You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Tascam Ml-16d Dante Analog Converter

Tascam Ml-16d Dante Analog Converter
  • Product Code: eq53231
  • Availability: In Stock

$5,997.00 $8,875.56

The TASCAM ML-16D Dante Analog Converterfrom TASCAM ML-16D Dante Analog Converteris a Dante-focused converter designed to insert or extract analog audio into or out of a Dante (Digital Audio Network Through Ethernet) network using external breakout devices that utilize D-Sub format connectors.

The Tascam ML-16D has two D-Sub inputs and two D-Sub outputs, that can be used to connect several devices that utilize D-Sub connectors such as microphone preamplifiers, console mixers, audio interfaces, amplifiers, and other audio devices.

Furthermore, the Dante protocol provides uncompressed, multi-channel, low-latency digital audio over a standard Ethernet network and supports up to 1024 channels of 32-bit / 192 kHz audio over a Cat 5/6 Ethernet system.

For External Audio, In or Out of Dante    16-Channel Inputs and Outputs    24-Bit, 48 kHz / 96 kHz Format    4x D-Sub Connectors    LED Display for Signal Levels

Key Specs
Channels of I/O16 Input / 16 Output
Maximum Sampling Rate96 kHz / 24-Bit
Number of Microphone InputsNo
Analog Audio I/O2x DB-25 25-Pin 8-Channel Input
2x DB-25 25-Pin 8-Channel Output
Digital Audio I/ONo
Host ConnectionNo
Parameters
Built-In DSPNo
Maximum Sampling Rate96 kHz / 24-Bit
Number of Microphone InputsNo
Built-In MicrophoneNo
Connectivity
Analog Audio I/O2x DB-25 25-Pin 8-Channel Input
2x DB-25 25-Pin 8-Channel Output
Digital Audio I/ONo
Host ConnectionNo
Host Connection ProtocolNo
USB (Non-Host)No
Sync I/ONo
Network I/O2x RJ45 Dante
MIDI I/ONo
Performance
Frequency Response20 Hz to 20 kHz +0.1/-0.5 dB (at 48 kHz, JEITA)
20 Hz to 40 kHz +0.1/-0.5 dB (at 96 kHz, JEITA)
ImpedanceDB-25 Inputs:
≥ 10 Kilohms
SNR113 dB
THD+N0.001%
Digital Audio
Sample Rates44.1 / 48 / 88.2 / 96 kHz
Sample Rate ConversionNo
Bit Depths16 / 24-Bit
Compatibility
OS CompatibilityWindows / macOS
Power
AC Input Power100 to 240 VAC, 50 / 60 Hz
Power Consumption22 W
Physical
Rackmount Size1 RU
Operating Conditions32 to 104°F / 0 to 40°C 
Dimensions19 x 12 x 1.8" / 483 x 303.8 x 45 mm
Weight7.7 lb / 3.5 kg
Packaging Info
Package Weight10.8 lb
Box Dimensions (LxWxH)21.5 x 16.9 x 5.9"

Dante-focused interface for connection of external audio in or out of a Dante audio network.

16-channel analog line input and 16 analog line outputs (48 kHz / 96 kHz) using 4 D-Sub connectors.

Dual redundant Ethernet jacks which support both primary and secondary connections.

Up to 24-bit / 96 kHz quality.

LED display for signal level and overload per input/output channel.

Reference level dip switches for selectable dBu level metering.

Firmware updatable via Dante port.

AES67 and Revenna compatible.

Related Questions and Answers

Q: 1. How many analog signals in the input and SDI outputs?

A: There is one input, and two SDI outputs.

Q: 2. Can you record at high speed from SD1 to SD2?

A: You can copy a file from SD1 and save it to SD2. No additional recording required.

Q: 3. Are the euroblocks unbalanced compatible?

A: No they are not: Connector Euroblock (Balanced) 3.81 mm Pitch

Q: 4. Can I use Dante AVIO 2-Channle Analog "Input" Adapter to connect legacy analog speakers?

A: This is not the correct Dante adapter to output audio signals from a Dante network into your speakers. Audinate Dante AVIO 2-Channel XLR Analog Output Adapter for Dante Audio Network, BH #AUADPDAOAU2 would be the appropriate Dante adapter. The ouput adapter's male XLR connectors would go into the input of your legacy speakers.

Q: 5. Does this AVIO support phantom power for a condenser mic?

A: This device does not support phantom power.

Q: 6. Is this rack compatible for mounting Tascam VS-R265?

A: Yes, Tascam specifies the Tascam 1-RU Rack-Mountable Shelf for Dante Compact Processor Series (AK-RS1) as a compatible option for mounting two Tascam VS-R265 units side by side.

Q: 7. Can the input version and output version of these units be used together as a standalone 2 channel dante system?

A: Yes you can, however you would need a switch as well.

Q: 8. I just bought this Analog to SDI,for Sony nxcam hxr-nx3/1 to BM ATEM. Can anyone help how to setup up?

A: Not much to set up. As I recall there are some switches on it to set as. I connected it and flipped the switches until I stumbled onto the right combination.

Q: 9. are all the pins supposed to be up ?

A: I am guessing you mean the DIP Switches. These switches would be set according to how you want to run this converter. Some of the settings include Analog or AES audio and channel selection. The switch settings are listed on the back of the unit.

Q: 10. Can you recommend a PoE injector to use with this adapter?

A: The Audinate Dante AVIO 1-Channel Analog Input Adapter for Dante Audio Network (BH # AUADPDAIAU1) may be powered by the TP-Link TL-POE150S Power Over Ethernet Injector B&H # TPTLPOE150S: https://bhpho.to/3NQ8lon.

21/09/2024

[2x RJ45 Dante] Most important - Easy and quick setup.

This is being used on a Midas M32. The AVIO uses 2 channels such as 7 & 8 that will need to be linked.

It does require Dante virtual soundcard for pc or mac and you will need Dante controller (free) for mapping the channels needed.

This requires POE.

5
11/09/2024

[2x RJ45 Dante] I was concerned that I wouldn't be able to configure this with my New M1 MacBook Air. Audiante said they would have support towards the end of 2021, not sure why the long delay as complicated apps like Adobe already have started their transition.

This adaptor is great for transmitting audio with zero perceptible latency over the network. You'll need a POE+ switch or power source, and your laptop must also be connected via ethernet since Dante doesn't work over WiFi.

5
26/08/2024

[16 / 24-Bit] I am using a these (along with Dante Via) to convert a relatively inexpensive set of active speakers into Dante enabled speakers.

Only con so far is that the AVIO adapter is larger than I expected, but definitely not a deal breaker.

Pros include near infinite (not really, some limit) speaker runs using Ethernet cable (also must have POE); no ground loop him (digital signal); and the AVIO device can serve as a Dante clock device.

5
22/07/2024

[1 RU] I had to set up music for an office X-mas party that spanned 3 floors and wanted to use the same audio signal simultaneously. I had not used Dante before. I set the transmitter and receivers up at home before the gig, using the free controller software. Everything connected and worked perfectly at home, then the next day at the job. Great solution!

5
21/07/2024

[0.001% ] Great recorder with the options I need for my location recording work. I own 2 of these because they are rock solid and easy to connect via my needs.

5
13/07/2024

[2x RJ45 Dante] The AVIO works just like you would imagine. Plug into the network, assign what you want in Dante Controller, and presto.
Really terrific tool to have whether you need to add a last minute speaker or just working on a quick project and only need two outputs.
10/10 would recommend to everyone.

5
12/07/2024

[10.8 lb] It's a great tool for your Dante network. It may even as clocking for your analog regarding your Dante network

5
15/06/2024

[96 kHz / 24-Bit] About the AVIO, no doubt, it makes our life easier.

But, I wanna say thank you to B&H, you are the best. Thanks for your help. Providing the service for us, far far away from your place. You make us to have the opportunity to get what we can not get in our country.

5
15/06/2024

[0.001% ] This thing works perfect. Hook it up to your network with POE, and it shows up in Dante Controller just like its supposed to, then works without another thought! Indicator lights by the RJ-45 are handy to be sure everything is working. Were using this with a POE injector, and there are no problems. Welcome to the future!

5
19/05/2024

[16 / 24-Bit] Used this for a balanced headphone amp off of the Dante network. Works great! Allows for two separate channels as stated. No issues.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Tascam Ml-32d Dante Analog Converter

$8,997.00 $12,235.92

Muxlab Dante 2-channel Analog Audio Encoder

$896.85 $1,255.59

Rdl Av-nl2 Dante Stereo D/a Converter

$1,292.94 $1,823.05

Muxlab Digital To Analog Audio Converter

$380.85 $601.74

Boss Gkc-da Digital Analog Converter

$599.97 $815.96

Products You May Like

Urth 105mm Uv Lens Filter Plus+

$372.00 $528.24

Roam Adventure Rugged Case Slate 105l

$1,077.00 $1,335.48

Skb Iseries 1510-6 Think Tank Divider Set

$194.97 $235.91

Custom Stainless Steel Xlr Wall Plate

$70.47 $99.36

Kensington Sd4810p Usb-c Triple Video Dock

$449.97 $553.46

Impact Luxbanx Medium Softbox 16x55"

$225.00 $339.75