Portabrace Backpack For Fujifilm X-T1, X-T2 Camera (Black)

Portabrace Backpack For Fujifilm X-t1, X-t2 Camera (black)

Product Code: eq53355
Availability: In Stock

$597.21 $770.40

Qty

21 reviews Write a review

Description
Reviews (21)

Store, transport, and protect your Fujifilm X-T1 / X-T2 and related accessories with the black PortaBrace Backpack for Fujifilm X-T1, X-T2 Camera (Black)from Porta Brace. The pack may be worn as a pack or sling bag, and has a spacious, zippered main compartment with padded, touch-fastening dividers for organizing gear. Photographers will appreciate the clear-vinyl pouch which allows their tablet to be used while protected. A variety of interior and exterior pockets provide convenient locations for accessories. And an exterior side pocket with an adjustable strap serves double-duty for holding a compact tripod or stand.

Carry the pack with the suede-leather top handle, or wear with the padded shoulder straps and connector. The back panel is padded for cushioning comfort, and the shoulder straps may be tucked away when not in use. 1000D Cordura nylon and 1" foam padding ensure good protection, durability, and strength. Included with the pack are touch-fastening dividers, storage pouch, white balance card, camcorder cinch, and a carabiner with flashlight.

Holds Fuji X-T1, X-T2 and Accessories Tablet Pouch with Clear Vinyl Cover Converts Between Sling and Backpack Padded Touch-Fastened Interior Dividers Tripod/Stand Pocket with Strap Padded Shoulder Straps with Connector Straps Tuck Away When Not in Use Suede Top Handle and Padded Back Panel 1" Foam and Soft Fabric Lining 1000D Cordura Nylon Construction

Key Specs
Color	Black
Carry/Transport Options	Backpack Straps with Sternum Strap, Handle, Sling Strap • Padded Strap: Yes
Type of Closure	Zipper
Interior Type	Adjustable Dividers (Hook & Loop)
Water Resistance	Water Resistant (Material)
Dimensions	Exterior 21 x 15 x 9.5" / 53.34 x 38.1 x 24.13 cm Interior 16 x 10 x 7.25" / 40.64 x 25.4 x 18.41 cm
Weight	4.2 lb / 1.91 kg (Backpack)
Parameters
Camera Compatibility	Universal
Carry/Transport Options	Backpack Straps with Sternum Strap, Handle, Sling Strap • Padded Strap: Yes
Type of Closure	Zipper
Interior Type	Adjustable Dividers (Hook & Loop)
Features
Bottle Pocket	No
Hydration Bladder Compatible	No
RFID-Blocking Pockets	No
Stand/Tripod Holder	Yes
Side Access	No
General
Water Resistance	Water Resistant (Material)
Padded Interior	Yes
Materials	Exterior: Cordura Interior: Nylon
Dimensions	Exterior 21 x 15 x 9.5" / 53.34 x 38.1 x 24.13 cm Interior 16 x 10 x 7.25" / 40.64 x 25.4 x 18.41 cm
Weight	4.2 lb / 1.91 kg (Backpack)
Packaging Info
Package Weight	5.65 lb
Box Dimensions (LxWxH)	21 x 10.5 x 10"

Thick padding and soft interior lining

Cinch system and tripod carrying pouch

Tablet pouch allows the tablet to be used while stored

Comfortable straps and suede leather handle for carrying

Can be used as backpack or slinger

Related Questions and Answers

Q: 1. will this item work with my fuji xt2?

A: Yes.

Q: 2. which camcorder is on an 11 picture? 12 is Canon C300. What is 11?

A: The camcorder in picture 11 is the Panasonic AF 100.

Q: 3. Is there any partition dividers inside ?

A: Yes, this PortaBrace Backpack comes with: 2 x Flexible Divider (7 x 13) 3 x Divider (7 x 3)

Q: 4. Will a laptop fit in this bag?

A: Depending on what additional items are stored with it, with interior dimensions of 16 x 10 x 7.25" then a laptop (depending on its dimensions) can easily fit, but no dedicated compartment is included on this particular bag.

Q: 5. Are the dimensions accurate/include pocket measurements? I need a bag for my "personal item" on Southwest, has to fit within 18.5"x13.5"x8.5"

A: The specs are provided by the MFR. You should have no problem.

Q: 6. will this fit an xt-20?

A: I do not think it will fit, however, there is a short video on you tube by Bjorn Sozumschein of an ocular adapter that may have been made by him. Look under T-T20 eyecup. Hope this helps.

Q: 7. Would this bag be OK for a black magic mini ursa? I'm looking for something I can travel with.

A: This will easily handle a built-up URSA Mini and will be very good for transport. One caution, this is only for your own back-packing or traveling in your vehicle. Do not check this bag with the camera in it for an airline trip.

Q: 8. is it water proof ?

A: It is water resistant, not completely water proof. It does not have water proof zippers, but although the case can’t be submerged in water it will handle a good amount of rain.

Q: 9. Will this fit a gfx50r?

A: I'm sorry, no, I don't believe there is a replacement eyecup for the 50R, the 50S, yes, but not the R.

Q: 10. Are any dividers provided with the bag?

A: Yes, it does come with a divider kit.

Vincent	22/09/2024
[Universal] The Kenko LCD Monitor Protection for the Fujifilm -T2 Camera is the best protection product that I have found. It not only fits the X-T2 but the X-T1 and X-T3 or any 3 inch monitor. It is well worth getting. 5

Innocent Bystander	14/09/2024
[Zipper] This is well thought out and engineered product. Great industrial design. Also, aesthetically pleasing, and it even makes the camera that it supports somehow more attractive. Easily attaches to tripod with appropriate connection. 5

Innocent Bystander	14/09/2024
[Zipper] This is well thought out and engineered product. Great industrial design. Also, aesthetically pleasing, and it even makes the camera that it supports somehow more attractive. Easily attaches to tripod with appropriate connection. 5

TRVphoto	11/09/2024
[Universal] Works perfectly as advertised! 5

Sarah f.	04/09/2024
[Universal] I purchased a RRS plate for my fuji x-t1 and it was a simple, beautifully manufactured attachment with a perfect fit. I now have the plate for my x-t2 and history repeated itself! 5

Kent	01/09/2024
[Universal] Excellent product and product support. Used in on my new X-T2 camera. Installs without air-bubbles. 5

Sabine K.	17/08/2024
[21 x 10.5 x 10"] The screen protector was very easy to install. Fits the X-T1 screen perfectly. 5

Faith	07/08/2024
[Yes] No issues installing this on my Fuji X-T1 5

Ted	25/07/2024
[Zipper] The rubber had to be trimmed at the square opening a bit in order not to confuse the camera from switching between evf to screen view. 5

Bernard	13/07/2024
[Zipper] The BXT2 base plate fits my Fuji XT2 perfectly. It has a magnetic slot to hold the Hex Key which is nice because you don't need to worry about keeping track of the Hex Key. It slides easily into the tripod, and has an additional screw mount for an older model tripod. There is a slot for easy battery access. There is no need to remove the base with general use. It looks very nice and balances the camera larger lenses such as the 18-135 and the 56 mm, and compliments it with smaller lenses like the 27 mm. It doesn't add uncomfortable weight to the camera. I am happy with the plate. And for those proud Americans - it's made in the USA. 5