Designed to support light to medium weight cameras, the Dot Line Ball Head 5/8" Receiver Light Standfrom Dot Line Ball Head 5/8" Receiver Light Standis a handy accessory that can turn your light stand into a tripod. Made of aluminum and stainless steel, the ball can be rotated 180 degrees and has a 90-degree notch in its wall for fast orientation into vertical or portrait mode. The head has a 5/8" (female) receiver that accepts a light stand's industry-standard 5/8" (male) stud. The head has a locking knob to secure the head to the stand, and an additional knob to adjust tension and lock the ball, as well as a 1/4"-20 camera screw.

Ball Platform with 1/4"-20 Camera Screw    Vertical Orientation Portrait Notch    5/8" Receiver for Standard Light Stand    Separate Ball-Locking Handle

Related Questions and Answers

Q: 1. What is the duration of the flash? In flash mode is the light turned on for 1/30th second for example, or is it shorter?

A: The flash sync speed duration of the Dot Line DL-RLF90 LED Continuous and Flash Ring Light is listed as 1/100th second.

Q: 2. Does anyone know the LxWxH of the unit itself?

A: I bought it in September! Its 1.5x3x5 and really powerful!

Q: 3. will the flash work on a fujifilm x100v?

A: The Dot Line DL-50M Manual Flash BH #DODL50M can be used with a x100v.

Q: 4. How long is it?

A: The Dot Line 43mm Strap (Black) is 37 inches.

Q: 5. Could this support a MacBook Pro on a tilting tray fastened to a 5/8" baby pin - 1/4-20 end screwed into a tripod?

A: While the CAMVATE Magic Arm Ball Head with 5/8" Light Stand Socket could receive the baby pin and the 1/4"-20 end could screw into a 1/4"-20 female thread on a tripod, a Macbook Pro and tray would likely be too heavy for this arm.

Q: 6. What is the guide number?

A: The Dot Line DL-RLF90 LED Continuous and Flash Ring Light is LED and most led lights are not rated in a guide number but in lumens or lux. Dot has this rated in Lux only and is 1000 Lux at 12.01".

Q: 7. How much does it weigh?

A: Unfortunately, we only have the weight of this item in the original packaging, which is 0.55 lbs.

Q: 8. Hello, I am looking to use my leica M lenses to shoot a film with my Sony a7s and metabones adaptor. Some of it will be shooting outdoors and I need to be able to put ND on these lenses in a way that that will be practical (i.e. not buying ND for each individual lens with a different filter thread size). I am wondering, with consideration to the very small size of these lenses, if this product will be a good purchase in order to use one ND filter set. I am wondering specifically about the lens cowl working well to reduce light leaks and reflections of the filter, as some have said it does not stay in place?Thanks!

A: Hello Joe. This product brings an adjustable cover to put between the lens and the Matte Box to block the light. The only problem I see. If the lens is not large, it difficult to manual focus. If you want to give me an e-mail to send you the photos from my lenses. So you take a better decision. Bye

Q: 9. Does this handle have a 1/4-20 thread on the bottom ?

A: Unfortunately no, the Dot Line SMARTbracket 7 Padded Handle does not have a 1/4-20 thread on the bottom. You could use this Revo handle instead. Please see the following link:http://bhpho.to/18ckMPH

Q: 10. Is there any "left/right" brightness adjustments or is the brightness always uniform (and flat)?

A: There is no left/right brightness adjustments