Designed for servers, point-of-sale, routers, switches, hubs, and other network devices, the APC Smart-UPS C Battery Backup Surge Protector SmartConnectfrom APC Smart-UPS C Battery Backup Surge Protector SmartConnecthas a tower form factor and delivers intelligent and efficient network power protection from entry level to scalable runtime. It can provide 146 minutes of use at 50W, 90 minutes of use at 100W, 49.2 minutes of use at 200W, 32.5 minutes of use at 300W, 23.5 minutes of use at 400W, 18 minutes of use at 500W, 14.2 minutes of use at 600W, 11.5 minutes of use at 700W, 9.4 minutes of use at 800W, and 7.8 minutes of use at 900W.

This Smart-UPS C features an output of 900W / 1440 VA, an input of 120V @ 50/60 Hz ±3 Hz, eight NEMA 5-15R battery backup outlets, a NEMA 5-15P input connection, a surge energy rating of 680 joules, line interactive topology, and a sine waveform. Included PowerChute Network Shutdown management software helps to provide unattended, yet proper shutdowns of network operating systems, and also included is a USB cable. Support is provided by a limited 2-year repair or replace warranty and a limited lifetime $150,000 equipment protection policy.

APC SmartConnect makes the Smart-UPS more adaptable and easier to deploy, enabling you to view the status of your UPS through a secure web portal. Through this remote management interface, you'll receive automatic notifications, firmware updates, and advanced support.

Output: 900W / 1440 VA    Input: 120V @ 50/60 Hz ±3 Hz    8 x NEMA 5-15R Battery Backup Outlets    NEMA 5-15P Input Connection (6' Cord)    680-Joule Surge Energy Rating    Recharge Time: up to 3 Hours    Line Interactive Topology    Sine Waveform    Cold-Start Capable    $150,000 Lifetime Equipment Protection

Provides temporary battery power when the utility power is out.

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Reduces utility costs, generates less heat.

Provides key UPS status at a glance. There are multiple status indicators with load and battery bar graphs.

Simulates utility power to provide a high degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

Related Questions and Answers

Q: 1. Where can I see the backup duration this battery provides for the capacity listed?

A: Thank you for your interest in our products. You can check the runtime of the UPS by going to Status Estimated Runtime on the LCD display.

Q: 2. I know it depends on how many things are pulling from it, but how many hours would this support a MacPro work station with a cinema display, a RAID 5, a 3-drive JBOD and a cable modem?

A: You can see which UPS is recommended for the load you want and the run time here: https://www.apc.com/shop/us/en/tools/ups_selector

Q: 3. Will this work on 15 amp?

A: Thank you for your inquiry. This would have a NEMA 5-20P plug on it. If you change the plug to a 15 amp plug then you would derating the UPS. You wouldn't get the full capacity out of the UPS and it would be rated for around 1,500VA. I apologize for any inconvenience this causes.

Q: 4. Is there an ethernet port in the base unit ? And does this ethernet port support basic remote communication?

A: Yes, the APC Smart-UPS Battery Backup & Surge Protector with SmartConnect, B&H # APSMT3000, comes with a SmartConnect Ethernet port. SmartConnect offers cloud-based remote power monitoring, UPS firmware upgrades, remote diagnostics and proactive email notifications with recommended actions.

Q: 5. can i control ports individually ?like scheduling shutdown for a device while keep the other running at different port?

A: The APC Smart-UPS C 1440VA with LCD does not support individually controlling the outlets.

Q: 6. How long does the battery last when the power cuts off?

A: Typical back-up and run time for 1/2 load is 11 minutes, at full load it is 4 minutes.

Q: 7. Does this condition the power? Would it replace the need for a Furman power conditioner?

A: This unit has a conditioner in it, but it would depend on the overall setup and how you were using the Furman.

Q: 8. Follow Up question on APC Smart Card "AP9641" & SMT3000C (and also SMT2200C): Do these units *already* have less capable cards that would need to be removed to make room to make room for AP9641 ? If so: What is the best model in this form factor and VA Capacity to buy, with the goal of deploying UPS with AP9641 card?

A: Thank you for your interest in our products. You would not need to remove any card to install the AP9641. The only thing you would need to remove is the blanking panel that covers the slot where the card is installed.

Q: 9. Will the SmartConnect feature function after the warranty has expired?

A: Yes, it will still function. The SmartConnect feature of the APC Smart-UPS C Battery Backup & Surge Protector with SmartConnect is built into the UPS itself and is not limited by the duration of the warranty.

Q: 10. Can i start this unit without power it? (just with the rechanged battery)

A: The unit must be powered on in order to charge the battery.