The Panasonic AU-EVA1 Hard Travel Case by Jason Casesfrom Panasonic AU-EVA1 Hard Travel Case by Jason Casesis a Pelican 1610 watertight, airtight, dustproof, chemical-resistant, and corrosion-proof hard case. The inside features a laser-cut high-grade foam insert to protect the equipment and keep it in place. It holds the Panasonic AU-EVA1 body with side and top handles attached, an LCD with mounting bracket, a microphone mount with mounting bracket, four batteries, a Panasonic charger, a Panasonic AC power adapter, and two Canon EF lenses. It also has six SD media slots, an 0945 Pelican case slot for additional media storage, and extra slots for charging cables and accessories.

This case is equipped with a tight-sealing polymer O-ring and an automatic valve that balances interior air pressure while keeping water out. The case's double-throw latches are easy to open, yet stay securely closed under impact or stress. Rubber overmolded handles, a retractable extension handle, and strong polyurethane wheels with stainless-steel bearings make for easy traveling with your camera.

For Panasonic AU-EVA1 Camera    Pelican 1610 Case    Laser-Cut Foam Insert    Watertight and Dustproof    Automatic Pressure Equalization Valve    Easy-Open Double-Throw Latches    Overmolded Rubber Haul Handles    Retractable Extension Handle    O-Ring Seal, Stainless-Steel Hardware    Two Built-In Wheels

Related Questions and Answers

Q: 1. Does anyone know the details of this case?

A: This is a new product so the details will be forthcoming. Meanwhile, you can get an idea of what the case will be like by looking at one of their other products such as this one. Jason Cases Hard Travel Case for Blackmagic URSA Mini Kit and Bottomplate B&H # JABMURMIDPL.

Q: 2. Is there any wiggle room for the C300 MKII if it has accessories attached like a wooden camera base plate and NATO side arm?

A: We contacted Jason Cases and they were not sure. In my experience such cut outs are based only on OEM gear.

Q: 3. Will this fit the new 12k version?

A: Yes it will.

Q: 4. Will this fit the iMac Pro?

A: Yes, the Jason Cases Case for Apple iMac 27 B&H # JAAPMAC27PL is compatible with the 2015 version, 2016 version, 2017 version, 2018 version, and iMac Pro.

Q: 5. Will this case fit a C300 MarkIII?

A: It will not. This case is for the C300 Mark II, not Mark III. Instead you would want BH #JACAC300K3CP which is the Jason Cases Canon C300 Mark III Case (Compact).

Q: 6. can it fit a 2020 27" iMac ?

A: Yes, the Jason Cases Travel Case for Apple iMac 27" / iMac Pro will fit a 27" 2020 iMac inside.

Q: 7. Does this case provide adequate protection for airline travel as a checked case?

A: Yes. The following case is made with high impact lab foam.

Q: 8. Will this fit in overhead compartment on board airline?

A: Yes it will. This product is made out of a Pelican 1510. The 1510 is a Carry-On sized case at 22 x 13.8 x 9 inches. While you will always want to double check with your airline, normal domestic Carry-On size is usually 22 x 14 x 9" for the overhead compartments.

Q: 9. Can I use a Sony VCB plate on this?

A: Hello Sean,Thank your for contacting us! If you mean a VCT plate, these camera supports are not designed for it really. We do have a perfect solution for the EVA 1 camera if you plan on using a VCT plate. We invite you to refer to our EVA 1 section on our website and look for our EVA1 BASEPLATE MATTEBOX FOLLOW FOCUS setup. a href= https://www.shapewlb.com/en/product/brands/panasonic-camera-supports/panasonic-au-eva1-supports/panasonic-au-eva1-baseplate-follow-focus-matte-box-kit_1027.aspx?id_page_parent=1139 target= _blank https://www.shapewlb.com/en/product/brands/panasonic-camera-supports/panasonic-au-eva1-supports/panasonic-au-eva1-baseplate-follow-focus-matte-box-kit_1027.aspx?id_page_parent=1139/aThis solution allows you to use a VCT plate without a problem. We hope this helps and we thank you for your interest in our products. The SHAPE team.

Q: 10. Will this case fit a C300 Mark 1?

A: There should be no issues, as the Canon C300 II is a little beefier than the I... However, the cutouts are designed specifically for the Mark II and its parts and may not provide the exact same snug fit that is intended.