Power your URSA/URSA Mini and accessories from a compact brick battery with the IndiPRO Tools Micro-Series 98Wh Battery Blackmagic URSA Kitfrom IndiPRO Tools. The kit includes the Micro-Series 98Wh Gold mount Li-ion battery, a Gold mount adapter plate for the URSA and URSA Mini, and the portable D-Tap pro battery charger that plugs into an AC wall outlet to charge the battery.

The Micro-Series 98Wh battery outputs 14.8 VDC and has a 6.8Ah capacity with power draws up to 12A. It also offers D-Tap and USB outputs for simultaneously powering accessories or mobile devices along with your camera, and provides a 5-LED power gauge for monitoring remaining battery life.

98Wh Lithium-Ion Gold Mount Battery    Gold Mount Adapter Plate    Portable D-Tap Pro Battery Charger    D-Tap & USB Accessory Power Outlets    Battery Supports Max Power Draw of 12A

• Integrated D-Tap and USB accessory power outlets
• The battery supports a maximum power draw of 12A
• Gold mount battery plate for Blackmagic URSA/URSA Mini
• D-Tap pro battery charger delivers 16.8V and 2.5A; charges a 95Wh battery in approximately 3 hours

Related Questions and Answers

Q: 1. How long could this battery power a Canon C300 Mk II?

A: We expect these batteries to last about 3 1/2 to 4/1/2 hours of shooting on the C300 Mark II, all depends on the added accessories and shooting speed.

Q: 2. Will this product work for a Arri SR2?

A: Yes these batteries can power the Arri SR2

Q: 3. Is the v mount plate proprietary? If I have another v mount battery can I use it with this adapter?

A: The V mount is not proprietary and can be used with other v mount batteries.

Q: 4. Can I use the charger to power the FX9 via 4pin XLR with the Movcam Distributor Box for Sony FX9?

A: Yes, powering the Sony FX9 with the 4 pin XLR and the Movwecam Distributor Box for Sony FX9 will work.

Q: 5. At what voltage will these batteries automatically turn off?

A: It all depends on what you are trying to power. We recently did a test, at a full 6amp draw the battery lasted about 70 minutes before it hit 13v at which point the battery shut off. We hope this comparison helps with your question.

Q: 6. Does this battery worknwith the new Canon R5 C? If so, about how much time will it last? The normal LP-E6NH last 30 to 45 min in video mode.

A: Yes, it's possible to use a large battery with a D-Tap (or P-Tap) power port such as the IndiPRO Tools Micro-Series V-Mount Li-Ion Battery (98Wh) (B&H# INVMP98S) with the Canon EOS R5 C Mirrorless Cinema Camera (B&H# CAER5C). The battery itself would need to be mounted somewhere else such as on a battery plate attached to a rod system since it is much too large to fit into the battery compartment of the camera. You would then connect a cable such as the Anton Bauer P-Tap to Canon 9V Barrel Cable (20") (B&H# ANPC9RBSC) to a DC coupler such as the Canon DR-E6C DC Coupler for EOS R5 C (B&H# CADRE6C) which would go in the battery compartment of the R5 C. It would last for hours of use.

Q: 7. Will this work with the canon c300miii with the tilta v mount plate?

A: Yes, the IndiPro Tools Micro 98Wh battery is a V-mount battery and will mount onto the Tilta V Mount Plate for the Canon C300 Mark III.

Q: 8. *how long will the 270s last with the p300c at full power?

A: Indipro Tools states that the IndiPRO Tools Micro-Series V-Mount Li-Ion Battery (270Wh) offers an estimated time of 1 hour and 35 minutes using full power on the Aputure Nova P300c RGB LED Light Panel.

Q: 9. Will this battery work for powering a Blackmagic Design Pocket Cinema Camera 6K?

A: Yes, this IndiPRO Tools 2 x Micro-Series 98Wh Li-Ion V-Mount Batteries with Dual V-Mount Battery Charger Kit, would work with powering a Blackmagic Design Pocket Cinema Camera 6K.

Q: 10. Does this charger work with 100V and 240V outlet?

A: All available references point to a performance of 110v to 240v. We haven't come across any that confirm the 100v marker.