire 2 case on the market!! It fits like a glove and holds more of your precious gear than any other case out there. Im pretty sure its the ONLY case that fits the X7, Crystal Sky, Cendence Controller and 4 spots for your X5S or X7 lenses. LOOK NO FURTHER!!! 5

Alejandro	19/08/2024
[28 lb / 13 kg] Súper súper aerial camera. Dji the best brand in aéreos shotting. 5

Roberto Jose	08/08/2024
[34 lb] Very good quality and you cab put all you need ! 5

Daniel	02/08/2024
[28 lb / 13 kg] I have 2 of HPRC cases and they are built like tanks! When you invest thousands of dollars in the imaging equipment, its no brainer to invest in cases to transport and store the equipment in them. I have tried the drone case company but the quality and toughness weren't there. If you're looking for case to store your sensitive equipment, look no further! 5

John	21/07/2024
[34 lb] This case is awesome. It has room for everything you would need to take with you on an outing. Drone in landing mode, 2 remotes, 2 screens, 2 hub chargers, numerous batteries, props, cords, camera, and lenses. Its easy to tote around, and it has an extending handle so you can wheel it while standing straight up. It's well padded, and water tight. You name it, this thing has it. 5

Harrison	26/06/2024
[34 lb] This is the best case for traveling and local shoots with the Inspire 2. Has plenty of room for batteries, 2 chargers, Cendence controller with the patch antenna fits great. Can have the camera mounted to the drone for quick and easy shoots or store it in the camera box. 5

Carson	25/06/2024
[34 lb] Fits everything perfectly. This is actually my second GPC case for the inspire 2. I have one for work and one for my personal work. I bet the heck out of my first case and its still kickin. If you are on the fence about what inspire 2 case to buy I would choose GPC or Pelican! 5

CL	01/05/2024
[34 lb] This is a serious upgrade from the standard case that comes with an Inspire 2. You can fit much more in there and you have the benefit of a wheeled case. It's a bit bigger but worth it for sure. I have my X7 and all 4 lens, an extra set of blades, 6 battery slots plus 2 can be installed on the drone, slots for media sticks, my cedence controller with the extender fits with ease, the charging hub and cables, and the media reader all have slots that fit with ease. Well worth it to have everything with you in one case. 5

Tim	23/04/2024
[34 lb] I am using this case to protect a DJI Inspire 2. It has room to expand with extra batteries and could hold an extra charger and a couple of iPads. It also allows you to put the i2 in the case in landing mode with the camera attached. Simply take the blades off and put in the box. It is great for a quick set up and stowing. 5

Scott	09/04/2024
[34 lb] The X7 system is a giant step forward in aerial cinematography. There is a noticeable enhancement to the picture quality and sharpness due to the lens optics and larger sensor size. It's great to be able to change lenses to suite the shoot. You will notice your flight time will be shortened by 3-6 minutes due to the heavier payload of this camera system. I would also like to see a 100mm lens added to the lens set for natural history work. 5