The 30" straight GyroVu D-Tap to Canon LP-E17 Dummy Battery 30"from GyroVu D-Tap to Canon LP-E17 Dummy Battery 30"connects a D-Tap battery or battery mount to a camera or accessory that can be powered with a Canon LP-E17 battery.

Connects D-Tap Battery to Camera/Monitor    30" Cable Length    4.5A Output Current    Built-In Emulator Chip    12-24V Input

Canon LPE17, EOS M3, M5, M6, Rebel SL2, T6i, Rebel T6s, Rebel T7i, EOS 77D, 760D, 750D, 800D, and KISS X8i digital cameras

Built-in emulator chip delivers battery status to camera indicator

Related Questions and Answers

Q: 1. Will this work with the BGH1? If no can you please suggest any v mount battery adapter solution for the bgh1? Thank you

A: Yes, this will work with the BGH1.

Q: 2. is the gyrovu cable coiled or straight?

A: Straight

Q: 3. Can this power an Atomos Ninja V?

A: I would not recommend using with Ninja V. I've used previously on Inferno - as soon as power draw increase (eg. when you start recording), you lose power altogether and monitor turns off.

Q: 4. does this come with a voltage meter to safely convert power? I want to plug it into a 14.8V DC source and don't want to fry my camera.

A: Yes, this product will safely convert the voltage for use with a Fuji X series camera.

Q: 5. Will this work with the canon m50? I need the battery door to be closed though.

A: The GyroVu D-Tap to Canon LP-E12 Dummy Battery (30") will work with the Canon M50, but it would require that the battery door remain open or be removed entirely. Unfortunately since the M50 doesn't have a power input, using a dummy battery and keeping the battery door open is the only way to power the camera with an external power source.

Q: 6. Will this work to power the Canon EOS RP via a USB power bank?

A: It should work providing that you will use power bank with 2amp USB output. Recommended power banks: GyroVu GV-PB-301 https://www.bhphotovideo.com/c/product/1551207-REG/gyrovu_gv_pb_301_high_power_30_000_mah.html?sts=pi&pim=Y and GyroVu GV-PBID-401 https://www.bhphotovideo.com/c/product/1551208-REG/gyrovu_gv_pbid_401_hi_capacity_40_000_mah.html

Q: 7. will i be able to use this for this?https://a href= http://www.bhphotovideo.com/c/product/1295726-REG/ifootage_electric_ray_e1_power.html target= _blank www.bhphotovideo.com/c/product/1295726-REG/ifootage_electric_ray_e1_power.html/a

A: At this time the iFootage Electric Ray E1 is set up for use only on specific Canon, Nikon and Sony cameras. Using it with the Lanparte LP-E17 is unknown and unsupported. Proceed at your own recognizance.

Q: 8. will this work with the Panasonic AG-AC160P? Thank you.

A: Yes, the GyroVu D-Tap to Panasonic AG-VBR59 Dummy Battery Cable (30") will support and power your Panasonic AG-AV160 from D-Tap power.

Q: 9. can I use this with an adapter to have endless power from a wall outlet? If so, what adapter should I buy.

A: This cable is designed to work specifically with the LanParte VBP-01 V-Mount Battery Pinch, BH #LAVBP01 which itself will work with V-Mount batteries. It is not for AC power, but a V-Mount battery will give you a much longer run time than your standard battery. Battery Pinch - https://bhpho.to/33MJeLs V-Mount Battery - https://bhpho.to/2WE411Z

Q: 10. What is the power input range from the D-tap source eg. 11-17v and will this power a Sony FS100?

A: This will accept the power range of whatever battery it can connect to. However, what is more important is the power output of the battery. The P-tap of the battery must nominally rated at the cameras battery rating of 7.2VDC. If you connect this to a 14.4 volt P-tap and then to the camera, you greatly risk damaging it.