Capture super-stabilized gimbal shots from your car, ATV, boat, snowmobile, or other vehicle with the FLOWCINE Black Arm Dampening System with Mount & Casefrom FLOWCINE. Purely mechanical, this three-axis dampening and vibration-reduction system hard-mounts your gimbal-and-camera setup to your vehicle, stabilizing roll and tilt as well as vertical motion and vibration. The Black Arm's design incorporates a four-spring arm with fully adjustable actuator hydraulic dampers and a platform that levels the separately available gimbal. In addition, between the arm and the mounted gimbal there is an anti-vibration Tranquilizer mount capable of handling loads between 14.8 and 49.6 lb. Mounting the Black Arm is as simple as clamping it onto a standard 48-52mm speed rail.

The damping action of all three axes—vertical, tilt, and roll—is brought about by the hydraulic dampers. A 22-step knob enables you to precisely dial in the amount of damping you need for your shot. The Black Arm Complete ships with two dampers for each of the three axes. Also included is an extra-sturdy, wheeled all-black pro case with powder-coated metal corners, butterfly catches, and heavy-duty recessed handles.

Hard-Mounts Gimbal to Vehicle    For Car, ATV, Boat, Snowmobile, and More    Three-Axis Stabilization    Four-Spring Arm    Six Adjustable Hydraulic Dampers    22-Step Damping Knob    Tranquilizer Mount    14.8-49.6 lb Load Capacity    Clamps onto 48-52mm Speed Rail    Pro Flight Case

Related Questions and Answers

Q: 1. Has anyone tried to use the FLOWCINE Serene with a Flycam Flowline vest?

A: Yes I purchased be and it works great! It's rather difficult to install onto the easy rig though!

Q: 2. Will this work with the Easyrig 2 400 Support Bar?

A: Yes, this will work.

Q: 3. Will this fit on an Exovest?

A: We have not been able to test the Flowcine Tool with the Stedicam Exovest. Here is more info about the tool. https://bhpho.to/3Ba5fnQ

Q: 4. Could this be mounted to the EasyRig MiniMax?

A: According to FLOWCINE, this is to be used with the Easyrig 2/2.5/3 and Vario 4/5 support bars.

Q: 5. what is the dimensions of the base plate?

A: The dimensions of the base plate of the OC White B&H # OC52900B are 2 x 3.

Q: 6. How does the arm mount to your desk? I don't see any clamp mechanism typical of these arms.

A: This is meant to be a surface or wall mount. The base has four holes for screws so you can attach it to a wall, a ceiling, or a window sill.

Q: 7. Can someone share a photo of how they used a clamp instead of drilling holes in to the desk? Would love to see it successfully done and what material used to clamp.

A: The base plate of the 12" riser that is included with the O.C. White ProBroom Deluxe Mic Arm is designed to attach permanently to the desktop using four screws. To give you a better example of a stand with a riser that attaches using a clamp, check out the Auray BAE-2X Two-Section Broadcast Arm with External Springs & Integrated XLR Cable (B&H # AUBAE2X).

Q: 8. I have asked everywhere to find out how to use the lower swivel to extend the arm and not a single person has been able to answer that question. I can extend the top arm but cannot turn the lower swivel to extend the arm. Anyone able to help here?

A: Loosen the lower friction bolt and pull the lower arm towards you.If this does not offer a remedy, please contact O.C. White directly:O.C. White Company4226 Church StreetThorndike, MA 01079Phone: (413) 289-1751Fax: (413) 289-1754They also offer a Live Chat feature on their website: www.ocwhite dot com

Q: 9. Is this compatible with an Easyrig Minimax?

A: No it is not.

Q: 10. Does it come with a bungee cord as per manufacturer's page?

A: The Bungee Cord is not included with the FLOWCINE Small Hook for Serene Bungee Grip. The Bungee cord can be added as an optional part - https://bhpho.to/35zzJEq