Auralex ProPanel Acoustical Wall Panel Red SonoSuedeare high-quality, SonoSuede covered absorptive panels designed to reduce unwanted room reflections, slap and flutter echoes and provide a more pleasing and accurate listening environment. ProPanels have a fiberglass core with chemically-hardened edges and this 2"-thick ProPanel has a 1.05 NRC and is most effective absorbing frequencies at 250Hz and above. This panel measures 48 x 24 x 2" and has a beveled edge design.

All Auralex ProPanels provide professional, aesthetically-pleasing acoustic treatment in any facility. All ProPanels meet the Class A Fire Rating per ASTM E-84, making them the a perfect choice for use in areas with strict fire codes. Standard wall mounting hardware is included with all panels for easy installation.

Reduce Unwanted Room Reflections    Tame Chaotic Reverberation    NRC Rating of 1.05    Class A Fire Rating per ASTM E-84

Related Questions and Answers

Q: 1. Will it be flat against the wall when pushed all the way back?

A: The Gabor TM-SM Tilting Wall Mount for 30 to 50" Flat-Panel Displays (B&H # GATMSM) will have a distance from the mounting surface of 2.1" / 5.33 cm. See the manual here: https://www.bhphotovideo.com/lit_files/576230.pdf.

Q: 2. What's the height between the holes on the wall plate?

A: These dimensions ae not published for the Gabor TM-SL Tilting Wall Mount for 50 to 70" Flat-Panel Displays BH #GATMSL

Q: 3. Can I use the Gabor TM-UL Tilting Wall Mount with an LG OLED55G2 TV, which weighs 38 pounds?

A: Yes, the Gabor TM-UL Tilting Wall Mount for 42 to 90" Flat-Panel Displays can be used with the LG G2 TV series, which has a 300 x 200mm VESA mounting pattern.

Q: 4. Does this Wall Mount work with Condenser Mics that require phantom power?

A: Yes it will pass phantom power if your mixer has Phantom power or you purchase the phantom power injector module from RDL

Q: 5. Does it stink?

A: Hello Wayne, Tubetak does not have a strong odor, but it does smell somewhat minty. Compared to other kinds of adhesive, it is very mild and doesn't smell strongly of solvent. It is, however, still advisable to make sure your work area is well ventilated.

Q: 6. How do you apply it to the foam and how do you know how much to use?

A: You will need a standard caulking gun. I applied it by making some zigzags on the hard panels I wanted to glue the foam to. Woked out very well, you don't need to put a lot, but think that the foam it absorb some of the adhesive.

Q: 7. Would this work with a Shure MV7 Podcast Microphone on an Auray BAI-2N Two-Section Broadcast Arm?

A: The Auray RF-5P-R Five-Panel Reflection Filter could be used with the Shure MV7, but it is too large and heavy to mount on a moveable broadcast arm.

Q: 8. Will you be able to see the mount sticking out behind a 32 inch tv?

A: The Gabor TM-SM Tilting Wall Mount for 30 to 50" Flat-Panel Displays BH #GATMSM will not be visible with a 32" television/monitor.

Q: 9. Has anyone actually used this with a script to read? If so,...how did you manage to find space for it????

A: The Auray RF-5P-R Five-Panel Reflection Filter is designed to isolate a microphone from picking up background noises. The panels are adjustable, so if you are in an environment where you don't need to fully enclose the mic, you could adjust one of the sides to have the panels open slightly more so you can place your script at about the same level as the mic.

Q: 10. is this also soundproof?

A: This is not a soundproof system. it is designed to offer a sound-isolation recording solution