Lectrosonics Sr Receivers Power Cable Bb-Hrs-Sr-24 (24")

Lectrosonics Sr Receivers Power Cable Bb-hrs-sr-24 (24")

Product Code: eq53490
Availability: In Stock

$126.00 $162.54

Qty

7 reviews Write a review

Description
Reviews (7)

The Lectrosonics SR Receivers Power Cable BB-HRS-SR-24 (24")is a power cable for compatible Lectrosonics SR receivers. It sports a Hirose 4-pin connector at one end and an RA locking coaxial connector at the other. The cable itself is 24" long, with a 5.5mm barrel diameter and a 2.1mm internal diameter. It utilizes 26 AWG wire with a flexible jacket.

1 x Hirose 4-Pin Connection 1 x Locking Coaxial Connection 24" Cable Length 26 AWG Wire For Lectrosonics SR Receivers

Parameters
Connectors	1 x Hirose 4-pin 1 x Coaxial (locking)
Barrel Diameter	0.2" / 5.5 mm
Internal Diameter	0.1" / 2.1 mm
Length	24.0" / 60.96 mm
Packaging Info
Package Weight	0.085 lb
Box Dimensions (LxWxH)	5.45 x 4.65 x 0.65"

For use with Lectrosonics Receivers paired with SREXT, SRBATTSLED, SMBATELIM, LRBATELIM powered by Battery Bud, or other powering devices with 4-pin Hirose connections.

Related Questions and Answers

Q: 1. Will this work on my Sony a6500? If I connect the Saramonic 500 B1 to the second channel of the Polsen MVP-3. https://www.bhphot

A: Yes! It does carry plug-in power to microphones.

Q: 2. I’m powering my 702 sound device Need 4pin Hirose x 5.5x2.5

A: This cable is meant for a Lectrosonics system. The cabling you require is dependent on what power source you are coming from. If using a BDS distribution system, here is a cable you could use: https://www.bhphotovideo.com/c/product/283346-REG/Remote_Audio_BDSCSQN_CSQN_BDS_Power_Output.html/specs If from a different power source, I would recommend calling in and speaking with a sales representative for the proper cabling.

Q: 3. Is this adapter cable compatible with any XLR microphone?

A: No . It is compatible withe listed Saramonic products.

Q: 4. Do you have it in block 23?Thank you Itamar

A: We offer block 23 receivers: Lectrosonics - SRb Camera Slot UHF Receiver (Block 23) - B&H# LESRB23 Product Highlights 588.800 - 607.900/614.100 - 614.300 MHz Dual Receiver Design Dual Channel SmartDiversity Reception Single Channel Ratio Diversity Reception LCD with RF Spectrum Scanner SmartSquelch for Noiseless Muting Automatic Power State Restoration DSP-Based Pilot Tone Squelch Rear Panel & Front Panel Audio Outputs Supports Transmitter Talkback Feature

Q: 5. Which pins are the tip, ring, and sleeve wired to, respectively?

A: Unfortunately Saramonic has not made a wiring diagram for the SR-UM10-C35XLR available.

Q: 6. How long is the Locking 3.5mm TRS to XLR-Male cable?

A: The cable is 16" long, minus the connectors. End to end, connector to connector it is approximately 21.25".

Q: 7. Will this send two discrete channels of audio if used with a Lectrosonics SRc5P Dual-Channel Slot-Mount ENG Receiver?

A: Yes.

Q: 8. Hi, Can use in the same time 2 x Rode Wireless Go (for both mono conectors) to record with Zoom H1 or H5 (for stereo conector)? I will get in my audio track from recorder both source (sound form both Rode Wireless go)? Thanks

A: We have not tested this arrangement, but it should work based on the cable's description and your desired deployment.

Q: 9. Will this power a lectrosonics src receiver?

A: Yes it will. But there is also a dedicated SR receiver battery sled that also has the audio output jacks on the bottom. Part number is SRBATTSLED. It comes in 2 versions, one for top and one for bottom of receiver mounting. a href= https://www.bhphotovideo.com/c/product/604141-REG/Lectrosonics_SRBATTSLEDBOTTOM_SRBATTSLEDBOTTOM_SR_Battery.html target= _blank https://www.bhphotovideo.com/c/product/604141-REG/Lectrosonics_SRBATTSLEDBOTTOM_SRBATTSLEDBOTTOM_SR_Battery.html/aa href= https://www.bhphotovideo.com/c/product/621589-REG/Lectrosonics_SRBATTSLEDTOP_SRBATTSLEDTOP_SR_Battery.html target= _blank https://www.bhphotovideo.com/c/product/621589-REG/Lectrosonics_SRBATTSLEDTOP_SRBATTSLEDTOP_SR_Battery.html/a

Q: 10. Is this wired for and will it work to power a smallhd ac7 from a Sony f5

A: I'm using this to power up my lectrosonics transmitter via battery bud with a NP-1 battery.If your F5 has an external power source and has a hirose plug for that job, than yeah ot should be able to power up a small ac7

CL	16/08/2024
[0.1" / 2.1 mm] While I wish the price was cheaper for this it does do its job very well and with no issues as all. Super easy installation and it just works as it should which is good for an accessory like this. It is useful and yet out of the way. 5

blestage	13/08/2024
[0.1" / 2.1 mm] I use this cable to power the Lectrosonics SRb receiver when attached to a professional camcorder. It provides a secure connection via the Lectrosonics locking connector, and the cables are cut to the perfect length to tap into most camcorders' accessory Hirose power taps. 5

anyonymous	02/08/2024
[0.085 lb] This unit has been around for years it is easy to use and sounds great. I don't use the sounds I use it to flog midi out to my Kurzwiel pc3x. It works great ether in general midi or custom notes to match any implementation 5

Charles	29/06/2024
[0.2" / 5.5 mm] Best Drum Machine i have ever had!! i would definitely recommend this!!! 5

Ross	27/06/2024
[0.1" / 2.1 mm] Great solution to quickly mounting an SRA/B receiver to a another camera. Built very well and up to Lectro quality. 5

Chris	21/06/2024
[0.1" / 2.1 mm] This is solid build, gets the job done, kinda wish it split in two or it was cheaper. 5

John	12/06/2024
[0.085 lb] This sled has breathed new life into our old Lectrosonics SR receiver now that we've moved away from ENG cameras with receiver slots. Works great, on board battery works well and can plug in to a d-tap. 5