With built-in ergonomic shoulder pad, 10" sliding track, extra space for accessories in front, VCT14-compatible V-wedge, red buttons and levers all around, and much more, this is the stylish Zacuto VCT Pro Baseplate Tripod Dock Kitfrom Zacuto. Use it with all types of cameras, from DSLRs to larger models, like the Alexa.

A section of the baseplate extends out beyond the 15mm LWS rod adapter in front. With the rod adapter thus set back, you have additional space to mount accessories under the camera lens, allowing you to position the camera further back on the plate, keeping the balance point of your rig directly over your shoulder. (The rod adapter is vertically adjustable 1", and has to be in a raised position to allow for accessories to be mounted in the additional space. Also, a 1.8" riser for the rod adapter is optionally available for RED cameras by special order from Zacuto.) Also, on the bottom of the section that protrudes out is where the V-wedge is. There is also a 15mm LWS rod adapter on the rear.

The VCT Pro Baseplate features a 10" sliding track, providing the space to optimally adjust balance after every lens change. Moreover, the included red camera plate can be loosened by a spring-loaded lever instead of a screw, so you can make adjustments quickly and easily. To fully release and remove the plate (and camera), just press a red button on the side of the baseplate and slide the plate out. The rod ports also have spring-loaded levers.

An ARRI M6 rosette is available on the front for attaching accessories and grips, and there are also three 1/4"-20 threaded holes on the side providing additional mounting options. 1/4"-20 and 3/8"-16 tripod mount holes are available on the bottom to use instead of the V-wedge. The shoulder pad runs pretty much along the entire length as well as width of the baseplate, and is made of gel polymer. Two 6.5" 15mm rods are included. One 1/4"-20 and one 3/8"-16 screw are supplied for the camera plate. The VCT Pro Baseplate is made in the USA.

VCT-Style Baseplate with 15mm Rods    Standard Tripod to VCT-14 Adapter Plate    Slide-In Dock Offers 2nd Tripod Mount    10" Camera Balance Range    Ample Space for Accessories and Balance    Large, Ergonomic Gel Shoulder Pad    Spring-Loaded Lever Plate Adjustment    Rod Adapter Adjusts 1" Vertically

• Front rod adapter is set far back, providing more space for accessories, and allowing the camera to be positioned further back for better balance
• 10" sliding track (with spring-loaded lever) for balance adjustment after lens changes
• VCT14-compatible V-wedge
• 1/4"-20 and 3/8"-16 tripod mount holes
• Ergonomic gel polymer shoulder pad
• 15mm LWS rod adapter on the rear
• Front rod adapter is vertically adjustable 1"; optional 1.8" riser available from Zacuto for RED cameras
• ARRI M6 rosette
• Three 1/4"-20 threaded holes for accessories
• Includes two 6.5" 15mm rods
• 1/4"-20 and 3/8"-16 screws supplied
• Made in the USA

Related Questions and Answers

Q: 1. Is zacuto VCT arri M6 rosette applicable to other site of plate? It was on older version

A: No. The Rosette mount is only on the right side of plate. The design of the Model of plate does not allow you to move/ or attach another rosette on the left side. You would have to attach a rosette system on the rails to accommodate rosette mounts for left and right connections.

Q: 2. Does the bottom of this rig have the VCT mount?

A: Yes, the Zacuto ACT Baseplate offers the availability to add a ACT mounting plate to your tripod to be able to quickly lock down your shoulder rig or roll cage. Please review the following item Zacuto ACT Mounting Plate BH #ZAZAMP • MFR #Z-AMP https://bhpho.to/3BxD1Fa

Q: 3. Is this compatible with the shape VCT Tripod plate?

A: Yes it is, you will be able to use this with any VCT Tripod Plate including the Shape Version. https://bhpho.to/2jBc0fq

Q: 4. Would this fit a FS5 or Fx6?

A: 100% Yes. one of the best VCT plates in the game meant for any serious working rig in production.

Q: 5. how heavy is the act base plate?

A: It weighs 2 pounds or 950 grams

Q: 6. Do the included 15mm rods have a female thread?

A: Yes it does, you can use the Zacuto 4.5" (11.43 cm) Male/ Female Rod Extension (Black) with the included rods, BH #ZAZBREFM45.

Q: 7. Does this attach directly to a tripod?

A: Yes. Besides being able to use the traditional ENG VCT plate, the VCT Pro Baseplate also has in the middle of the VCT wedge (on the bottom of the plate) one 1/4-20 thread and one 3/8-16 thread for attachment to video head quick release plates.

Q: 8. Will this work with a Sony F3?

A: Yes this is actually considered a Universal baseplate. You will just need a VCT mount for this. Mounts can attach to any tripod plate or you can mount the VCT directly onto a plate if you dont need the quick release action and can depend on what your tripod offers you.

Q: 9. What's the diff between VCT and ACT? Two answers here seem to conflate them; would like clarification. Thanks!

A: VCT and ACT are two different types of locking plate systems, where one (VCT) uses a v like wedge to lock into place, and the other (ACT) use the Arca-Type system. This Zacuto ACT Baseplate use the ACT system. The biggest difference other than the method in which the quick release is shaped is the speed at which the plate mount can be released, with VCT being a faster system more often used by professionals.

Q: 10. Is the small red sliding camera mounting plate compatible with arca type clamps such as the Kessler kwik?

A: The sliding camera plate is not arca type. However Zacuto offers the VCT Pro Tripod Doc, B&H # ZAZVCTPD, for this exact purpose. https://bhpho.to/2F3poO0