The Triad-Orbit Starbird SB-1 Studio Boom Standis the third iteration of George Starbird's legendary Model No.180 studio boom stand, which was designed for use in large broadcast environments in the 1940s and later adopted as the large mic stand of choice by recording studios. This updated version combines the unrivaled reach, range of motion, and stability of the original with Triad-Orbit's proprietary technology to impart new levels of performance, versatility, and stability.

Legendary Starbird Model 180 Boom Stand    Boom Arm Telescopes from 55 to 98"    Stand Height Range: 63 to 102"    Heavy Cast Iron Base    T.A.F. Pneumatic Auto-Lift System    VariBal Counter Ballast System    Three Retractable Legs    BoomStop Safety Lock    Large Triad TC Studio Casters    Aluminum Construction

• Third iteration of George Starbird’s legendary Model No.180 studio boom stand
• Large Triad TC industrial-grade, dual-bearing, dual-locking studio casters
• Thick 2mm 6063 T5 aluminum tubes
• Strong main swivel uses tested technology from the Orbit 2 center swivel
• Safety Stop Spring pin system
• Compatible with Triad-Orbit IO Quick-Change and includes the OA ball joint for 360° of mic adjustment
• Stand base, boom swivel, and clutch components retrofit to legacy Starbird stands

• T.A.F. (Triad Air Force) is a patent-pending pneumatic auto-lift / assisted-lift system that automatically and effortlessly raises T-O Starbird stands and booms
• Ideal for applications with heavy microphone set ups
• By releasing the mid clutch on the riser tubes the stand raises automatically with air-lift assist

• Massive cast iron base with 38" footprint and three retractable legs that pivot for optimum positioning
• Legs tuck away under the base for efficient storage
• The legs can be used in offset positions to accommodate smaller rooms and tight spaces

• Pin locking mechanism secures Starbird boom in any position, regardless of the weight suspended, for safe, worry-free operation

• VariBal lets you adjust the position of the counterweight effortlessly
• Allows you to add additional ballast to the counterweight as needed

Related Questions and Answers

Q: 1. Does this ballast bag come empty? I'd like to be able to travel with it empty.

A: The bags are shipped full.

Q: 2. What is the load capacity of the T2 tripod?

A: Dear Chris,Thank you for your inquiry. Our Triad stands are rated to hold up to 35lbs (16kgs) before the top tube may start to lower. However, depending on how much you tighten the top clutch, you may see a lower or higher capacity. I hope that this answers your question, but if it doesn't, please let me know and we will find the right solution.Sincerely,Richard CarriganTriad-Orbit Support Teama href= http://www.Triad-Orbit.com target= _blank www.Triad-Orbit.com/a

Q: 3. Will this support a 10 pound monitor?

A: Yes. It is rated for a load of up to 30 lbs.

Q: 4. What is the folded length?

A: The stand is 44-inches when folded up, but the boom portion is 82-inches. If you are looking for a more mobile option that collapses to a smaller size, you may consider the Impact Multiboom Light Stand and Reflector Holder (13'), BH #IMLSRH. This light stand is only 40-inches when folded up, and can be used as a mic boom, with the addition of a thread adapter, such as the Impact Female 1/4"-20 to Male 3/8"-16 Thread Adapter, BH #IMCA109.

Q: 5. Collapsed/disassembled length?

A: While the manufacturer does not specify the collapsed length of the boom arm, we would estimate around 19'' based on maximum length photos from their website.

Q: 6. What is the load capacity of the Orbit boom?

A: Dear Chris,Thank you for your inquiry. Our Orbit booms are rated to hold up to 4lbs (2kgs) on each arm, with the boom arm fully extended and parallel with the ground, before it may start to lower. However, depending on how far you extend the extension tube and the angle that you position the arms, you may see a lower or higher capacity. I hope that this answers your question, but if it doesn't, please let me know and we will find the right solution.Sincerely,Richard CarriganTriad-Orbit Support Teama href= http://www.Triad-Orbit.com target= _blank www.Triad-Orbit.com/a

Q: 7. Can you attach a Rode VideoMic NTG or would you need an adapter?

A: The On-Stage SB9600 Tripod Studio Boom Stand (B&H # ONSB9600) can accommodate the RODE VideoMic NTG Hybrid Analog/USB Camera-Mount Shotgun Microphone (B&H # ROVMNTG). However, an adapter for the RODE's 3/8"-16 female thread mount would be necessary: Auray AD-5838-B 5/8"-27 Female to 3/8"-16 Male Mic Stand Adapter, B&H # AUAD5838B (https://bhpho.to/3xyLPfm)

Q: 8. What's the maximum height of the stand itself, not the boom pole?

A: The maximum height of the On-Stage SB9600 base is 80", and the boom extends to 89", so the maximum elevation of anything mounted on the stand should be close to 165" with more reach available with the 7" boom extension. Due to the shape of the stand, maximum mounting height would depend on the boom angle and how you manage to balance your microphone, but that would be a rough estimate for a best-case scenario.

Q: 9. Is this stand collapsible? Does it come with a bag to transport it?

A: Yes, the stand is collapsible to 53.8". It does not included a bag for transporting it. You could use the Ultimate Support Bag-99D Heavy-Duty Padded Tote Bag - for Two TS-99 or TS-88 Speaker Stands (B&H # ULBAG99D) which has interior dimensions of 14.5 x 60.5". That should give you enough space for the wheels and cables too.

Q: 10. What kind of adapter do you need to attach a Rode NTG3 shotgun mic?

A: You can use a shock mount like the Rycote INV-7 InVision Microphone Suspension for Stand and Boompole Mounting (B&H # RYINV7) to mount the Rode NTG3. The shock mount has a 3/8" thread (for boompoles and light stands) while the On-Stage mic stand has a 5/8" thread (standard size for US style microphone stands), so you will need to use a thread adapter like the Auray AD-5838-B 5/8"-27 Female to 3/8"-16 Male Mic Stand Adapter (B&H # AUAD5838B). This setup will do the job well.