Yelangu Handheld Dslr Camera Stabilizer Black

Product Code: eq54519
Availability: In Stock

$267.00 $336.42

Qty

8 reviews Write a review

Description
Reviews (8)

The black YELANGU Handheld DSLR Camera Stabilizer Blackis a mechanical stabilizer supporting cameras weighing up to 6.6 lb. When your DSLR or mirrorless camera is correctly aligned, the stabilizer can be used to isolate unwanted movements when operating the camera.

Attach your DSLR or other small camera to the quick release plate using either the 1/4"-20 or 3/8"-16 camera screw, then adjust the balance using the sliding plate and the counterweights. With practice, you'll be able to pan, tilt, and boom smoothly.

Lightweight 3-Axis, Mechanical Gimbal Supports Cameras up to 6.6 lb Telescoping, Carbon Fiber Center Post Sliding Quick Release Plate 6 x Counterweights 1/4"-20 & 3/8"-16 Screws Included Soft Case Included

Parameters
Stabilizer Type	Single-Grip Handheld
Load Capacity	6.61 lb / 3 kg
Camera Mount	1/4"-20 Male, 3/8"-16 Male, Quick Release
Height	15.16 to 23.62" / 38.5 to 60 cm
Number of Sections	2
Weight	3.31 lb / 1.5 kg
Counterweights	2x 7 oz / 200 g 4x 3.5 oz / 100 g
Material of Construction	Carbon Fiber
Packaging Info
Package Weight	4.55 lb
Box Dimensions (LxWxH)	16 x 9 x 4"

Related Questions and Answers

Q: 1. Is this compatible with a Panasonic lumix g7

A: We were unable to get confirmation from Yelangu in a timely manner nor can we test so we will say that we believe that a Panasonic Lumix G7 with it 1 lb of weight should be enough to work will with this stabilizer.

Q: 2. Can I use this with my Canon Powershot SX720?

A: Yes you can. This stabilizer supports cameras up to 6.6 pounds.

Q: 3. Can I use this with Sony Handycam FDR-AX33 18.9 MP Camcorder?

A: Im not sure about your specific camera. The highest weight it can hold is 7 lbs. it has a mounting plate with 2 different sized mounting screws. Im sure it could secure just about any camera (given that the camera falls into the correct weight category)

Q: 4. would a Pansonic AG-CX350 balance well on this unit? The weight is 4.19lbs, I assume the heavier the better it handles on stabilization?

A: This has a 6.6 pound load capacity, so it is possible. However we would tend to recommend something like the B&H # FLCMRK for a camcorder the size of the CX350. You will have better results with this we feel. https://bhpho.to/3m6Vw9a

Q: 5. Can I use with the Blackmagic Cinema Camera 2.5k (BMCC) and the Sigma 18-35mm?

A: The weight of the camera and the lens is 5.08 lbs / 2.3 kg. The YELANGU Handheld DSLR Camera Stabilizer (Blue) weight capacity is 6.6 lbs / 2.99 kg. You should be good. However, we would suggest you will get better performance with a heavier duty stabilizer such as this Glidecam XR-PRO Handheld Camera Stabilizer B&H # GLXRPRO with a weight capacity of 10 lbs / 4.5 kg.

Q: 6. I’ve been reading you need a heavier setup to be able to balance on these lower cost stabilizers, I shoot with a Sony a6000. Do you think I could still use it with this camera?

A: We are not aware of any minimum load capacity for this gimbal. It should be able to balance an A6000 well.

Q: 7. can i use with my Panasonic Lumix gh4?

A: Yes, this is designed to work with DSLR and Mirrorless style cameras. It has a load capacity up to 6.6 pounds. It should work well with the GH4.

Q: 8. Is the quick release included in the box?????

A: Yes, the quick release is in the box.

Q: 9. Can I use a manfrotto 501 plate (already on my cameras) on this stabilizer out of the box or do I need to buy a separate adapter plate?

A: That is not possible out of the box. However you can purchase the Manfrotto 577 Rapid Connect Adapter with Sliding Mounting Plate (501PL), B&H # MA577, to use the 501PL plate on this stabilizer. https://bhpho.to/2mRIakh

Q: 10. How well will this balance a Canon 5D Mk III with the 24-105mm lens?

A: It should balance that combination well. This stabilizer has a 6.6 pound load capacity, and the combination of 5D Mark III and 24-105mm is under 3.5 pounds.

Sal	26/08/2024
[16 x 9 x 4"] This is my first steadiacam purchase. I use it for my Canon 7D. If you're new to this, it will be very hard to balance. I had to watch like 3 different YouTube videos to figure it out. It takes a lot of practice. All in all, it works. Great product for a great price. 5 Star review! 5

Max	25/08/2024
[Carbon Fiber] This is quite a good steadicam for the price. Takes a while to get the hang of any steadicam and to balance your camera. Made my handheld shots a whole lot smoother. 5

Sheila	17/07/2024
[Carbon Fiber] Going in to this purchase I knew that there would be a learning curve using a camera stabilizer. I viewed many videos and read reviews on camera stabilizers from the GlideCams to much lower priced options. Just starting out a video production company so money is tight. The Yelangu stabilizer has a smooth axis rotation in all directions on the gimbal/ handle. Weights are adjustable on the base and the shaft has a quick release extend for counterbalance. I'm using a Nikon D7500 DSLR with an 18-55 lens. Whether you decide to get this one or something more expensive, do yourself a huge favor and watch videos on how to set up any stabilizer. I had it balanced in about 10 minutes, however, I had watched an hour or more of vids to learn. So far, I find it very smooth. You will need to master the duck walk and your body is part of the shock absorbing system. The camera rotates freely on the shaft so you will need to learn the feather touch to guide the camera. This would be true with an $800 GlideCam as well. Overall build quality seems solid however some of the plastic parts wouldn't hold up to abuse. The storage bag is lightweight and I expect the zipper to stop working, but no big deal since I have moved the stabilizer into a better case with storage for the extra weights. If you are someone who takes care of their gear, then this could be a great addition to your kit. 5

Jane	29/06/2024
[4.55 lb] Works very well and the quality is great considering the price. 5

Thomas	24/06/2024
[4.55 lb] The stabilizer is light and compact and works great with my mirrorless camera (sony a7iii). I would highly recommend this to anyone on a budget 5

Martin	06/06/2024
[16 x 9 x 4"] This is a really great price for this stabilizer. I previously owned a moza air cross 2 gimbal and didn't use it much due to how long it took to set up, the nonflexible movement of it and feeling rushed to film. This stabilizer looks and feels good in the hands. Definitely, recommend for a beginner to mid-level users. Even the Pros could get great use out of this stabilizer. 5

William	13/05/2024
[4.55 lb] This is a very good value for the money. Well made and very rugged. A minor issue is that it does not come with any assembly instructions or camera balancing instructions. I recommend looking at some on-line videos on balancing stabilizers. For a first time user of stabilizers the balancing process is not intuitive. Once properly balanced for a specific camera it works very well. 5