Designed for servers, point-of-sale, routers, switches, hubs, and other network devices, the APC Smart-UPS Battery Backup Surge Protector SmartConnectfrom APC Smart-UPS Battery Backup Surge Protector SmartConnectdelivers intelligent and efficient network power protection from entry level to scalable runtime. It can provide 395 minutes of use at 50W, 181 minutes of use at 100W, 99 minutes of use at 200W, 66 minutes of use at 300W, 49.1 minutes of use at 400W, 38.4 minutes of use at 500W, 31.2 minutes of use at 600W, 26 minutes of use at 700W, 22 minutes of use at 800W, 19 minutes of use at 900W, 16.5 minutes of use at 1000W, 12.9 minutes of use at 1200W, 10.3 minutes of use at 1400W, 8.3 minutes of use at 1600W, 6.8 minutes of use at 1800W, and 5.6 minutes of use at 2000W, 3.5 minutes of use at 2500W, and 2.8 minutes of use at its full load of 2700W.

This Smart-UPS features an output of 2700W / 2880 VA, an input of 120V @ 50/60 Hz ±3 Hz, six NEMA 5-15R and two NEMA 5-20R battery backup and surge outlets, a NEMA L5-30P input connection, a surge energy rating of 459 joules, line interactive topology, and a sine waveform. Included PowerChute Network Shutdown management software helps to provide unattended, yet proper shutdowns of network operating systems, and also included are rack-mounting support rails, rack-mounting hardware, an RS-232 cable, and a USB cable. Support is provided by a limited 3-year repair or replace warranty that excludes the battery, as well as a limited 2-year battery warranty and a limited lifetime $150,000 equipment protection policy.

APC SmartConnect makes the Smart-UPS more adaptable and easier to deploy, enabling you to view the status of your UPS through a secure web portal. Through this remote management interface, you'll receive automatic notifications, firmware updates, and advanced support.

Output: 2700W / 2880 VA    Input: 120V @ 50/60 Hz ±3 Hz    6 x NEMA 5-15R Battery Backup Outlets    2 x NEMA 5-20R Battery Backup Outlets    NEMA L5-30P Input Plug    459-Joule Surge Energy Rating    Recharge Time: up to 3 Hours    Line Interactive Topology, Sine Waveform    Automatic Voltage Regulation (AVR)    $150,000 Lifetime Equipment Protection

Provides the ability to adapt the UPS for improved performance in specific power environments or generator applications.

Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Provides notification of changing utility power and UPS power conditions.

Automatically starts up the connected equipment upon the return of utility power.

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Gives higher application availability by correcting low and high voltage conditions without using the battery.

Warns when a battery is not available to provide backup power.

Provides actual kilowatt hours of usage for energy conscious users.

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve higher operating efficiency without sacrificing protection.

Helps ensure clean, uninterrupted power to protected equipment while batteries are being replaced.

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with user-friendly navigation keys.

Provide easy-to-read status of the unit and utility power conditions.

Provides remote power management of the UPS over the network.

Turn on/off, reboot, or shut down select outlet groups to save dispatching technicians to remote locations.

Dynamically provides the month and year when battery replacement is recommended to aide in long-term maintenance planning.

Simulates utility power to provide a high degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

Customize network shutdown and reboot sequence of connected servers and UPSs.

Provides management of the UPS via a serial port.

Helps eliminate humming and heat generated when powering tubelights and fans.

Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off, and non-critical load shedding.

Enables centralized management via StruxureWare Data Center Expert.

Prolongs battery life by regulating the charge voltage according to battery temperature.

Provides management of the UPS via a USB port.

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries, thus reducing the Mean Time to Repair (MTTR).

Related Questions and Answers

Q: 1. I just bought this and realized it came with a 30amp AC Plug. Can I safely adapt this to 15amp plug to use in a regular outlet? Will it just result in a slower battery charge?

A: Thank you for your interest in our products. If you do change the input power cord to 15 amp it will derate the UPS to a 1500VA UPS. It wouldn't slow charge but you would not be able to connect the same amount equipment to the UPS. We do recommend a licensed electrician change out the cord as well. For more information on this please check out the following knowledge base. https://www.apc.com/us/en/faqs/FA156517/

Q: 2. how many hours of battery does this provide? when no electricity?

A: It will really depend on what you have plugged in. Please see the overview for a basic look at usage. You will need to calculate how much wattage all items being plugged in will pull for an hour and then calculate it from there.

Q: 3. Hello, I am considering purchasing this item. I understand that it can be connected to the Internet for enhanced functionality but since I do not have a good Internet connection where I reside can I use this UPS without connecting it to the Internet? Thank You Very Much. John

A: Yes you can as connecting the APC Smart-UPS X Battery Backup & Surge Protector with SmartConnect (BH #APSMX15RM2UC) to the Internet/network is not a requirement - it is optional.

Q: 4. Does the 600W/1000 VA version have a cooling fan?

A: The unit SMC1000-2UC has a fan.

Q: 5. Will the SmartConnect feature function after the warranty has expired?

A: Yes, it will still function. The SmartConnect feature of the APC Smart-UPS C Battery Backup & Surge Protector with SmartConnect is built into the UPS itself and is not limited by the duration of the warranty.

Q: 6. Are these TAA compliant?

A: Yes, APC Smart-UPS Battery Backup is TAA Compliant.

Q: 7. I want to hook up to survillence system to keep powered up when losing utility power. I assume this will do the trick?

A: Absolutely will be fine.Most surveillance systems draw very little power, and the near perfect sine-wave output is great for video equipment that would otherwise be susceptible to electronic noise (ie. spurious lines in the video, etc). However, this unit can only keep your surveillance system running for a limited amount of time, and you can determine the amount of time by visiting the APC website and using their UPS sizing tool to help determine about how much time your system will stay powered.And a sidenote... if you are using a PC-based system to record the surveillance data, then the amount of time will be substantially reduced due to the extra power needs of PC itself, so make sure that you include the wattage of the power supply in the PC when determining your power needs.If this 1440VA (about 1050watts) will only keep your PC-based surveillance system powered for about 10-mins, then you might want to consider a larger UPS unit, or one that can accept additional battery packs to extend the power timespan.

Q: 8. can i control ports individually ?like scheduling shutdown for a device while keep the other running at different port?

A: The APC Smart-UPS C 1440VA with LCD does not support individually controlling the outlets.

Q: 9. Smart Card Compatibility: Is model fully compabile with: APC UPS Network Management Card 3 with 2 USB Ports and Temperature Monitoring, Newest Model 2020 (AP9641) ??

A: Thank you for your interest in our products. Yes the AP9641 will work in the SMT3000C.

Q: 10. What is the battery connector on the back of the UPS for?

A: The port on the back marked battery is actually a disconnect, not a connector. It is recommended that you disconnect the battery during transportation, and this port provide a convenient way to do so.