The Martin Professional Rush MH 10 Beam FX is a compact RGBW LED moving head with an independent, built-in LED ring, well suited for nightlife, houses of worship, cruise ships, and small-to-medium touring and rental customers.

Rush MH 10 Beam FX features a 60W Osram LED engine and a collimator lens design, which creates a striking, high-intensity look on stage and provides professional color mixing with other fixtures including the Martin MAC Aura, RUSH MH 6 and RUSH Par 2. The center ring utilizes 24 individually controllable RGB LEDs, which help the fixture to easily blend into onstage LED video elements. Additional features include continuous pan and tilt, as well as a lightweight build, providing a number of interesting rigging possibilities and high-speed looks.

For control options, the MH 10 Beam FX can be controlled via RMX, standalone, master/slave or via DMX with 24 or 93 channels modes. Standalone trigger options include music trigger and auto-trigger. The Martin Professional RUSH MH 10 Beam FX ships with a power cord and two omega brackets.

60W Osram RGBW LED Engine    Collimator Lens: Tight 4.5° Beam Angle    Glow Ring with Controllable RGB LEDs    Virtual Color Wheel: 33 Color Presets    Preprogrammed Effect: FX Macros    Electronic Dimming and Strobe    DMX Mode: 24 or 93 Channels    Standalone, DMX, Master/Slave, Trigger    Includes Power Cord    Two Omega Brackets

• Bright 60W Osram RGBW LED engine
• Collimator lens with tight 4.5° beam angle
• Ambient glow ring with 24 individually pixel-controllable RGB LEDs
• Electronic dimming and strobe
• Temperature-controlled fan cooling
• Unlimited pan and tilt rotating
• 3- & 5-pin XLR DMX connection
• Neutrik TRUE 1 in and thru socket

Related Questions and Answers

Q: 1. for the Eliminator Lighting Stryker Beam is there a recommended case for either 2 or 4 of these fixtures?

A: There are two cases recommended for the Eliminator Lighting Stryker Beam 13-Color LED Beam Moving Head. This one can hold up to four lights, https://bit.ly/3UjpStJ. And this one up to two, https://bit.ly/3O2GZvL.

Q: 2. How long will the battery last not in full power?

A: The battery is rated as 45 minutes in full power. It is not rated for run time at lower power.

Q: 3. Does the fixture have powercon input? I saw a youtube video of the fixture with a powercon input on it but the photo in the listing does not.

A: As per the user manual, this fixture uses an IEC connection rather than a PowerCon connection.

Q: 4. What accessory recommend you for mount this Chauvet DJ Spot in a grid high?

A: The Intimidator Spot has a Beam angle: 17°. You cannot attach a modifier to this light.

Q: 5. Is this the ILS model?

A: The CHAUVET DJ Intimidator Spot 160 LED Moving Head Light Fixture Kit with Bag (2-Pack) BH #CHINTMSPT16K is the ILS model.

Q: 6. I have a coast rechargeable HX5R flashlight, I need a new charging cord, where can I get one.?

A: The light takes a usb-a connection, click the link below to view the cable; https://www.bhphotovideo.com/c/product/836888-REG/Pearstone_usb3_amam6_USB_3_0_Type_A.html

Q: 7. Does this have USB?

A: The Yamaha MG10X (BH #YAMG10XCV) does not have a USB interface. The Yamaha MG10XU (BH #YAMG10XU) however, does.

Q: 8. Hi , this light can be set continuously rotate?

A: Yes, th ColorKey PartyLight FX Compact Tricolor LED Swirling-Beam Lighting Effect is able to rotate continuously.

Q: 9. how many lumens does this light put out?

A: The photometrics of American DJ VIZI CMY300 Hybrid LED Moving Head Fixture are: Zoomed In = Output 8053 lm, 7771K Zoom Out = 11329 lm, 7806K 50% Zoom = 11248 lm, 7782K - at distance of 3.3ft = Beam Center is 24 2547lux.

Q: 10. Are the 4 Mics input XLR?

A: Yes. The Yamaha MG10X 10-Input Mixer with Built-In FX has four XLR-1/4" combo jack inputs for channels 1 through 4 which will accept either XLR or 1/4" connectors and can be used for microphones or line level signal.