The Gator Titan Waterproof Case for Sennheiser EW Mic Systemis a durable hardshell case designed to hold a Sennheiser EW 100-ENG 3, EW 112-P G3, or EW 122-P G3 wireless microphone system for musicians and audio engineers in clubs, concert venues, and live stage applications. Made of impact-proof, lightweight NK-7 resin, it is ATA-300 certified for flight readiness. It boasts an IP67 rating and a Mil-STD-810F certification for protection against damage from water and dust, keeping your wireless system safe.

Internal cutouts and the 1" convoluted foam mounted in the lid enable secure placement of your system components. The Powerclaw latching system delivers closure and release with minimal effort. The soft-grip comfort handle offers an easy one-handed transport of the case, which is pad-lockable (padlocks available separately).

Holds One Wireless Microphone System    For Small Sennheiser EW Series    IP67-Rated for Water & Dust Protection    ATA-300 Certification    Easy-Release Powerclaw Latching System    Pad-Lockable    Impact-Proof Lightweight NK-7 Resin    Mil-STD-810F Immersion Test Certified    Soft-Grip Comfort Handle    1" Convoluted Foam in Lid

• Holds one Sennheiser EW 100-ENG 3, EW 112-P G3, or EW 122-P G3 wireless system
• IP67-rated for protection against damage from water and dust
• ATA-300 certification for flight readiness
• Powerclaw latching system is easy to open and close
• Pad-lockable (padlocks available separately)
• Impact-proof NK-7 resin is lightweight and durable
• Mil-STD-810F immersion test certified
• Soft-grip comfort handle allows ease of transport
• 1" convoluted foam in lid aids in keeping the contained components secure

Related Questions and Answers

Q: 1. Do Shure SLXD2 Handheld Wireless Mics fit holes of this Case ?

A: No, the SKB MC6 Waterproof Six Mic Case is made for compatibility with XLR connection wired handheld mics.

Q: 2. Will this work with a Shure ULXS system? Thanks.

A: Yes this Titan series case will fit a ULXS system.

Q: 3. Would this be appropriate for the XS Wireless 2 system? The cardboard box is not cutting it.

A: According to the specs of the XS Wireless 2 receiver, the iSeries Waterproof Case for Sennheiser EW 100/300/500 Series Wireless Combo Mic should be able to hold the XS Wireless 2 receiver, however there will be a bit of empty space as the receiver is smaller than the EW 100/300/500 series.

Q: 4. Does the H4N fits in this case? I want to buy this pack: https://a href= http://www.bhphotovideo.com/bnh/controller/home?O=cart_accessories&A=details&Q=&sku=1200980&is=REG&bundleId=1200980REG target= _blank www.bhphotovideo.com/bnh/controller/home?O=cart_accessories&A=details&Q=&sku=1200980&is=REG&bundleId=1200980REG/a

A: Yes I have this pack with the h4n and wireless mics in it.

Q: 5. Would this fit Shure SM7B mics?

A: The pre-cut foam insert is designed specifically to fit four of the Rode Podmic's, but you could adapt the case to accommodate the Shure SM7B microphones.

Q: 6. Can the pre-cut foam insert be purchased seperately?

A: No, the pre-cut foam insert is not available to purchase separately. However, it may be possible to get a replacement foam insert for an existing case through Gator Cases customer support.

Q: 7. Does the transmitter provide phantom power for mics like MKH 8050?

A: No. The Sennheiser EW-D SK Digital Wireless Bodypack Transmitter (R4-9: 552 to 607 MHz) will only supply a small amount of power for lavalier and headset microphones. It cannot supply 48V phantom power for larger condenser micrphones.

Q: 8. What are the dimensions of the rectangular cut-out? And how much "give" does the foam have? Would it stretch at all?

A: The dimensions of the rectangular cut-out accessory compartment inside of the Gator Titan Series Case for Shure SM7B Microphone and Cable are 6.3 x 4.1 x 3.3" (16 x 10.4 x 8.3 cm) for length x width x height. The foam does have a very small amount of stretch but I recommend staying within the specified dimensions.

Q: 9. I want to mic a maximum of 12 performers with EW D. Do I need a variety of frequency bands? (4 each to cover 470 -600Mhz?)

A: You will be able to have a maximum of 90 transmitters per band, so if there is not significant interference in your area it should be alright to keep the same band for all systems.

Q: 10. will the rodecaster fit in the case with a decksaver cover ?

A: We have not tested this case with a Decksaver, but it appears that the Decksaver is going to add about 1/4" to the overall height, so it will be tight, but the pyramid foam in the top of the case is quite pliable, so although snug, it should fit.