Qsc E110 10" Two-Way Passive Loudspeaker Black

Qsc E110 10" Two-way Passive Loudspeaker Black

Product Code: eq53257
Availability: In Stock

$1,575.00 $2,346.75

Qty

7 reviews Write a review

Description
Reviews (7)

The black QSC E110 is a compact, two-way loudspeaker with a 10” die cast frame woofer with a 2.5” voice-coil, housed in a multi-purpose enclosure for stage monitor or main PA deployment. It incorporates QSC DMT (Directivity Matched Transition) design with an 85° wide coverage. When used as a stage monitor, the E110 loudspeaker is angled up at 55°, allowing it to be placed near the performer when used on a crowded stage.

An all metal, dual-angle, 35mm socket allows the loudspeaker to be mounted vertically on a pole or angled down by 10° to improve audience coverage and reduce rear wall reflections. Multiple mounting options using E-Series Yoke or M8 eyebolts (sold separately) are supported. Input connections include dual NL4 as well as screw terminal receptacles.

Like all speakers in the E-Series Entertainment System, the E110 is compatible with GXD, PLD amplifiers and TouchMix digital mixers, which afford advanced signal processing options to help fine-tune the performance of your speakers. The QSC E110 features a redesigned yoke for better mounting in permanent installations.

Open Box Products Have a Limited 3-Year Manufacturer Warranty For Live Stage, Theater, and DJ Setups 1 x 10" Woofer 1 x 1" Compression Driver Frequency Response: 68 Hz to 20 kHz Peak SPL: 126 dB 8 Ohms Connectors: 2 x NL4, 1 x Barrier Strip Dual-Angled Pole Cup Use as Floor Monitor or Main PA

PA Speaker
Configuration	Passive 2-Way
Total Power Capacity	300 W RMS 1200 W Peak
System Impedance	8 Ohms (Nominal)
Drivers
HF Driver	1 x Compression Driver with 1" / 25 mm Throat
HF Voice Coil	1.8" / 45 mm
LF Driver	1x 10" / 25.4 cm Woofer
LF Voice Coil	2.5" / 64 mm
Performance
Frequency Range	68 Hz to 20 kHz
Maximum SPL	126 dB
Coverage Angle	85° H x 85° V
Speaker Sensitivity	95 dB
Connectivity
Audio I/O	2x speakON NL4 1x Barrier Strip
Signal Processing
Crossover	1.8 kHz
Physical
Mounting	4 x M8 1 x 1.38" / 35 mm Pole Socket (Dual Angle)
Handles	1x Top
Construction Material	Perforated Metal Grille, Plywood
Dimensions	13 x 22 x 13" / 330 x 558.8 x 330.2 mm
Weight	44 lb / 20 kg
Packaging Info
Package Weight	46.85 lb
Box Dimensions (LxWxH)	26.2 x 17 x 16.8"

300W continuous, 1200W peak
E-Series Entertainment System offers advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers
Rugged tour-grade textured paint
Foam-lined perforated steel grille
Constructed of rugged plywood and coated in black, textured paint
Dual-angle pole socket

Related Questions and Answers

Q: 1. How do I connect those speakers to projector ( Optoma. Model number VDHDGU)?

A: You will need a stereo receiver to connect these speakers and for connecting your projector into.

Q: 2. does this speaker have an individual volume control?

A: Do I hook up 110 power from a outlet to this

Q: 3. Is this active or passive?

A: This is a passive speaker, and requires a powered signal from an amplifier.

Q: 4. What brackets are included?

A: No mounting brackets are included with the speakers. I used a couple of OmniMount wall and ceiling mounts to secure them to the ceiling. Be sure to locate a stud or joist to attach the base of the mount. The speaker is too heavy to attach just to the sheetrock. Search OmniMount 10.0 Wall and Ceiling Audio Mount. They're reasonably priced.

Q: 5. Are these speakers weather resistant? For outdoor?

A: No they are not weather resistant. Enclosure Characteristics: Ingress Protection: IP-44 Operating environment: Designed for indoor use Operating Temperature: -4 to 122°F (-20 to 50°C)

Q: 6. Is the Crown Audio XLS 1502 capable of driving two pairs of these 15" speakers? Is it a good choice of amp for this case?

A: The Crown Audio XLS 1502 is ideal for driving one pair of the CBR15 speakers.

Q: 7. Does this speaker have a 1.375 mounting hole for a tripod mount?

A: The JBL JRX225 Dual 15" Two-Way Sound-Reinforcement Loudspeaker System doesn't have any holes on the bottom for it to be mounted on a tripod/speaker stand.

Q: 8. Will 12 AWG speaker wire fit into the rear inputs? I have 60' run to the receiver hence the thicker gauge.

A: Yes you might have twist bare cables a few times but should fit.

Q: 9. Can you use them outdoor ?

A: These speakers are not outdoor rated.

Q: 10. Can several of these speakers (only 2 or more?) have their settings adjusted via the app? Can the settings be copied across?

A: The manufacturer has not stated how many TS410 2000W 10" 2-Way Active Loudspeaker with Bluetooth can be configured simultaneously via the app.

Wilson	06/09/2024
[68 Hz to 20 kHz] The sound is sweet and powerful. I am not disappointed with Yamaha's quality. 5

agar	19/08/2024
[1.8 kHz] Works great, mobile, sound good for basic events 5

skip	03/08/2024
[1x Top] We installed two of these in a large space, that honestly needed about three times that many cabinets for coverage. We knew they would have to run at a high volume to be effective and they were! We powered them with the QSC RMX 2450 amp. They were clean, strong and tight. The client was happy and of course, so were we! 5

Edmund	16/07/2024
[1x Top] I read the specs from Mackie so I figured that these speakers would work for what I tend to do sound reinforcement for. �The handle placement is ideal, especially when placing them on speaker stands and the sound coming out them filled a 75 by 100 ft meeting room nicely with very clean audio. �Yes I would recommend this product to a friend 5

Ken	25/06/2024
[46.85 lb] We are a church and needed speakers for outdoor events, parties, dancing, picnics for about 100 to 200 folks. I called a friend who happens to install home sound and video systems in high end homes, big dollar systems and asked him what I should get. He turned me on to QSC and narrowed it down to the CP12 series for our application. There were other speakers that did more stuff but my friend the audio expert said Get the tool that does the main job very well and not all the gingerbread, it will last a lot longer. I did and wow the speakers sound great!!! 5

Peter	17/05/2024
[Passive 2-Way] great sound,volume,light in weight.better than the 8.2 which kept breaking down... 5

Pete	21/04/2024
[1.8 kHz] I've had a pair of these for a few years now. They work very well as stage monitors. I use mine primarily as a monitor for my keyboards when performing. There is a multi-position switch that changes the EQ depending on the listening mode, but I usually leave it in Stage Monitor mode. Inputs are combination XLR / 1/4 TRS jacks. However, the daisy-chain connection to another monitor is XLR only - not 1/4 TRS, which is a pain in the neck sometimes. And the volume setting on the first monitor determines the maximum volume setting on any daisy-chained monitors. Overall, a very rugged monitor that has been dropped a few times and taken its share of abuse, but has never failed me. And it's a lot smaller and lighter than comparable stage wedges. To make sure I never lose the power cord, I have caribiners on the handle and the AC cord that I just snap together when transporting it. B&H occasionally has sales on these and also bundles (stand and XLR cable) - jump on those sales when available! 5