Designed for servers, point-of-sale, routers, switches, hubs, and other network devices, the APC Smart-UPS Battery Backup Surge Protector SmartConnectfrom APC Smart-UPS Battery Backup Surge Protector SmartConnecthas a tower form factor and delivers intelligent and efficient network power protection from entry level to scalable runtime. It can provide 587 minutes of use at 50W, 339 minutes of use at 100W, 175 minutes of use at 200W, 113 minutes of use at 300W, 82 minutes of use at 400W, 63 minutes of use at 500W, 51.3 minutes of use at 600W, 42.4 minutes of use at 700W, 35.8 minutes of use at 800W, 30.8 minutes of use at 900W, 28.3 minutes of use at its half load of 960W, 26.8 minutes of use at 1000W, 20.8 minutes of use at 1000W, 16.7 minutes of use at 1400W, 13.6 minutes of use at 1600W, 11.2 minutes of use at 1800W, and 10.1 minutes at its full load of 1920W..

This Smart-UPS features an output of 1920W / 1920 VA, a NEMA 5-20P input connection, an input of 120V @ 50/60 Hz ±3 Hz, eight NEMA 5-15R battery backup outlets, two NEMA 5-20R battery backup outlets, a surge energy rating of 530 joules, line interactive topology, and a sine waveform. Included PowerChute Network Shutdown management software helps to provide unattended, yet proper shutdowns of network operating systems, and also included is an RS-232 cable and a USB cable. Support is provided by a limited 3-year repair or replace warranty that excludes the battery, as well as a limited 2-year battery warranty and a limited lifetime $150,000 equipment protection policy.

APC SmartConnect makes the Smart-UPS more adaptable and easier to deploy, enabling you to view the status of your UPS through a secure web portal. Through this remote management interface, you'll receive automatic notifications, firmware updates, and advanced support.

Open Box Products Have a Limited 3-Day Manufacturer Warranty (UPS Only)    Output: 1920W / 1920 VA    Input: 120 VAC @ 50/60 Hz ±3 Hz    8 x NEMA 5-15R Battery Backup Outlets    2 x NEMA 5-20R Battery Backup Outlets    530-Joule Surge Energy Rating    Recharge Time: up to 3 Hours    Line Interactive Topology    Sine Waveform    Cold-Start Capable    $150,000 Lifetime Equipment Protection

Provides temporary battery power when the utility power is out.

Provides actual kilowatt hours of usage for energy conscious users.

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Reduces utility costs, generates less heat.

Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with user-friendly navigation keys.

Dynamically provides the month and year when battery replacement is recommended to aide in long-term maintenance planning.

Simulates utility power to provide a high degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

Customize network shutdown and reboot sequences of connected servers and UPSs.

A single outlet group may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off, and non-critical load shedding.

Customize the UPS' capabilities with management cards.

Helps enables centralized management via StruxureWare Data Center Expert.

Related Questions and Answers

Q: 1. Is this unit manageable via network connectivity (RJ45)? Specification page says serial via RJ45 but nothing about remote management via network. Thanks.

A: It is possible that the use of the word "serial" throws off users but APC refers to the port as the APC SmartConnect port which is indeed the network port on the rear of the unit.

Q: 2. Hi, is this compatible with QNAP nas? I saw in a youtube video the SMT750i but does that mean that this should work too?

A: The APC Smart-UPS Battery Backup & Surge Pr tector with SmartConnect BH #APS3000RM2UC can be used with a NAS.

Q: 3. I just bought this and realized it came with a 30amp AC Plug. Can I safely adapt this to 15amp plug to use in a regular outlet? Will it just result in a slower battery charge?

A: Thank you for your interest in our products. If you do change the input power cord to 15 amp it will derate the UPS to a 1500VA UPS. It wouldn't slow charge but you would not be able to connect the same amount equipment to the UPS. We do recommend a licensed electrician change out the cord as well. For more information on this please check out the following knowledge base. https://www.apc.com/us/en/faqs/FA156517/

Q: 4. Can i start this unit without power it? (just with the rechanged battery)

A: The unit must be powered on in order to charge the battery.

Q: 5. Smart Card Compatibility: Is model fully compabile with: APC UPS Network Management Card 3 with 2 USB Ports and Temperature Monitoring, Newest Model 2020 (AP9641) ??

A: Thank you for your interest in our products. Yes the AP9641 will work in the SMT3000C.

Q: 6. I know it depends on how many things are pulling from it, but how many hours would this support a MacPro work station with a cinema display, a RAID 5, a 3-drive JBOD and a cable modem?

A: You can see which UPS is recommended for the load you want and the run time here: https://www.apc.com/shop/us/en/tools/ups_selector

Q: 7. Hello, I am considering purchasing this item. I understand that it can be connected to the Internet for enhanced functionality but since I do not have a good Internet connection where I reside can I use this UPS without connecting it to the Internet? Thank You Very Much. John

A: Yes you can as connecting the APC Smart-UPS X Battery Backup & Surge Protector with SmartConnect (BH #APSMX15RM2UC) to the Internet/network is not a requirement - it is optional.

Q: 8. Where can I see the backup duration this battery provides for the capacity listed?

A: Thank you for your interest in our products. You can check the runtime of the UPS by going to Status Estimated Runtime on the LCD display.

Q: 9. does this unit require additional card to send email, be accessible over internet: APC Dry Contact I/O SmartSlot Card ?

A: The APC Smart-UPS Battery Backup & Surge Protector with SmartConnect, B&H # APSMT2200C, has built-in internet connectivity for management. This unit is compatible with the APC Dry Contact I/O SmartSlot Card if you want to have more advanced option for monitoring and controlling the UPS.

Q: 10. Is the software that comes with this UPS fully compatible with OS X (Yosemite at least)?

A: There is no need to install software for the UPS when connecting to a Mac. You will be able to use the Macs Energy System Preference pane to control your systems responses when on battery power.